Text preview for : ARE091.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Jul. 10, 1998
DIGITAL COPIER : AR-5132
No. : ARE-091
1. CHANGE IN THE SCREWS IN THE OPTICAL UNIT CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. 2. MEASURE TO ALLEVIATE PROBLEMS OF OIL OOZING FROM THE BUSHING IN THE DEVELOPING UNIT . 3. ADDITION CARRIED OUT OF AN ICU COVER SHEET. 4. MEASURE TO IMPROVE OPERATION STABILITY OF THE SHUTTER IN THE TONER BOX. 5. CHANGE CARRIED OUT IN THE MAKER CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY.
1. Change in the screws in the optical unit carried out as a measure to improve productivity.
1.Model Name:
AR-5132
2.General:
Achange has been carried out in a portion of the screws used in the optical unit (in the locations marked with a "O" in the figure shown below). This action has been carried out as a measure to improve productivity.
3.Action:
From the start of 1998 June production.
2. Measure to alleviate problems of oil oozing from the bushing in the developing unit.
1.Model Name:
AR-5132
2.General:
There have been problems of oil oozing from the bushing section of the developing unit which have occurred very rarely, and in accordance with the installation conditions of the machine. This problem, when it occurs, leads to other problems such as black streaks and other image trouble. As a measure to alleviate this problem, a change has been carried out in the material of the bushing.
3.Action:
From 1998 mid-June production. 1/3
Green C
SHARP CORPORATION
Reprography Division
3. Addition carried out of an ICU cover sheet.
1.Model Name:
AR-5132
2.General:
There was a possibility of the optional printer board being attached in such a way that it extended past the protect sheet of the optical section when attaching the ICU cover. As a measure to alleviate this problem the addition of an ICU cover sheet has been carried out.
ICU Cover sheet
3.Action:
From the start of 1998 June production.
4. Measure to improve operation stability of the shutter in the toner box.
1.Model Name:
AR-5040
2.General:
The addition of a shutter return reinforcement spring has been carried out as a measure to stabilize the operation of the shutter of the toner box.
Screw (M3 × 6 ) Shutter SP sheet
Shutter SP-B
3.Action:
From the start of 1998 June production.
5. Change carried out in the maker carried out as a measure to improve productivity.
1.Model Name:
AR-5132/5040
2.General:
Achange has been carried out in the maker of the bearing used in the manual multi paper feeding unit. This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part code.
3.Action:
From the start of 1998 June production.
2/3
Current parts Ref. No. Model name Version P/G No. Parts code 4 -48 1 4 -41 AR-5132 2 3 All ---4 AR-5040 16 15 -7 12 NBRGC0570FCZZ XBPBZ40P06K00 LX-BZ0449FCZZ
New parts Parts code XBPSD40P08KS0 AA XBPSD40P06K00 NBRGC0597FCZZ PSHEP4658FCZZ MSPRC2779FCZZ AL PSHEP4663FCZZ XEBSD30P06000 AA AG AC Screw (M4× 6) Bearing ICU Cover sheet Shutter SP-B Price rank Parts name
Effec- Intertive changetime ability
Note
Screw (M4× 8)
1st lot '98/6 Mid'98/6
1
3
6
Shutter SP sheet 1st lot '98/6 Screw (M3 × 6)
AR-5132 5 AR-5040 1. Interchangeable.
27 -26 NBRGP0266FCZZ 42 -26 NBRGP0598FCZZ AC Bearing 1
4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.
2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
3/3