Text preview for : ve_abis_ta-1_1l_flyer_en.pdf part of Abis TA-1 TA-1L TA-1 TA-1L Tonearm
Back to : ve_abis_ta-1_1l_flyer_en. | Home
TA-1 and TA-1L Tonearm The major key to tonearm quality is the sensitivity and stability in retrieving delicate signals, for which the bearings are the determining factor. The TA-l employs a miniature radial bearing for horizontal movement and a miniature pivot bearing for vertical movement. Very high performance is achieved at a reasonable price. The body is constructed from a machine-tooled solid aluminum block. The hand-assembled arm wand satisfies every vital condition necessary for vibration-free and noise-free reproduction. Reproduced sound is precise and clean, thanks to hand assembly by highly skilled craftsmen. Comes with detachable headshell, phono cable (RCA output plug, or optionally as XLR), screws, washers, wrench and marking pin.
No tricks. No exaggeration. Superior sound through perfect execution.
TA-1 Total Length: 288rnrn Spindle to pivot distance: 216mm Stylus to pivot distance: 232mm Overhang 16mm Cartridge weight range: 15-29 grams with headshell Total weight 580g (with headshell attached: 597g) Antiskating up to 3 grams TA-1L Total Length: 380rnrn Spindle to pivot distance: 310mm Stylus to pivot distance: 322mm Overhang 12mm Cartridge weight range: 15-24 grams with headshell Total weight 610g (with headshell attached: 627g) Antiskating up to 3 grams
Custom made in Japan for: Sibatech, Tokyo, Japan.