Text preview for : ARE049.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Aug. 22, 1997
DIGITAL COPIER : AR-5132
No. : ARE-049
[Service Information]
CHANGE IN AUD INTERF ACE HARNESS WIRING.
1.Model Name:
AR-5132
2.General:
Because the 2P connector harness for the AUD interface harness counter in the control panel unit is too long, it may get caught when the cabinet is being put on during repair. Therefore the changes below have been made to the wiring method.
LCD control PWB
White
AUD interface harness DHAI-2530FCZZ
Red
Wire so it catches on the boss. Door SW
OP PWB
Panel side To OPC PWB
Fastening band
As shown in the diagram above, bend connector C away from fastening band "a", and fasten the harness for connectors B & C 40mm from fastening band a with "a" fastening band.
3.Action:
From the 1st lot of 1997 July production.
1/2
Green C
SHARP CORPORATION
Reprography Division
Current parts Ref. No. Model name Version P/G No. Parts code LBNDJ0013FCZZ (Q'ty: 2)
New parts Parts code Q'ty change: 2 3 Price rank AA Parts name
Effec- Intertive changetime ability 1st lot '97/7
Note
AR-5132
All
2
Fastening band
----
1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.
Parts marked with `` '' is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
2/2