Text preview for : ARE085.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Jun. 22, 1998
DIGITAL COPIER : AR-5132
No. : ARE-085
1. MEASURE TO ALLEVIA PROBLEMS OF THE TONER LEAKING FROM THE TE TONER HOPPER. 2. CHANGE CARRIED OUT IN THE COPY PAPER CASSETTE IN MACHINES BOUND FOR THE CHINESE MARKET. 3. MEASURE TO ALLEVIA PROBLEMS OF CURLING DURING PAPER FEEDING TE OPERA TIONS IN THE ADU UNIT.
1. Measure to alleviate problems of the toner leaking from the toner hopper.
1.Model Name:
AR-5132
2.General:
There have been problems of the toner leaking from the mixing shaft section during toner feeding operations. As a measure to alleviate this problem, the addition of a cover sheet has been carried out.
Attachment standard
Attachment standard
Attachment standard
Hopper cover sheet R Note: <1> All attachment surfaces should be wiped with alcohol. (In particular, care should be exercised to wipe the bottom surfaces of the ribs.) <2> Remove the sheet attached on the two-sided tape, bend surface (B) of the sheet along the bending standard (A) and attach. <3> Attach to the hopper ribs.
3.Action:
Running change from 1998 February production. 1/2
Green C
SHARP CORPORATION
Reprography Division
2. Change carried out in the copy paper cassette in machines bound for the Chinese market.
1.Model Name:
AR-5132/5040
2.General:
The addition of holes for original document tray insertion, and of paper size markings has been carried out to the copy paper cassette of models SF-2025 and 2052 in machines bound for the Chinese market. This action has been carried out as a measure to comply with Chinese standards. In accordance with the change described above a change has also been carried out in the same copy paper cassette of all of the models listed above. It is important to note that with the exception of machines bound for the Chinese market, all other old and new parts are interchangeable.
3.Action:
From the 1st lot of 1998 January production. 3. Measure to alleviate problems of curling during paper feeding operations in the ADU unit.
1.Model Name:
AR-5132
2.General:
Achange has been carried out in the inner diameter of the clutch spring of the calling roller to increase the transport power. This action has been carried out as a measure to alleviate problems of paper curling during ADU paper feeding operations. In addition to the change described above, a change has also been carried out in the color of the spring. The new springs are gray.
3.Action:
From the 1st lot of 1998 April production.
Current parts Ref. No. Model name Version P/G No. Parts code 14 44 -18 GCASP0156FCZ1 2 AR-5132 3 1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others. All 48 -18 31 -13 33 -35 GCASP0154FCZZ MSPRC1006FCZZ GCASP0154FCZ1 MSPRC2714FCZZ BA AC Inner tray case Clutch spring T 1st lot '98/4 3 GCASP0156FCZ2 BC Tray drawer case 1st lot '98/1 1 ---Parts code PSHEP4630FCZZ New parts Price rank AE Parts name Effec- Intertive changeability time * 6
Note
1
AR-5132 AR-5040
Hopper cover sheet R
Q'ty: 2
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
* Running change from 1998 February production. 2/2