Text preview for : AR-M236 AR-M276 AR-M237 AR-M277 SERVICE MANUAL.pdf part of Sharp AR-M236_M276_AR-M256_M316_AR-5625_5631 AR-M236 AR-M276 AR-M237 AR-M277 SERVICE MANUAL English
Back to : AR-M236 AR-M276 AR-M237 A | Home
SERVICE MANUAL
CODE: 00ZARM277/A1E
DIGITAL MULTIFUNCTIONAL SYSTEM
AR-M236/M276
MODEL
AR-M237/M277
AR-M236/M276 AR-M237/M277
CONTENTS
[1] NOTE FOR SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [2] SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 [3] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [4] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 [5] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 5-1 [6] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . 6-1 [7] ADJUSTMENTS, SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 [8] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 [9] TROUBLE CODE LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 [10] DISASSEMBLY, ASSEMBLY AND MAINTENANCE . . . . . . . . . . 10-1 [11] OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1 [12] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used for after sales service only. The contents are subject to change without notice.
CONTENTS
[1] NOTE FOR SERVICING 1. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 3. Note for installing site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 CONFIGURATION 1. Product Line and options . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 A. Line of machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 B. Line of options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 C. Combination of options list . . . . . . . . . . . . . . . . . . . . . . . 2-2 SPECIFICATIONS 1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 2. Operation specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 A. Common operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 B. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 3. Engine specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 A. Operation and display section . . . . . . . . . . . . . . . . . . . . . 3-2 B. Paper feed, transport, paper exit section . . . . . . . . . . . . 3-2 C. Optical (Image scanning) section . . . . . . . . . . . . . . . . . . 3-3 D. Scanner (exposure) section . . . . . . . . . . . . . . . . . . . . . . 3-3 E. Image process section . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 F. Fusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 G. Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 4. Additional functions, copy functions, and expanded functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 5. Safety and environmental protection standards . . . . . . . . . 3-4 6. Environment conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 7. IMC board functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 8. "Sharp Printer Language with Compression (SPLC)" Printer function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 A. Basic specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 B. Printer driver specification . . . . . . . . . . . . . . . . . . . . . . . . 3-6 C. Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 D. System outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 CONSUMABLE PARTS 1. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 A. SEC/LAG/SECL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 B. SEEG/SUK/SCA/SCNZ/SEA/SEES/SEZ/SEIS/SEB/ SEN/SEF/SMEF/Russia/Special country . . . . . . . . . . . . 4-1 C. STCL/SRH/SRS/SRSSC/SBI/Agent . . . . . . . . . . . . . . . . 4-2 2. Production number identification . . . . . . . . . . . . . . . . . . . . . 4-3 3. Environment conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 A. Ambient conditions for transporting. . . . . . . . . . . . . . . . . 4-3 B. Ambient storage conditions (sealed) . . . . . . . . . . . . . . . . 4-3 C. Operating ambient conditions . . . . . . . . . . . . . . . . . . . . . 4-3 4. Life (packed conditions). . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 UNPACKING AND INSTALLATION 1. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 A. Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 B. Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 C. Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 D. Other precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 2. Removal of protective material and fixing screw . . . . . . . . . 5-2 3. Removal and storage of fixing pin . . . . . . . . . . . . . . . . . . . . 5-2 4. Developer cartridge installation . . . . . . . . . . . . . . . . . . . . . . 5-3 5. Toner cartridge installation . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 6. Toner density sensor level adjustment . . . . . . . . . . . . . . . . 5-4 7. Tray paper size setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 A. Trays 1 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 B. Manual feed tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 8. Installation of options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 A. AR-P17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 B. AR-PK1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 C. AR-PF1/PF2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 D. AR-NC5J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 E. AR-NS2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 F. AR-SM5/SM6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 [6] EXTERNAL VIEW AND INTERNAL STRUCTURE 1. Name and function of each section . . . . . . . . . . . . . . . . . . A. External view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B. Internal structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D. Job status screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E. Motor, Solenoid, Clutch . . . . . . . . . . . . . . . . . . . . . . . . . F. Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H. Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [7] ADJUSTMENTS, SETTING 1. List of adjustment items . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. Copier adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A. Process section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B. Mechanism section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C. Image density (exposure) adjustment . . . . . . . . . . . . . . 6-1 6-1 6-2 6-2 6-3 6-4 6-4 6-5 6-5 7-1 7-1 7-1 7-2 7-9
[2]
[3]
[8]
SIMULATION 1. Outline and purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 2. Code-type simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 A. Operating procedures and operations . . . . . . . . . . . . . . 8-1 B. How to change the simulation adjustment value set by the touch panel in the adjustment value entry process . . . . 8-1 3. Simulation code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 4. Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 TROUBLE CODE LIST 1. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 2. Self diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
[9]
[4]
[5]
[10] DISASSEMBLY, ASSEMBLY AND MAINTENANCE 1. Maintenance table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 2. Counter clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 3. List of disassembly and assembly . . . . . . . . . . . . . . . . . . 10-1 4. Details of disassembly and assembly . . . . . . . . . . . . . . . . 10-2 A. Process unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2 B. Developing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 C. Fusing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5 D. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6 E. Paper feed section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8 F. Side door unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13 G. 1st paper exit unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14 H. 2nd paper exit unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16 I. Laser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16 J. Power unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-17 K. PWB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-17 L. Ozone filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-19 M. Drive section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 N. Transport section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-22 O. Operation section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-22 P. Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-23 [11] OTHERS 1. Flash ROM version-up procedure. . . . . . . . . . . . . . . . . . . A. Program download method (for Copier, and fax program) . . . . . . . . . . . . . . . . . . . . . B. Printer Control Board firmware download method . . . . C. Others (Troubleshooting) . . . . . . . . . . . . . . . . . . . . . . . 2. Key operator program list . . . . . . . . . . . . . . . . . . . . . . . . . A. Common program of digital copier . . . . . . . . . . . . . . . . B. Copy function setting program . . . . . . . . . . . . . . . . . . . C. Printer function setting program . . . . . . . . . . . . . . . . . . D. Network scanner function setting program. . . . . . . . . . 3. E-mail Status/E-mail Alerts . . . . . . . . . . . . . . . . . . . . . . . . A. Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B. Main body specifications . . . . . . . . . . . . . . . . . . . . . . . C. Printer controller specifications . . . . . . . . . . . . . . . . . . D. Handling of transmission data . . . . . . . . . . . . . . . . . . . 11-1 11-1 11-2 11-3 11-3 11-3 11-4 11-4 11-5 11-6 11-6 11-6 11-6 11-6
[12] ELECTRICAL SECTION 1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1 2. Actual wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
[1] NOTE FOR SERVICING
This Service Manual uses some photographs to assure safe operation. This Service Manual uses some photographs to assure safe operation. Please understand the meanings of photographs before servicing. WARNING: If this WARNING should be ignored, a serious danger to life or a serious injury would be resulted. CAUTION: If this CAUTION should be ignored, an injury or a damage to properties would be resulted.
6) Do not leave the machine with the cabinet disassembled. Do not allow any person other than a serviceman to touch inside the machine. It may cause an electric shock, a burn, or an injury. 7) When servicing, do not breathe toner, developer, and ink excessively. Do not get them in the eyes. If toner, developer, or ink enters you eyes, wash it away with water immediately, and consult a doctor if necessary. 8) The machine has got sharp edges inside. Be careful not to damage fingers when servicing. 9) Do not throw toner or a toner cartridge in a fire. Otherwise, toner may pop and burn you. 10) When replacing the lithium battery of the PWB, use a specified one only. If a battery of different specification is used, it may be broken, causing breakdown or malfunction of the machine. 11) When carrying a unit with PWB or electronic parts installed to it, be sure to put it in an anti-static-electricity bag. It may cause a breakdown or malfunctions.
1. Warning for servicing
1) Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements. Avoid complex wiring, which may lead to a fire or an electric shock. It may cause a fire or an electric shock. 2) If there is any abnormality such as a smoke or an abnormal smell, interrupt the job and disconnect the power plug. It may cause a fire or an electric shock. 3) Be sure to connect the grounding wire. If an electric leakage occurs without grounding, a fire or an electric shock may be the result. To protect the machine and the power unit from lightening, grounding must be made. 4) When connecting the grounding wire, never connect it to the following points. It may cause an explosion, a fire or an electric shock. · Gas tube · Lightning conductor · A water pipe or a water faucet, which is not recognized as a grounding object by the authorities. · Grounding wire for telephone line 5) Do not damage, brake, or work the power cord. Do not put heavy objects on the power cable. Do not bend it forcibly or do not pull it extremely. It may cause a fire or an electric shock. 6) Keep the power cable away from a heat source. Do not insert the power plug with dust on it into a power outlet. It may cause a fire or an electric shock. 7) Do not put a receptacle with water in it or a metal piece which may drop inside the machine. It may cause a fire or an electric shock. 8) With wet or oily hands, do not touch the power plug, do not insert the telephone line jack, do not operate the machine, or do not perform servicing. It may cause an electric shock.
3. Note for installing site
Do not install the machine at the following sites. 1) Place of high temperature, high humidity, low temperature, low humidity, place under an extreme change in temperature and humidity. Paper may get damp and form dews inside the machine, causing paper jam or copy dirt. For operating and storing conditions, refer to the specifications described later. 2) Place of much vibrations It may cause a breakdown. 3) Poorly ventilated place An electro-static type copier will produce ozone inside it. The quantity of ozone produced is designed to a low level so as not to affect human bodies. However, continuous use of such a machine may produce a smell of ozone. Install the machine in a well ventilated place, and ventilate occasionally. 4) Place of direct sunlight. Plastic parts and ink may be deformed, discolored, or may undergo qualitative change. It may cause a breakdown or copy dirt. 5) Place which is full of organic gases such as ammonium The organic photoconductor (OPC) drum used in the machine may undergo qualitative change due to organic gases such as ammonium. Installation of this machine near a diazo-type copier may result in dirt copy. 6) Place of much dust When dusts enter the machine, it may cause a breakdown or copy dirt. 7) Place near a wall Some machine require intake and exhaust of air. If intake and exhaust of air are not properly performed, copy dirt or a breakdown may be resulted. 8) Unstable or slant surface If the machine drops or fall down, it may cause an injury or a breakdown. If there are optional paper desk and the copier desk specified, it is recommendable to use them. When using the optional desk, be sure to fix the adjuster and lock the casters.
2. Precautions for servicing
1) When servicing, disconnect the power plug, the printer cable, the network cable, and the telephone line from the machine, except when performing the communication test, etc. It may cause an injury or an electric shock. 2) There is a high temperature area inside the machine. Use an extreme care when servicing. It may cause a burn. 3) There is a high voltage section inside the machine which may cause an electric shock . Be careful when servicing. 4) Do not disassemble the laser unit. Do not insert a reflective material such as a screwdriver in the laser beam path. It may damage eyes by reflection of laser beams. 5) When servicing with the machine operating, be careful not to squeeze you hands by the chain, the belt, the gear, and other driving sections.
AR-M236/M276/M237/M277 NOTE FOR SERVICING 1 - 1
[2] CONFIGURATION
1. Product Line and options
A. Line of machines
Model name AR-M277/M237 (For SEC/SECL) Composition Copier/Printer (SPLC) model Model name AR-M276/M236 Composition Copier/Printer (SPLC) model
B. Line of options
AR-RP7 Reversing single pass feeder
AR-VR6 Platen cover (OC)
AR-D21 500-sheet paper feed unit
AR-D22 2X500-sheet paper feed unit
AR-TR3 Job separator tray kit
AR-FN5N Finisher
AR-FX7 Facsimile expansion kit
AR-MM9 8MB FAX memory
AR-P17 Printer expansion kit
AR-PK1/N PS3 expansion kit
AR-PF1 Bar code font kit
AR-PF2 Flash ROM kit
AR-NC5J Print server card
AR-NS2 Network scanner expansion kit
AR-SM5 256MB expansion memory board AR-SM6 512MB expansion memory board
AR-M236/M276/M237/M277 CONFIGURATION 2 - 1
C. Combination of options list
: Installable : Not available Section Option Item Model AR-RP7 AR-VR6 AR-D21 AR-D22 AR-TR3 AR-FN5N AR-SC1 AR-FX7 Main unit Model AR-M237/M277 AR-M236/M276 Standard For AR-FN5N FAX board option available only for SEC/SECL/SEEG/SUK/SCA/SEIS/ SEES/SEB/SEN/SEF/SRS/STCL/ SRSSC/Philippines/SRH/SBI/SMEF/ South Africa/Taiwan/SOCC 500 x 1 (80g/m2) 500 x 2 (80g/m2) Note
Automatic document Reversing single pass feeder feeder and OC Platen cover (OC) Paper feed system Paper exit system 500-sheet paper feed unit 2X500-sheet paper feed unit Job separator tray kit Finisher Staple cartridge FAX system Facsimile expansion kit
8MB FAX memory PC-FAX (only sending) Printer system Printer expansion kit Print server card Bar code font kit Flash ROM kit PS3 expansion kit Memory board (From July 2003 onward) Software 256MB expansion memory board 512MB expansion memory board Network scanner expansion kit
AR-MM9 AR-P17 AR-NC5J AR-PF1 AR-PF2 AR-PK1/N AR-SM5 AR-SM6 AR-NS2
The memory of 128MB must be added. The AR-P17 must be installed.
For details of the options, refer to the Service Manual of each option.
AR-M236/M276/M237/M277 CONFIGURATION 2 - 2
[3] SPECIFICATIONS
This model is designed as an SPLC printer, and can be extended for use as a PCL6/PS3/NC/scanner by options. For details, refer to the Service Manual of the AR-P11/AR-PK1/AR-NC5J/AR-NS2.
(3) Copy magnification ratio
· Normal mode Copy magnification ratio Zoom width Fixed magnification mode Magnification range/fixed magnification 25 to 400% (50 to 200% for RSPF) AB Series: 25, 50, 70, 81, 86, 100, 115, 122, 141, 200, 400% 5R+5E (50, 70, 81, 86, 100, 115, 122, 141 and 200% for RSPF) Inch Series: 25, 50, 64, 77, 100, 121, 129, 200, 400% 4R+4E (50, 64, 77, 100, 121, 129 and 200% for RSPF) 25 to 400% for horizontal/vertical (50 to 200% for RSPF)
1. Basic specifications
(1) Type
Machine Type Desktop type
(2) External dimensions
Floor to OC top surface Floor to Glass surface Floor to RSPF surface 623 (W) x 609.5 (D) x 673 (H)mm (24.5 (W) x 24 (D) x 26.5 (H) inch) 623 (W) x 609.5 (D) x 640.5 (H)mm (24.5 (W) x 24 (D) x 25.2 (H) inch) 623 (W) x 609.5 (D) x 785.5 (H)mm (24.5 (W) x 24 (D) x 30.9 (H) inch)
Independent magnification width · 1200 dpi mode Copy magnification ratio Zoom width Fixed magnification mode
(3) Weight
AR-M276/M236 41.8 kg (including DV), 39.8 kg (excluding DV) (92 lbs. (including DV), 87.7 lbs. (excluding DV)) AR-M277/M237 49.3 kg (including DV), 47.3 kg (excluding DV) (108.6 lbs. (including DV), 104.2 lbs. (excluding DV))
Magnification range/fixed magnification 50 to 200% (50 to 141% for RSPF) AB Series: 50, 70, 81, 86, 100, 115, 122, 141, 200% 4R+4E (50, 70, 81, 86, 100, 115, 122 and 141% for RSPF) Inch Series: 50, 64, 77, 100, 121, 129, 200% 3R+3E (50, 64, 77, 100, 121 and 129% for RSPF) 50 to 200% for horizontal/vertical (50 to 141% for RSPF) Normal copy: 100%±1.0% Enlargement copy: Set magnification ±1.0% Reduction copy: Set magnification ±1.0%
(4) Power supply
Voltage Frequency Power switch 100V/110V/120V/127V/230V (common with 200V)/ 240V 50/60Hz common One power source Independent magnification width Magnification precision Under 23 sec. Yes
2. Operation specifications
A. Common operation
(1) Warm up time
Warm-up time Pre-heat function
(4) Job speed
a. First Copy Time Normal Less than 4.8 sec. (when the single copy)
When paper of A4/Letter is fed from the upper cassette of the
(2) Jam recovery time
About 10sec (Leaving the machine for 60 sec after opening the door, standard condition, polygon stop.)
B. Copy mode
(1) Document size
Max. document size A3 paper (11" × 17")
machine and discharged. b. Copy speed Mode 1 scan multi (600 dpi) copy (1200 dpi) Toner save mode Selectable Selectable Selectable -- --
When A4/Letter
(2) Picture quality mode
Picture quality mode Text Auto mode Text mode Text/Photo mode Photo mode Super Photo mode Density adjustment step 1 step 5 steps 5 steps 5 steps 5 steps
AR-M276/M277 27 cpm 13.5 cpm
AR-M236/M237 23 cpm 13.5 cpm
b. Multi copy speed (sheets/minute) Document Size A3 B4 A4 (Horizontal feed) A4 (Vertical feed) B5 (Horizontal feed) B5 (Vertical feed) 11" × 17" 8-1/2" × 14" 8-1/2" × 13" 8-1/2" × 11" (Horizontal feed) 8-1/2" × 11" (Vertical feed) A5/INV
Single-side copy
AR-M276/M277 600 dpi 1200 dpi 15 7.5 17 8.5 27 13.5 18 9 27 13.5 21 10.5 14 7.5 16 8 17 8.5 27 18 27 13.5 9 13.5
AR-M236/M237 600 dpi 1200 dpi 12 7.5 14 8.5 23 13.5 16 9 23 13.5 18 10.5 12 7.5 13 8 14 8.5 23 16 23 13.5 9 13.5
The slowest speed is listed in enlargement/reduction copy.
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 1
(5) Max. multi-copy (print) quantity
999 sheets
· Details of paper feed section Paper feed capacity Paper weight Paper feed size 500 (80 g/m²) 56 to 105 g/m² (15 to 28 lbs) A3/B4/A4/A4R/B5/B5R/A5/16K/16KR/8K 8.5×11/8.5×14/11×17/8.5×13/8.5×11R/8.5×5.5 Standard paper (56 to 80 g/m²), normal paper (80 to 105 g/m²), special paper Recycle paper User operation (Touch panel operation) Yes
(6) Picture quality
a. Image process Picture quality mode Text Auto mode Text mode Text/Photo mode Photo mode Super Photo mode b. Toner save mode Toner save percentage c. Zoom method Main scanning direction Sub scanning direction d. Resolution · Read Main scanning direction 400 dpi · Write Main scanning direction Basic Virtual resolution resolution 600 dpi 1200 dpi Copy magnification ratio 25% to 49% 50% to 69% 70% to 94% 95% to 105% 106% to 141% 142% to 400% e. Gradation Read Write 256 gradations 2 gradations Sub scanning direction Basic Virtual resolution resolution 600 dpi 1200 dpi Position Center -- 3.2 line/mm 3.6 line/mm 5.0 line/mm 5.0 line/mm 5.0 line/mm Corners -- 2.8 line/mm 3.2 line/mm 4.5 line/mm 4.5 line/mm 4.5 line/mm Sub scanning direction 400 dpi Performed through image processing Performed by image processing and changing scanning speed 10% Image process (Software) · 2 gradations · Area separation · Error diffusion Dither
Paper kind Special paper Paper size selection Cassette attachment/ detachment Remarks
A5, 8.5 x 5.5 (only for tray 1) B5 is not applicable to tray 2. 52 to 200 g/m² (14 to 54 lbs) AB Series: A3 to A6R Inch Series: 11"×17" to 8.5"×5.5" Multi feed: Standard paper (52 to 80 g/m²), special paper (Recycle paper/OHP/label paper/postcard/ envelope), thick paper (max. 200 g/m²) Single feed: Standard paper (52 to 128 g/m²), special paper (Recycle paper/OHP/label paper/ postcard/envelope), thick paper (max. 200 g/m²) Yes A3/A4,11,B4/B5,8.5,A4R/A5,B5R,A5R,5.5
· Manual feed section Paper weight Paper Size Paper kind
Size detection Guide display with SIM 44-34.
When poor image quality is resulted by the use of OHP sheet, adjust
(2) Finishing ability
Paper exit section Paper exit face Capacity Full detection Paper detection Finishing E-sort capacity Paper exit tray (1 tray) Face down 500 sheets (A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13: 300 sheets) No Yes Yes 90 sheets (Max. 2970 sheets) of A4 standard documents (Sharp A4 standard document Test Chart B (6%)) 16 sheets (Max. 528 sheets) of A4 standard documents (Sharp A4 standard document Test Chart B (6%)) Depending on the shifter. Available when the finisher is installed.
600 dpi
3. Engine specifications
A. Operation and display section
Display unit Operation system Touch panel Button switch system Offset function Stapling
1200 dpi
B. Paper feed, transport, paper exit section
(1) Paper feed ability
Paper feed section Paper feed capacity Paper feed size Remaining detection 2 cassettes + multi manual feed 500 x 2 + 100 (80 g/m²) AB Series: A3 to A6R Inch Series: 11"×17" to 8.5"×5.5" Cassette section: empty detection only available Manual paper feed section: empty detection only available
(3) Job separator exit tray (AR-TR3)
a. Condition In case of Optional function (printer, FAX) is set up as MFD. b. Simultaneous wrapping in kit Job separator tray Setting manual book c. Simultaneous wrapping Setting manual book d. Function This exit tray is set up above main exit tray, and can separate copier exit, printer exit and FAX exit. e. Many of tray 1 (this tray can not set up more than 2)
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 2
f. Separator system by control of main machine g. Exit paper size Upper exit tray (Job separator tray) Lower exit tray (Main machine exit tray) h. Exit paper weight 52 to 128g/m2 (14 to 34.1lbs) i. Paper pass center (same as main unit) j. Exit area/finishing Upper exit tray (Job separator tray) Lower exit tray (main machine exit tray) k. Power supply Power supply Power consumption l. Method of movement with original motor (not with main machine) m. Machine weight 0.6 kg n. Exit capacity Upper exit tray (Job separator) Lower exit tray (main machine exit tray)
300 sheets except for A4/LT
(6) Scanning speed
122mm/sec (600 dpi: magnification ratio 100%) 61mm/sec (1200 dpi: magnification ratio 100%) AB system Inch system AB system Inch system A3 to A6 11 x 17 to 8.5 x 5.5 A3 to A6 11 x 17 to 8.5 x 5.5
(7) Light source (lamp)
Type Drive voltage Xenon 1.5 kV
(8) Read sensor
Type Reduction optical system image sensor (CCD) Monochrome
D. Scanner (exposure) section
(1) Resolution
Face down Face down Main scanning direction 600 dpi Sub scanning direction 600 dpi
(2) Gradation
DC 24V (from main machine) 5.6W 2 gradations
(3) Laser unit specifications
r.p.m. Mirror surfaces Laser power Laser beam size Laser wave length 28,800 rpm 6 faces 0.4mW/600dpi, 0.2mW/1200dpi 60µ (Main scan) x 70µ (Sub scan) 785nm
100 sheets 500 sheets ()
E. Image process section
Imaging speed Photo conductor Toner Type LIFE Type LIFE 600 dpi : 122 mm/sec. 1200 dpi : 61 mm/sec. OPC drum (dia. 30mm) 75,000 sheets Developer (Black) 25,000 sheets (Toner, life: 25k, Developer life: 75k) () DC scorotron (saw tooth) 560µA constant electric current Transfer roller 18µA (electric current) Xenon lamp Dry, 2-component magnetic brush development () DC scorotron -- Blade
o. Tray full detector Upper exit tray (Job separator) Lower exit tray (main machine exit tray) p. Concept of function Upper exit tray (Job separator) Lower exit tray (main machine exit tray) q. Main color of cabinet Frosty white r. Setting to be easy setting Copy/FAX/Printer (This setting can be done by users.) Copy/Printer/FAX (This setting can be done by users.) Yes Yes
Charge Transfer Exposure Developing Separation Discharge Cleaning
System Voltage System Voltage
C. Optical (Image scanning) section
(1) Type
Flat-bed type/monochrome
F. Fusing
Type Lamp Type Voltage Sub scanning direction 400 dpi Power consumption Fusing temperature Heat roller Pressure roller Separation system Heat roller Halogen lamp 100V 1000W 185° (600 dpi) 160° (1200 dpi) Teflon coated roller Silicone rubber roller with re-engerized cube Natural separation (with pawl)
(2) Document reference position
Rear left reference
(3) Resolution
Main scanning direction 400 dpi
(4) Gradation
256 gradations (8-bit)
(5) Original size/Scanning area
a. Max. original size A3 paper (11" × 17")
G. Drive
Drive section Main motor Motor DC brushless motor
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 3
4. Additional functions, copy functions, and expanded functions
APS AMS Stream feeding mode Job build function Auto tray switching Memory copy (600 dpi) Memory copy (1200 dpi) Rotation copy E-sort XY zoom Yes (No for APS by flow scan with the RSPF) Yes (No for AMS by flow scan with the RSPF) Yes Yes (Copy/Scan) Yes (No for manual paper feed) Yes (1 page memory provided as standard) Yes (1 page memory provided as standard)
Self print function Built-in clock Paper exit tray selection
Yes (The service simulations in the machine and the key operation list are printed.) Yes (When the finisher is installed) Machine: Copy/FAX/*Printer Top tray: Copy/*FAX Offset tray: Printer/*Copy (When the job separator is installed) Machine: *Copy/Printer/FAX Job separator tray: Copy/*Printer/*FAX * Default: (The above setup items for each paper exit tray can be changed by the user.)
1 page memory Yes Yes Yes When the OC is used: Landscape/Portrait 25 400% (50 200% for 1200 dpi) When the RSPF is used: Landscape/Portrait 50 200% (50 141% for 1200 dpi) Yes (No for enlargement) Yes Default AB series: 0 20 mm (Unit of 1 mm) Inch series: 0 1 inch (Unit of 1/8 inch) Yes Default AB series: 0 20 mm (Unit of 1 mm) Inch series: 0 1 inch (Unit of 1/8 inch) Yes Default AB series: 0 20 mm (Unit of 1 mm) Inch series: 0 1 inch (Unit of 1/8 inch) Yes (Printing only) Yes Whole surface only (Can be inhibited with the simulation.) Yes Yes Offset function (shifter or finisher) required Yes (Only when this function is set) Yes (Conditions are set with the key operator program.) Yes (Conditions are set with the key operator program.) Yes Yes Yes (A PCL printer board is required (TCP/ IP only). To use another protocol, an NIC card is required.) Yes (Option only for the models for dealers) Yes Yes (Standard) Yes Yes Yes (100 departments) Yes (10 jobs) Yes (Insertion and stapling must be allowed from manual feed.) Yes (Only printer function) Safety acknowledgement & EMI
48MB
5. Safety and environmental protection standards
(1) Safety and environmental protection standards
Item Environment acknowledgment USA: EnergyStar Canada: ECP, EnergyStar Germany: Blue angel conformity Europe: EnergyStar North Europe: Nordic swan USA: UL/FDA/FCC Canada: cUL/FDA/FCC Europe: CE/SEMKO/ITSGS UK: CE/SEMKO/ITSGS Australia: IEC60950 conformity/C-TICK Taiwan: Taiwan EMI (Class B)/CNS conformity Russia: GOST-R Middle East, Africa: CE conformity/IEC60950 conformity/CISPR22 conformity China: CCC Others: ICube/NOM (Mexico)/FCC conformity/ CISPR22 conformity/IS112/IS961-6.1/2
1 set 2 copy Binding margin
Edge erase
Center frame erase
Booklet copy White/black reversion
2 in 1/4 in 1 Sorter Mix paper feed Preheating Auto power shut off function Message display Key operator program Printer status monitor/Printer administration utility Coin vendor support Auditor support Duplex Total counter Toner save Department management Job registration/call Cover paper OHP insert paper
(2) Ozone level
Ozone Dust Less than 0.02mg/m³ Less than 0.075mg/m³
(3) Noise level
Operating On standby Less than 63dB Less than 40dB
Wireless LAN support Yes (A 3rd party part is recommended.)
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 4
6. Environment conditions
(1) Space required
Folded multi manual feed Open multi manual feed 628 (W) × 585.5 (D) mm 894 (W) × 585.5 (D) mm
7. IMC board functions
* Sort function (Electronic sort) 32MB (Copy: 16MB, Print: 16MB) 90 sheets (max. 1500 sheets) with A4 standard documents at 600dpi, 22 sheets (max. 726 sheets) with A4 standard documents at 1200dpi. Offset paper exit by the shifter function 32MB (Copy: 16MB, Print: 16MB) 90 sheets (max. 1500 sheets) with A4 standard documents at 600dpi, 22 sheets (max. 726 sheets) with A4 standard documents at 1200dpi. Offset paper exit by the shifter function If there is paper of the same size as the document size, the image is rotated and printed even though the paper is set in a different direction. (In some cases, enlargement rotation may not be executed.) Two pages or four pages of documents are copied on one page of paper. Division can be made with slid lines or dotted lines (by user setup). (The solid line width is 8 lines) Images on the edges of the document are erased and copy is made. (Adjustable in the range of 0 20mm (0 1 inch).) The center image of the set document is erased and copy is made. (Adjustable in the range of 0 20mm (0 1 inch).) Binding edge is provided on the left, right or the top of the set document. 32MB
(2) Operating ambient conditions
* Group function
Humidity (%)
Rotation copy
2 in 1/4 in 1
Temperature (°C)
(3) Ambient storage conditions
Edge erase
Center erase
Humidity (%)
Binding edge Compression memory for electronic sort * Memory read 600dpi capacity
Temperature (°C)
(4) Ambient conditions for transporting
32MB (Copy: 16MB, Print: 16MB) 90 sheets (Max. 1500 sheets) of A4 standard documents (Sharp A4 standard document Test Chart B (6%)) 1200dpi 22 sheets (Max. 726 sheets) of A4 standard documents (Sharp A4 standard document Test Chart B (6%)) Memory expansion 2 slots for DIMM memory, Max. 512MB x 2 slots + 32MB (Expandable up to 1056MB) Note: The number of sheets for the columns marked with "*" is calculated supposing that the same quantity is assigned to the ROPM memory and the copy expansion memory.
Humidity (%)
8. "Sharp Printer Language with Compression (SPLC)" Printer function
A. Basic specification
Item Print Speed Detail 15ppm: 600dpi (including transfer from PC) 27ppm: ROPM (AR-M277/M276) 23ppm: ROPM (AR-M237/M236) 600dpi 1200dpi x 600dpi Standard Multi Bypass tray Tray 1, Tray 2, Tray 3, Tray 4 (Depending on conditions of the machine and option installation.) Standard Option Standard Standard IBM PC/AT (Include compatible machine)
Temperature (°C)
(5) Atmospheric pressure
595 mmHg or above
Resolution Smoothing Toner Save Mode Input tray
(6) Standard temperature and humidity
Temperature Humidity 20 to 25°C 65±5%RH Duplex print Finisher Printer driver Manual (Online manual) Platform
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 5
Item Support OS (Printer Driver)
Detail Windows 95/98/Me Windows NT 4.0 Workstation (SP5 or later) Windows 2000 Professional Windows XP Home/Professional Edition
Watermark
Function Watermark
B. Printer driver specification
(1) System
Machine IBM PC/AT (Include compatible machine) OS Windows 95/98/Me Windows NT 4.0 Workstation (SP5 or later) Windows 2000 Professional Windows XP Home/Professional Edition
User setting Position
(2) Printing function specification
General Function Copies Orientation Collate Document Style N-up printing N-up Order N-up Border User Setting Paper Size Content 1-999 Portrait Landscape Collate Uncollate 1-Sided, 2-Sided (Book), 2-Sided (Tablet) 2/4 Z Yes/No Yes A3 / B4 / A4 / B5 / A5 / B6 / A6 / Ledger (11x17) / Legal (8.5 x 14) / Foolscap (8.5 x 13) / Letter (8.5 x 11) / Invoice (5.5 x 8.5) / Folio / Executive / COM-10 / DL / C5 / 8K / 16K 1 size · Auto · Bypass (Auto) · Bypass (Manual) · Tray 1/2/3/4 Tray: Normal paper, letter head paper, recycle paper, colored paper Bypass: Normal paper, letter head paper, recycle paper, colored paper, thick paper, thin paper, label paper, OHP, postcard, envelope Transparency print Yes / No Paper Output Output Tray Selection · Center Tray · Upper Tray Paper Type Staple Print Quality · Finisher Offset tray Yes / No Normal Draft Photo Yes / No Yes / No Yes / No Yes / No Yes / No Brightness : 0 to 100 Contrast : 0 to 100
Size Angle Gray Scale Edit Font On first page only Configuration Input Trays Setting Output Tray Options Set Tray Status Version Information ROPM
Others
Content (None) / TOP SECRET / CONFIDENTIAL / DRAFT / ORIGINAL / COPY Add / Update / Delete Center X: ±50 Y : ±50 6 to 300 ±90 0 to 255 Yes Yes / No Two / Three / Four trays None / Upper Tray / Staple Finisher Yes Yes Yes / No
(3) Print quality
Mode Resolution/Print quality Smoothing Toner Save Mode Photo Enhancement Control 600dpi (Fixed) On* Off On Off* On Off* On Off* Content Print quality is selected from Normal*/Draft/Photo. Smoothing function is ON. Smoothing function is OFF. Toner save function is ON. Toner save function is OFF. Photo enhancement function is ON. Photo enhancement function is OFF. 2-Gradation print function is ON. 2-Gradation print function is OFF.
Paper Input
2 Gradation print * Default
Custom Paper Size Source Selection
Graphic
Smoothing Toner save Photo Enhancement Fit to Page 2 Gradation print Image Adjustment
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 6
(5) Paper handling specifications
a. Paper feed direction Limitations on tray/functions for support paper Paper feed tray Paper name A3 A4 A5 A6 B4 B5 B6 Ledger Letter Legal Executive Folio Invoice Foolscap 8K 16K DL C5 Com10 Custom Paper size 297 x 420 mm 210 x 297 mm 148 x 210 mm 105 x 148 mm 257 x 364 mm 182 x 257 mm 128 x 182 mm 11 x 17 inch 8.5 x 11 inch 8.5 x 14 inch 7.25 x 10.5 inch 8.3 x 13 inch 5.5 x 8.5 inch 8.5 x 13 inch 270 x 390 mm 195 x 270 mm 110 x 220 mm 162 x 229 mm 4.125 x 9.5 inch W: 100 to 297 mm L: 148 to 431.8 mm Manual tray Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Tray 1 Yes Yes Yes N/A Yes Yes N/A Yes Yes Yes N/A N/A Yes Yes Yes Yes N/A N/A N/A N/A Tray 2 Yes Yes N/A N/A Yes Yes N/A Yes Yes Yes N/A N/A N/A Yes Yes Yes N/A N/A N/A N/A Tray 3 Yes Yes N/A N/A Yes Yes N/A Yes Yes Yes N/A N/A N/A Yes Yes Yes N/A N/A N/A N/A Tray 4 Yes Yes N/A N/A Yes Yes N/A Yes Yes Yes N/A N/A N/A Yes Yes Yes N/A N/A N/A N/A Center tray Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Paper exit tray Upper Offset tray tray Yes Yes Yes Yes Yes N/A N/A N/A Yes Yes Yes Yes Yes N/A Yes Yes Yes Yes Yes Yes Yes N/A Yes N/A Yes N/A Yes Yes Yes Yes Yes Yes Yes N/A Yes N/A Yes N/A N/A N/A Function Staple Yes Yes N/A N/A Yes Yes N/A Yes Yes Yes N/A N/A N/A Yes N/A N/A N/A N/A N/A N/A Fit page Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes N/A
Setting direction toward paper feed port = Long side
Setting direction toward paper feed port = Short side
Transfer direction
Transfer direction
(6) Print enable area
Actual page size Print area Logic paper size HP/GL picture frame
Paper Size A3 B4 A4 B5 A5 Ledger Legal Letter Invoice Foolscap Folio Executive COM-10 C5 DL
A 7014 6070 4960 4298 3508 6600 5100 5100 3300 5100 4980 4350 2474 3826 2598
B 9920 8597 7014 6070 4960 10200 8400 6600 5100 7800 7800 6300 5700 5408 5196
C 6730 5786 4676 5770 3224 6300 4800 4800 3000 4800 4680 4050 2174 3542 2314
D 142 142 142 142 142 150 150 150 150 150 150 150 150 142 142
E 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
F 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300
G 6814 5870 4760 4098 3308 6400 4900 4900 3100 4900 4780 4150 2274 3626 2398
H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 7
(7) Print reference
Actual page size Print area Logic paper size HP/GL picture frame
This machine employs the center reference system. Since the digital copier is not provided with the tray size detection feature, formatting and center distribution are performed not by the actual paper size but by the paper size specified by the computer.
Origin Paper feed direction
ABCDEFGHIJKLMN 12345 abc
Actual paper size
Size specified by the HOST
Center reference line
Paper Size A3 B4 A4 B5 A5 Ledger Legal Letter Invoice Foolscap Folio Executive COM-10 C5 DL
Top margin
A 9920 8597 7014 6070 4960 8400 8400 6600 5100 7800 7800 6300 5700 5408 5196
B 7014 6070 4960 4298 3508 5100 5100 5100 3300 5100 4980 4350 2474 3826 2598
C 9684 8361 6778 5830 4720 8160 8160 6360 2860 7560 7560 6060 3460 5172 4960
D 118 118 118 118 118 120 120 120 120 120 120 120 120 118 118
E 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
F 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300
G 9720 8397 6814 5870 4760 8200 8200 6400 4900 7600 7600 6100 5500 5208 4996
H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
C. Interface
Interface IEEE 1284 (Parallel interface) USB Ver. 2.0
D. System outline
The GDI-PWB is provided with IEEE1284 I/F on the host side, and the 16-bit bi-directional data bus I/F and UART on the machine side. Transfer of image data with the IMC-PWB is performed with this 16-bit bi-directional data bus. Command status information with the engine is processed with UART. This unit is installed to the position of PCL-PWB on the conventional AR-235/275. JBIG compression data sent from the host are transferred to the IMC PWB, where the data are extracted to be VIDEO data, and sent through the MCU PWB to the LSU.
M-bus CCD MCU
Print Engine Image process ASIC UART Command status
The set value is received from the digital copier, and data are made according to the set value.
Left margin
CPU
Since the paper size sensor is not set, the digital copier cannot recognize the size and direction of paper which is actually inserted. Therefore, the left margin is set according to the paper size specified in the print data sent from the computer, and print process is performed. If the computer does not specify the paper size, or in the case of the custom size, the left margin is set according to the default paper size.
IMC
Page memory
CPU JBIGLite
JBIG data
GDI CPU ASIC
IEEE1284 Header + JBIG data PC
Extraction
Compressed memory Data through : Data flow
JBIG printer driver
AR-M236/M276/M237/M277 SPECIFICATIONS 3 - 8
[4] CONSUMABLE PARTS
1. List
A. SEC/LAG/SECL
No. Item Content 1 Toner CA (black) w/IC Toner Vinyl bag 2 Developer Developer (Developer; Net weight 500g) 3 Drum kit Drum 4 Upper heat roller kit Upper heat roller Fusing gear Upper heat roller bearing Upper cleaning pad Fusing separation pawl (upper) 5 Lower heat roller kit Lower heat roller Fusing separation pawl (lower) Fusing busing (lower) 6 150K maintenance kit Drum separation unit Transfer roller unit DV seal DV side sheet N DV side sheet N2 DV side mylar 7 MC unit MC unit 8 Cleaner blade Cleaner blade 9 Drum frame unit Drum frame unit ×10 ×10 ×10 ×1 ×1 ×1 ×2 ×1 ×4 ×1 ×4 ×2 ×2 ×1 ×1 ×1 ×1 ×2 ×10 ×10 ×1 Life 25K (×10) 75K (×10) 75K 150K Model name Remarks AR-270MT Life setting by A4 (8.5"×11") 6% document MT=NT*10 AR-271MD MD=ND*10 AR-271DR AR-272UH
300K
AR-272LH
150K
AR-272KA1
75K (×10) 75K (×10) 225K
AR-270MC AR-270CB AR-272DU
The life of the toner reception seat welded to the
drum frame is 225K, and it can be used up to 3 times. (Supplied as a drum frame unit.)
Drum frame unit contains all the drum unit parts
10 Staple cartridge 11 Transfer roller unit 12 Paper feed roller kit 13 Fusing unit
Staple cartridge Transfer roller unit Paper feed roller kit Fusing unit (120V heater lamp)
×3 3000 staples ×3 ×1 150K ×1 100K ×1 150K
AR-SC1 AR-272TX AR-271IR AR-272FU
excluding Drum and Drum fixing plate. For AR-FN5N (For 30 sheets staple)
The other maintenance parts than the above are supplied as service parts.
B. SEEG/SUK/SCA/SCNZ/SEA/SEES/SEZ/SEIS/SEB/SEN/SEF/SMEF/Russia/Special country
No. Item Content 1 Toner CA (black) w/IC Toner Vinyl bag 2 Developer Developer (Developer; Net weight 500g) 3 Drum kit Drum 4 Upper heat roller kit Upper heat roller Fusing gear Upper heat roller bearing Upper cleaning pad Fusing separation pawl (upper) 5 Lower heat roller kit Lower heat roller Fusing separation pawl (lower) Fusing busing (lower) 6 150K PM kit Drum separation unit Transfer roller unit DV seal DV side sheet N DV side sheet N2 DV side mylar 7 MC unit MC unit 8 Cleaner blade Cleaner blade 9 Drum frame unit Drum frame unit ×10 ×10 ×10 ×1 ×1 ×1 ×2 ×1 ×4 ×1 ×4 ×2 ×2 ×1 ×1 ×1 ×1 ×2 ×10 ×10 ×1 Life 25K (×10) 75K (×10) 75K 150K Model name Remarks AR-270LT Life setting by A4 (8.5"×11") 6% document LT=T*10 AR-271LD LD=DV*10 AR-271DM AR-272UH
300K
AR-272LH
150K
AR-272KA
75K (×10) 75K (×10) 225K
AR-270MC AR-270CB AR-272DU
The life of the toner reception seat welded to the
drum frame is 225K, and it can be used up to 3 times. (Supplied as a drum frame unit.)
Drum frame unit contains all the drum unit parts
10 Staple cartridge 11 Transfer roller unit
Staple cartridge Transfer roller unit
×3 3000 staples ×3 ×1 150K
AR-SC1 AR-272TX
excluding Drum and Drum fixing plate. For AR-FN5N (For 30 sheets staple)
The other maintenance parts than the above are supplied as service parts.
AR-M236/M276/M237/M277 CONSUMABLE PARTS 4 - 1
C. STCL/SRH/SRS/SRSSC/SBI/Agent
No. 1 2 3 4 Item Toner CA (black) w/IC Toner Vinyl bag Developer Drum kit Upper heat roller kit Developer (Developer; Net weight 500g) Drum Upper heat roller Fusing gear Upper heat roller bearing Upper cleaning pad Fusing separation pawl (upper) Lower heat roller Fusing separation pawl (lower) Fusing busing (lower) Drum separation unit Transfer roller unit DV seal DV side sheet N DV side sheet N2 DV side mylar MC unit Cleaner blade Drum frame unit Content ×10 ×10 ×10 ×1 ×1 ×1 ×2 ×1 ×4 ×1 ×4 ×2 ×2 ×1 ×1 ×1 ×1 ×2 ×10 ×10 ×1 Life 25K (×10) 75K (×10) 75K 150K Model name AR-270CT AR-271CD AR-271DR AR-272UH Remarks Life setting by A4 (8.5"×11") 6% document CT=ST*10 CD=SD*10
5
Lower heat roller kit
300K
AR-272LH
6
150K PM kit
150K
AR-272KA
7 8 9
MC unit Cleaner blade Drum frame unit
75K (×10) 75K (×10) 225K
AR-270MC AR-270CB AR-272DU
The life of the toner reception seat welded to the
drum frame is 225K, and it can be used up to 3 times. (Supplied as a drum frame unit.)
Drum frame unit contains all the drum unit parts
excluding Drum and Drum fixing plate. 10 Staple cartridge Staple cartridge ×3 3000 staples ×3 AR-SC1 For AR-FN5N (For 30 sheets staple)
The other maintenance parts than the above are supplied as service parts.
AR-M236/M276/M237/M277 CONSUMABLE PARTS 4 - 2
2. Production number identification
The label on the TD cartridge shows the date of production.
3. Environment conditions
A. Ambient conditions for transporting
Unit version Destination The end digit of production year
September October November December
9 0 X Y
Humidity (%)
Serial number (0001-9999)
Production month 1 January
Label position
The laser print indicates the date (year, month, day) of production.
Temperature (°C)
C. Operating ambient conditions
Humidity (%)
Humidity (%)
~
~
Temperature (°C)
B. Ambient storage conditions (sealed)
Use environment conditions
1 1 2 3
2
3
Temperature (°C)
The last digit of the production year. The production month. X stands for October, Y November, and Z December. The production sub lot.
4. Life (packed conditions)
Photoconductor drum (36 months from the production month) Developer, toner (24 months from the production month)
AR-M236/M276/M237/M277 CONSUMABLE PARTS 4 - 3
[5] UNPACKING AND INSTALLATION
1. Installation
A. Environment
The performance of this machine is affected by the environment of the installing site. Avoid installation to the following places: · Avoid installation in direct sunlight, otherwise the plastic parts may be deformed.
· Avoid installation to a place where there is ammonium gas. Installation near a diazo-copier may lead to dirty copy.
· Be sure to have enough space around the machine. Be sure to allow the required space around the machine for servicing and proper ventilation.
12" (30cm)
12" (30cm)
· Avoid installation in a place of high temperature, high humidity, low temperature or low humidity, otherwise paper may be dampened and frost may be generated in the machine to cause a paper jam and dirty copy.
12" (30cm)
B. Power source
· Be sure to use only the power outlet (with the earth terminal) of 15A or more and 100V. · Install the machine near the power outlet to facilitate disconnection of the power plug. · If the power plug of this machine and other illuminating apparatus are connected to the same power outlet, the lamp may flicker. Use an exclusive power outlet for this machine without connecting another lamp together. · Avoid complex wiring. Be careful not to damage, break, or process the power cord.
· Avoid installation in a dusty place, otherwise dust may enter the machine to cause dirty copy or machine troubles.
· Avoid installation to a place with much vibration, otherwise the machine may cause troubles. · Earth wire connection Be sure to connect the earth wire for protection against danger. If not, a leakage may cause a fire or an electric shock.
Earth terminal
· Avoid installation to a place of poor ventilation.
C. Transport
· When transporting the machine, use manpower of two persons to hold the grips on the both sides of the machine with both hands.
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 1
D. Other precautions
· If the machine produces smoke or bad smell, stop the operation of the machine.
· When the exclusive table (option) is used, be sure to use the adjusters (4 pcs.) on the floor. When it is required to move the machine for rearrangement of the office, etc., release the adjuster locks and move the machine.
Adjuster
· Do not use flammable spray near the machine. · Do not remove the cabinet of the machine. · Do not put a receptacle with water in it or metal pieces, which may drop inside the machine, causing a trouble. · The fusing section is heated to a high temperature. When removing a paper jam, be careful not to touch the fusing section.
Lock
Release
Fusing section
· When it thunders, turn off the power and disconnect the power plug from the power outlet to prevent against an electric shock or a fire caused by lighting damage. · If a piece of metal or water enters the machine, turn off the power and disconnect the power plug from the power outlet. · Do not touch the power plug with a wet hand.
· When the machine is not used for a long time, disconnect the power plug from the power outlet for safety. · When transporting the machine, turn off the power and disconnect the power plug from the power outlet. (Remove the earth wire after disconnecting the power plug from the power outlet.)
2. Removal of protective material and fixing screw
1) Remove all tapes, then open the document cover and remove the protective material of sheet shape. · Do not remodel the machine. · Be careful not to pinch your fingers when closing the front cover or the side cover and setting the paper feed tray to supply paper or process a paper jam. 2) Use a screwdriver to remove the fixing screw. The fixing screw is required when transporting the machine. Keep it in the tray. (Refer to the later description.)
3. Removal and storage of fixing pin
1) Lift the knob and gently pull out the tray. · When disconnecting the power plug from the power outlet, do not pull the cord.
· Do not throw toner or the toner cartridge into a fire. · Keep toner or the toner cartridge away from the children.
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 2
2) Hold the paper pressure plate and turn the fixing pin in the arrow direction.
4) Rotate the MG roller in the arrow direction and supply developer evenly into the developing unit.
3) Store the removed fixing pin and the fixing screw which was removed in the above procedure, together in the specified storage place in the tray.
MG roller
Shake the developer bag enough before opening it. Check that the DV seal is free from developer. If developer is attached to the DV seal, clean and remove it. 5) Attach the developer tank to the developer cartridge.
Fixing pin
After supplying developer into the developer cartridge, do not tilt or shake the developer cartridge. 6) Attach the developer cartridge to the copier, and fix it with the screw. Note: When replacing the OPC drum with a new one, be sure to clear the drum count.
5. Toner cartridge installation
Fixing screw
1) Remove the toner cartridge from the bag, shake it about 20 times horizontally, and remove the tape.
Shake about 20 times.
If power is turned don without removing the fixing pin, it will be difficult to pull out the tray.
4. Developer cartridge installation
1) Hold the both sides of the front cover, and pull down to open it.
Shutter
Tape
When holding the toner cartridge, do not touch the shutter section, but hold the grips. Do not remove the tape before shaking the cartridge. 2) Press the lock release lever, and insert the unit completely into the copier along the guide groove. Then fix the blue screw and the locking screw.
2) Loosen the blue screw and pull out the developing cartridge.
3) Remove the developer tank from the developer cartridge.
Dirt or dust must be removed from the toner cartridge before installing. AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 3
3) Remove the tape from the shutter, and remove the shutter from the toner cartridge. Dispose the removed shutter.
4) Select the tray in which you loaded paper. If the desired tray does not appear in the display, use the [] key or [] key to scroll until it appears.
TYPE / SIZE TRAY 1 PLAIN / 8½ x 11
TRAY 2 TRAY 3
PLAIN / 8½ x 14 PLAIN / 11x17
5) Select the size and type of paper that is loaded in the tray.
6. Toner density sensor level adjustment
1) Open the cover with the power OFF. 2) Power ON (The mechanism cannot be initialized because the cover is open.) 3) Install the developing unit with new developer in it. 4) Enter SIM 25-2. (# C 25 START 2 START) 5) Close the cover immediately before starting the operation. 6) Press the [START] key to start. After completion of the adjustment, be sure to cancel the simulation. Note: When replacing developer with new one, be sure to clear the developer counter.
The currently selected paper type will be highlighted. · To change the paper type selection, touch the appropriate type key. · To change the paper size selection, touch the appropriate size key. · To change the displayed size selections to AB sizes, touch [AB INCH].
CUSTOM SETTINGS TRAY 1 TYPE/SIZE SETTING TYPE PLAIN RECYCLED LETTER HEAD COLOR 11x17 8½x11 SIZE 8½x14 8½x11R AB OK INCH 8½x13 5½x8½
7. Tray paper size setting
When the tray paper size is changed, set the tray paper size in the following procedure. During temporary halt due to paper empty or a paper jam or during interruption copy, the paper size setting cannot be made. During FAX data output (when the FAX function is provided) or during printing (when the printing function is provided), the paper size setting cannot be made even in the copy mode. Note: A5 (5 1/2" x 8 1/2") size paper can be set only to the first tray and the manual feed tray. B5 size paper cannot be set to the second tray. (B5R size paper can be set.)
6) Touch the [OK] key. 7) A message appears prompting you to check the paper in the tray. Check the paper and then touch the [OK] key. You will return to the tray settings screen.
B. Manual feed tray
1) Set paper on the tray. 2) Press the [CUSTOM SETTINGS] key. The custom settings menu screen will appear.
LINE DATA B STATUS CUSTOM SETTINGS
A. Trays 1 4
1) Set paper on the tray. 2) Press the [CUSTOM SETTINGS] key. The custom settings menu screen will appear.
LINE DATA B STATUS CUSTOM SETTINGS
3) Touch the [TRAY SETTINGS] key. The tray settings screen will appear.
TOT L COUNT CONTRA ADDRES CONTRO
TRAY SETTINGS
3) Touch the [TRAY SETTINGS] key. The tray settings screen will appear.
TOT L COUNT CONTRA
KEYBOARD SELECT
KEY
4) Touch the [BYPASS TRAY] key.
TRAY SETTINGS ADDRES CONTRO
TRAY 4 TYPE / SIZE PLAIN / 11x17
KEYBOARD SELECT
KEY
BYPASS TRAY PLAIN
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 4
5) Select the type of paper that is loaded in the tray. Touch the appropriate paper type key.
CUSTOM SETTINGS BYPASS TRAY TYPE SETTING SELECT THE PAPER TYPE. PLAIN RECYCLED HEAVY PAPER LETTER HEAD COLOR THIN PAPER ENVELOPE LABELS TRANSPARENCY JAPANESE P/C OK
2) Cut and remove the cut-out portion from the left rear cabinet. Cut and remove the cut-out portion from the left rear cabinet using a tool such as nippers. (Be careful about the direction of the tool so that the cut surface is flat.)
6) Touch the [OK] key. You will return to the tray settings screen.
Cut-out portion
8. Installation of options
A. AR-P17
(1) Parts included
3) Attach the PCL PWB unit. CD-ROM: 1 pc. Operation manual Installation caution sheet Attach the support post to the mounting plate of machine options. Then connect the PCL PWB connector to the mother board connector and fit the PCL PWB with the six screws with M3 spring washer (packed with the unit). Then, attach the parallel and USB connector portion using the supplied three screws.
PCL PWB: 1 pc.
M3 screws with spring washer
M3 screws: 3 pcs. (For installation of the parallel and the USB connectors) M3 screws with spring washer: 6 pcs. (For installation of the PCL PWB)
Support post
M3 screw
Support post: 2 pcs.
M3 screws
(2) Installation procedure
Turn off the main switch of the copier and then remove the power plug of the copier from the outlet. 1) Remove the shielding plate. Remove five screws and remove the shielding plate.
PCL PWB M3 screws with spring washer
4) Attach the shielding plate. Attach the shielding plate using five screws.
Screws
Screws
Screws
Screws
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 5
Insert the power plug of the copier to the outlet and turn on the main switch. Then, carry out the following procedure. 5) Check for the PCL PWB. Press the PRINT key on the operation panel to check to see if the copier enters the print mode. 6) Check for the language. Check for the language setting (26-22) following the procedure described in the service manual (section of simulation). 7) Check for printing. For installation of printer drivers on a computer, see the supplied operation manual. Then, connect a parallel cable to the computer and execute printing to check to see if printing can be executed properly.
· Press Special Functions , highlight Configuration and press OK. · Use the up and down keys to highlight Test print menu and press OK. · Use the up/down keys to highlight Configuration page and press OK. A configuration page will be printed. Check that the option memory capacity is 128 MB or more. Check that the PS3 has been installed.
Please keep below important information. This information will use for other products.
(3) Mounting of additional memory
(After mounting it, Installation proceed to step 4.) Insert the memory module until it clicks. The memory module is lock when it is inserted. However, be sure to check that the module slit is engaged with the connector rib when it is inserted.
APPLICATION NUMBER MACHINE SERIAL NUMBER PRODUCT KEY
C. AR-PF1/PF2
(1) Parts included
AR-PF1
Memory module (S.O.DIMM)
Bar code board: 1 pc. AR-PF2
CD-ROM: 1 pc. Operation manual Installation caution sheet
B. AR-PK1
(1) Parts included
CD-ROM: 1* License agreement Installation caution sheet *NOTE: Do not use the CD-ROM packed in AR-PK1, but use the CDROM packed together with the AR-P17 for setting the PS driver. Operation manual Installation caution sheet Flash ROM board: 1 pc.
(2) Installation
Turn off the main switch of the copier and then remove the power plug of the copier from the outlet. 1) Remove the shielding plate. Remove five screws and remove the shielding plate.
(2) Installation procedure
To enable the PS3, the product key must be acquired. (For the method of acquiring the product key, contact the SHARP authorized dealer.) 1) Check that AR-P17 operates normally. · Turn on the power and wait until warming up is complete. · Press the PRINT key on the operation panel of the main unit. · If the LCD in the operation panel of the main unit switches to the print mode normally, AR-P17 is operating normally. · If it is not operating normally, follow the AR-P17 Installation Manual to check and modify the system configuration settings and check the operation. 2) Enable the PS3. To enable the system configuration, use the keys on the main unit to set the mode. Enter the product key with the key operator program. (Refer to the Operation Manual of Key Operator Program.) Setting of the product key is complete. To update the system, press the CA key to exit the setting mode. 3) Check the PS3. Make the following sequence of selections on the control panel.
Screws
Screws
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 6
2) Attach the bar code board/flash ROM. Attach the bar code board/flash ROM board to CN7 of the printer board.
(4) Check when installing the AR-PF2
Check can be made by print out of the printer setting list. The expansion font item in the printer setting list is changed from "uninstalled" to "download font."
D. AR-NC5J
Bar code board/ Flash ROM board/ Font ROM board
(1) Connection to a network
To connect the AR-NC5J to a network, the following items are required. · For connection in the 100BASE-TX environment, a hub conforming to 100BASE-TX and a shield-type, twisted-pair cable (Category 5) are required.
7 5 6 3 4 1 2
8
3) Attach the shielding plate. Attach the shielding plate using the five screws.
Hub
Shield-type, twisted-pair cable
1) Check that the printer power is off, and connect the shield-type, twisted-pair cable to the 10/100BASE connector of the AR-NC5J. 2) Connect the other end of the cable to the hub. 3) Turn on the printer power, and check that the printer operates normally.
(2) Parts included
Screws
Print server card: 1 pc.
Screws (silver) M3 x 8: 2 pcs. Operation manual
Screws
CD-ROM: 1 pc.
Spacers: 2 pcs. (only the one is used) Installation caution sheet
(3) Installation procedure
Insert the power plug of the copier to the outlet and turn on the main switch. Then, carry out the following procedure. 4) Check the bar codes. (AR-PF1 only) Use the operation keys on the operation panel to print the PCL font list from the test page printing. Check that the optional font list is printed at the end. In this case, no spacer is used in the packed items of the AR-NC5J. Turn off the main switch of the copier and then remove the power plug of the copier from the outlet. 1) Remove the shielding plate. Remove five screws and remove the shielding plate.
(3) Font list
Font No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Font No. Code128TT-Regular 15 Code128-NarrowTT-Regular 16 Code128-WideTT-Regular 17 Code39HalfInch-Regular 18 Code39OneInch-Regular 19 Code39QuarterInch-Regular 20 Code39SmallHigh-Regular 21 Code39Slim-Regular 22 Code39SmallLow-Regular 23 Code39SmallMedium-Regular 24 Code39Wide-Regular 25 Codabar-Regular 26 Interleaved2of5-Regular 27 Interleaved2of5-Thin-Regular 28 Font name Font name OCR-A OCR-B OCR-B-C39-Regular Upc-Half Upc-Half-Bars Upc-HalfMusic Upc-HalfNarrow Upc-HalfThin Upc-Tall-Regular Upc-TallBarsThin-regular Upc-TallMusicThin-Regular Upc-TallNarrow-Regular Upc-TallThin-regular ZipCodeBarcode-Regular
Screws
Screws
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 7
2) Cut and remove the cut-out portion from the left rear cabinet. Cut and remove the cut-out portion from the left rear cabinet using a tool such as nippers. (Be careful about the direction of the tool so that the cut surface is flat.)
5) Connect the cable to the control PWB. Connect a LAN cable to the connector of the print server card.
LAN cable Cut-out portion
Insert the power plug of the copier to the outlet and turn on the main switch. Then, carry out the following procedure. 6) Check for the print server card. 3) Attach the print server card. Align the connector positions, connect the print server card, and then secure the card to the option mounting plate in the main unit using supplied two silver screws (M3 x 8). Use the keys on the operation panel to print a configuration page. Check that the network interface card has been installed. 7) Check for printing. Perform setup of the environmental variables. (For installation of printer drivers on a computer and network settings (IP address input), see the supplied operation manual.) Execute printing to check to see if printing can be executed properly.
E. AR-NS2
(1) Packed items
Silver screws (M3 x 8)
This network scanner kit includes the following items in the package. · CD-ROM (Network Scanner Tool and Sharpdesk, Installer, Sharp TWAIN driver, etc.) · Installation caution sheet and Operation Manual (License numbers of 10 user client