Text preview for : hfe_aiwa_csd-a110_a170_a100_a99_service_revision_en.pdf part of Aiwa CSD-A170 CSD-A110 CSD-A100 CSD-A99 COMPACT DISC RADIO CASSETTE RECORDER service manual
Back to : hfe_aiwa_csd-a110_a170_a1 | Home
CSD-A170 U(S),K(S),HA(S)
CSD-A110 EZ(S,L),HR(S)
K(S),EZ(S,L,P)
CSD-A100 ,HE(S),HT(S)
CSD-A99 K(S)
SERVICE MANUAL
COMPACT DISC RADIO BASIC TAPE MECHANISM : ZZM-1 YR2NF
CASSETTE RECORDER BASIC CD MECHANISM : DA11T3C
This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
CSD-A100 K(S),EZ(S)/A110 EZ(S)/A170 K(S)(S/M Code No. 09-003-342-2T2)
CSD-A170 U(S),HA(S)/A110 EZ(L),HR(S)/A100 HE(S),HT(S),EZ(L,P)/A99 K(S)
(S/M Code No. 09-003-342-2T4).
N
SIO
VI
RE
TA
DA
S/M Code No. 09-003-342-2R2
SPECIFICATIONS
HR, HE MODELS K, EZ MODELS
· Design and specifications are subject to change
without notice .
· Design and specifications are subject to change
without notice .
HA MODEL U MODEL
· Design and specifications are subject to change
without notice .
· Design and specifications are subject to change
without notice .
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the CAUTION
instructions below when servicing. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
WARNING! radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO ATTENTION
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE L'utilisation de commandes, réglages ou procédures autres que
FROM A DISTANCE OF MORE THAN 30cm FROM THE ceux spécifiés peut entraîner une dangereuse exposition aux
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL radiations.
PICK-UP BLOCK.
ADVARSEL!
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
Caution: Invisible laser radiation when
af funktion. Undgå udsættelse for stråling.
open and interlocks defeated avoid expo-
sure to beam.
This Compact Disc player is classified as a CLASS 1 LASER
Advarsel:Usynling laserståling ved åbning,
product.
når sikkerhedsafbrydere er ude af funktion.
The CLASS 1 LASER PRODUCT label is located on the rear
Undgå udsættelse for stråling.
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-
ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-
tävälle näkymättömälle lasersäteilylle.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
VARNING! LUOKAN 1 LASER LAITE
Om apparaten används på annat sätt än vad som specificeras i KLASS 1 LASER APPARAT
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
Precaution to replace Optical block
(SF-P101NR)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
PICK UP ASSY
SF-P101NR
1
16
Solder
TO/FROM CD C.B
3
ELECTRICAL MAIN PARTS LIST
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
C247 87-010-401-080 CAP, ELECT 1-50V
C248 87-010-401-080 CAP, ELECT 1-50V
IC C310 87-010-248-080 CAP, ELECT 220-10V
C316 87-010-263-080 CAP, ELECT 100-10V
87-A20-955-010 IC,LA1828 C317 87-015-819-080 CAPACITOR,0.01
87-A21-064-010 IC,LA4227
87-A21-520-040 C-IC,M61509FP C322 87-010-260-080 CAP, ELECT 47-25V
<110HRJ(S),110EZ(S),110EZ(L),170U(S),170K(S),170HA(S)> C483 87-012-156-080 C-CAP,S 220P-50 CH
87-A21-443-040 C-IC,M62495AFP C484 87-012-156-080 C-CAP,S 220P-50 CH
C801 87-010-248-080 CAP, ELECT 220-10V
87-A20-446-010 C-IC,LA9241ML C805 87-012-365-080 C-CAP,S 0.027-25VBK
87-A20-459-010 C-IC,LC78622ED C806 87-012-365-080 C-CAP,S 0.027-25VBK
87-A21-093-010 IC,LA6541D C807 87-010-405-080 CAP, ELECT 10-50V
8A-CD9-610-010 C-IC,LC865516A-5P16 C808 87-010-405-080 CAP, ELECT 10-50V
87-A20-650-010 IC,RPM6938-V11 C809 87-010-401-080 CAP, ELECT 1-50V
<170U(S),170K(S),170HA(S)> C810 87-010-401-080 CAP, ELECT 1-50V
87-A21-607-010 IC,NJM14558LD
C811 87-010-178-080 CHIP CAP 1000P
C812 87-010-178-080 CHIP CAP 1000P
TRANSISTOR C816 87-010-180-080 C-CER 1500P
C817 87-010-180-080 C-CER 1500P
89-327-143-080 TR,2SC2714 (0.1W) C821 87-010-401-080 CAP, ELECT 1-50V
87-026-447-080 TR,2SC1740S R
87-026-463-080 TR,2SA933S (0.3W) C822 87-010-401-080 CAP, ELECT 1-50V
87-026-213-080 CHIP-TR,DTC114YK C823 87-010-178-080 CHIP CAP 1000P
89-318-154-080 TR,2SC1815 (0.4W) C824 87-010-178-080 CHIP CAP 1000P
C829 87-010-178-080 CHIP CAP 1000P
89-112-965-080 TR,2SA1296 (0.75W) C830 87-010-178-080 CHIP CAP 1000P
87-026-291-080 TR,DTC124XS
89-213-702-010 TR,2SB1370 (1.8W) C833 87-018-195-080 CAP, CER 1200P-16V
87-026-462-080 TR,2SC1740 S(RS 0.3W) C834 87-010-248-080 CAP, ELECT 220-10V
89-109-332-380 TR,2SA933RS C843 87-010-197-080 CAP, CHIP 0.01 DM
C844 87-018-124-080 CAP, CER 270P-50V
89-113-187-080 TR,2SA1318TU C845 87-010-178-080 CHIP CAP 1000P
87-026-295-080 TR,DTC144TK
89-317-403-080 TR,2SC1740S C846 87-010-263-080 CAP, ELECT 100-10V
87-026-239-080 TR,DTC114TK (0.2W) C851 87-010-186-080 CAP,CHIP 4700P
87-026-237-080 CHIP-TR,DTC124XK C852 87-010-178-080 CHIP CAP 1000P
<170U(S),170K(S),170HA(S)> C853 87-A11-132-080 CAP,TC U 0.01-50 K B
CN201 87-099-018-010 CONN,16P
87-026-464-080 TR,DTC114TS (0.3W)
CN801 87-A60-110-010 CONN,4P V S2M-4W
CNA302 8A-CDA-629-010 CONN ASSY,6P MA-TU
DIODE L801 87-007-342-010 COIL,OSC 85K BIAS
SW801 8Z-CD9-609-010 SW,SL 1-6-2 PS62D01
87-020-465-080 DIODE,1SS133 (110MA)
87-A40-128-080 C-VARI-CAP,HVU202A
87-A40-650-080 ZENER,MTZJ6.8A CD C.B
87-070-345-080 DIODE,IN4148
87-A40-648-080 ZENER,MTZJ8.2A C30 87-010-260-080 CAP, ELECT 47-25V
C251 87-010-404-080 CAP, ELECT 4.7-50V
87-A40-234-080 ZENER,MTZJ5.6A C261 87-010-402-080 CAP, ELECT 2.2-50V
87-017-978-080 DIODE,1N4003 C262 87-010-402-080 CAP, ELECT 2.2-50V
87-017-932-080 ZENER,MTJ6.2B C263 87-010-178-080 CHIP CAP 1000P
87-A40-465-010 DIODE,FR202
C264 87-010-178-080 CHIP CAP 1000P
C265 87-010-263-080 CAP, ELECT 100-10V
MAIN C.B C266 87-010-263-080 CAP, ELECT 100-10V
C267 87-010-112-080 CAP, ELECT 100-16V
C211 87-A11-177-080 C-CAP,S 0.15-16 K B C268 87-010-112-080 CAP, ELECT 100-16V
C212 87-A11-177-080 C-CAP,S 0.15-16 K B
C215 87-016-460-080 C-CAP,S 0.22-16 B C271 87-010-237-080 CAP, ELECT 1000-16V
C216 87-016-460-080 C-CAP,S 0.22-16 B C272 87-010-237-080 CAP, ELECT 1000-16V
C231 87-010-213-080 C-CAP,S 0.015-50 B C278 87-010-405-080 CAP, ELECT 10-50V
C279 87-010-385-080 CAP, ELECT 220-25V
C232 87-010-213-080 C-CAP,S 0.015-50 B C301 87-016-495-000 CAP,E 3300-25 M SMG
C233 87-A10-201-080 C-CAP,S0.33-16 KB
C234 87-A10-201-080 C-CAP,S0.33-16 KB C306 87-010-404-080 CAP, ELECT 4.7-50V
C235 87-016-669-080 C-CAP,S 0.1-25 K B C307 87-010-401-080 CAP, ELECT 1-50V
C236 87-016-669-080 C-CAP,S 0.1-25 K B C308 87-010-221-080 CAP, ELECT 470-10V
C311 87-010-374-080 CAP, ELECT 47-10V
C237 87-010-371-080 CAP, ELECT 470-6.3V C312 87-010-385-080 CAP, ELECT 220-25V
C239 87-010-197-080 CAP, CHIP 0.01 DM
<110HRJ(S),110EZ(S),110EZ(L),170U(S),170K(S),170HA(S)> C321 87-010-197-080 CAP, CHIP 0.01 DM
C239 87-010-805-080 CAP, S 1-16 C322 87-010-263-080 CAP, ELECT 100-10V
C325 87-010-405-080 CAP, ELECT 10-50V
C240 87-010-197-080 CAP, CHIP 0.01 DM C401 87-010-403-080 CAP, ELECT 3.3-50V
<110HRJ(S),110EZ(S),110EZ(L),170U(S),170K(S),170HA(S)> C402 87-010-197-080 CAP, CHIP 0.01 DM
C240 87-010-805-080 CAP, S 1-16
C403 87-010-263-080 CAP, ELECT 100-10V
C404 87-010-248-080 CAP, ELECT 220-10V
C405 87-010-197-080 CAP, CHIP 0.01 DM
4
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
C406 87-010-374-080 CAP, ELECT 47-10V C494 87-010-197-080 CAP, CHIP 0.01 DM
C407 87-010-178-080 CHIP CAP 1000P C501 87-012-368-080 C-CAP,S 0.1-50 F
C408 87-010-198-080 CAP, CHIP 0.022 C502 87-010-322-080 C-CAP,S 100P-50 CH
C409 87-010-248-080 CAP, ELECT 220-10V C503 87-010-322-080 C-CAP,S 100P-50 CH
C410 87-010-263-080 CAP, ELECT 100-10V C504 87-010-322-080 C-CAP,S 100P-50 CH
C411 87-A11-177-080 C-CAP,S 0.15-16 K B C505 87-010-322-080 C-CAP,S 100P-50 CH
C412 87-010-401-080 CAP, ELECT 1-50V C506 87-010-322-080 C-CAP,S 100P-50 CH
C413 87-016-369-080 C-CAP,S 0.033-25 B K C510 87-016-669-080 C-CAP,S 0.1-25 K B
C414 87-010-405-080 CAP, ELECT 10-50V C831 87-010-198-080 CAP, CHIP 0.022
C416 87-010-545-080 CAP, ELECT 0.22-50V CN202 8A-CH4-689-010 CONN,3P V 2.5
C417 87-012-157-080 C-CAP,S 330P-50 CH CN205 87-A60-109-010 CONN,2P V S2M-2W
C418 87-010-213-080 C-CAP,S 0.015-50 B CN301 8A-CH4-689-010 CONN,3P V 2.5
C419 87-A11-608-080 C-CAP,S 0.33-25 K B CN401 87-A60-424-010 CONN,16P V TOC-B
C420 87-016-369-080 C-CAP,S 0.033-25 B K CN403 87-099-201-010 CONN,8P 6216 H
C421 87-A11-177-080 C-CAP,S 0.15-16 K B CN802 8A-CH4-687-010 CONN,4P V 2.5
C422 87-010-184-080 CHIP CAPACITOR 3300P(K) CNA402 8A-CDA-625-010 CONN ASSY,6P CD-ME
C423 87-010-992-080 C-CAP,S 0.047-25 B L401 87-003-102-080 COIL, 10UH
C425 87-010-176-080 C-CAP,S 680P-50 SL L404 87-003-152-080 COIL, 100UH
C426 87-A11-608-080 C-CAP,S 0.33-25 K B !R840 87-029-124-010 RES,FUSE 2.2-1/4
C428 87-010-197-080 CAP, CHIP 0.01 DM SFR430 87-024-437-080 SFR100K,RH063EC
C429 87-010-186-080 CAP,CHIP 4700P X401 8Z-CD5-633-010 VIB, CER16.93MHZ FCR16.93M2
C430 87-012-156-080 C-CAP,S 220P-50 CH
C431 87-010-545-080 CAP, ELECT 0.22-50V
C432 87-010-374-080 CAP, ELECT 47-10V FRONT C.B
C433 87-010-401-080 CAP, ELECT 1-50V
C601 87-010-313-080 CAP, CHIP 18P
C434 87-010-184-080 CHIP CAPACITOR 3300P(K) C602 87-010-315-080 C-CAP,S 27P-50 CH
C435 87-010-197-080 CAP, CHIP 0.01 DM C603 87-010-319-080 C-CAP,S 56P-50 CH
C436 87-010-374-080 CAP, ELECT 47-10V C604 87-010-317-010 CHIP CAP,S 39P CH
C437 87-010-404-080 CAP, ELECT 4.7-50V C605 87-010-264-040 CAP,E 100-10 5L
C438 87-016-669-080 C-CAP,S 0.1-25 K B
C606 87-012-368-080 C-CAP,S 0.1-50 F
C439 87-010-178-080 CHIP CAP 1000P C607 87-015-779-010 CHIP CAPACITOR, 0.01
C440 87-010-145-080 C-CAP,S 1P-50 CH C608 87-010-415-080 CAP ELE SRE 10-50V
C441 87-010-197-080 CAP, CHIP 0.01 DM C609 87-010-493-080 CAP,E 0.47-50 GAS
C442 87-010-313-080 CAP, CHIP 18P C610 87-010-178-080 CHIP CAP 1000P
C445 87-012-368-080 C-CAP,S 0.1-50 F <170U(S),170K(S),170HA(S)>
C446 87-012-368-080 C-CAP,S 0.1-50 F C611 87-A10-189-040 CAP,E 220-10
C447 87-012-368-080 C-CAP,S 0.1-50 F C612 87-010-415-080 CAP ELE SRE 10-50V
C448 87-010-315-080 C-CAP,S 27P-50 CH <170U(S),170K(S),170HA(S)>
C450 87-012-140-080 CAP 470P C613 87-012-368-080 C-CAP,S 0.1-50 F
C451 87-012-156-080 C-CAP,S 220P-50 CH C614 87-010-312-080 C-CAP,S 15P-50 CH
C627 87-015-779-010 CHIP CAPACITOR, 0.01
C455 87-010-247-080 CAP, ELECT 100-50V
C457 87-010-312-080 C-CAP,S 15P-50 CH C628 87-015-779-010 CHIP CAPACITOR, 0.01
C458 87-010-312-080 C-CAP,S 15P-50 CH C629 87-015-779-010 CHIP CAPACITOR, 0.01
C459 87-010-263-080 CAP, ELECT 100-10V C630 87-010-264-040 CAP,E 100-10 5L
C460 87-015-819-080 CAPACITOR,0.01 C631 87-015-779-010 CHIP CAPACITOR, 0.01
CN601 87-099-757-010 CONN,16P 9604S F
C461 87-010-197-080 CAP, CHIP 0.01 DM
C462 87-010-248-080 CAP, ELECT 220-10V CN602 87-A60-079-010 CONN,08P H 9604S-08F
C463 87-010-197-080 CAP, CHIP 0.01 DM CNA604 8A-CDA-623-010 CONN ASSY,7P KEY
C465 87-010-404-080 CAP, ELECT 4.7-50V JW603 87-008-372-080 FILTER, EMI BL OIRNI
C466 87-012-368-080 C-CAP,S 0.1-50 F JW605 87-003-097-080 COIL,1UH
JW606 87-003-097-080 COIL,1UH
C467 87-010-263-080 CAP, ELECT 100-10V
C469 87-012-154-080 C-CAP,S 150P-50 CH JW608 87-003-097-080 COIL,1UH
C470 87-010-544-080 CAP, ELECT 0.1-50V JW627 87-008-372-080 FILTER, EMI BL OIRNI
C471 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z JW633 87-003-098-080 COIL,2.2UH
C472 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z L601 87-003-098-080 COIL,2.2UH
LED602 88-CD6-630-010 LED,934ID RED
C473 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z
C474 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z LED608 88-CD6-630-010 LED,934ID RED
C475 87-010-197-080 CAP, CHIP 0.01 DM LED610 88-CD6-631-010 LED,934GD GRN
C476 87-010-236-080 CAP,E 1000-10 SME <110HRJ(S),110EZ(S),110EZ(L),170U(S),170K(S),170HA(S)>
C477 87-010-197-080 CAP, CHIP 0.01 DM LED611 87-CD8-616-010 LED,SA36-11 HWA-11.0
S601 87-A91-704-080 SW,TACT EVQ 214 05R
C478 87-010-263-080 CAP, ELECT 100-10V S602 87-A91-704-080 SW,TACT EVQ 214 05R
C479 87-010-197-080 CAP, CHIP 0.01 DM
C480 87-010-221-080 CAP, ELECT 470-10V S603 87-A91-704-080 SW,TACT EVQ 214 05R
C481 87-010-405-080 CAP, ELECT 10-50V S604 87-A91-704-080 SW,TACT EVQ 214 05R
C482 87-010-405-080 CAP, ELECT 10-50V S605 87-A91-704-080 SW,TACT EVQ 214 05R
S609 87-A91-704-080 SW,TACT EVQ 214 05R
C489 87-012-368-080 C-CAP,S 0.1-50 F <110HRJ(S),110EZ(S),110EZ(L),170U(S),170K(S),170HA(S)>
C490 87-012-368-080 C-CAP,S 0.1-50 F S611 87-A91-704-080 SW,TACT EVQ 214 05R
C491 87-010-197-080 CAP, CHIP 0.01 DM
C492 87-010-221-080 CAP, ELECT 470-10V X601 87-030-273-010 VIB,XTAL 32.768K5PPM
C493 87-010-180-080 C-CER 1500P<170U(S)> X602 87-030-376-080 VIB,CER CSA5.76MG200
5
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
TUNER C.B L17 87-A50-337-010 COIL,AM OSC (TOKO)
C1 87-010-314-080 C-CAP,S 22P-50V S1 87-A91-548-010 SW,SL-2-3 SK23E01G06
C2 87-010-316-080 C-CAP,S 33P-50 CH <110HRJ(S),100HRJ(S),170U(S),170HA(S)>
C3 87-010-314-080 C-CAP,S 22P-50V S1 87-A91-549-010 SW,SL-6-4 SK64D01G06
C4 87-010-148-080 CAP, CHIP S 4P SL
<110HRJ(S),100HRJ(S),170U(S),170HA(S)> TC5 87-011-253-080 TRIMER,30P LAR
C5 87-010-378-080 CAP, ELECT 10-16V
TC6 87-011-253-080 TRIMER,30P LAR
C7 87-012-156-080 C-CAP,S 220P-50 CH
C8 87-010-197-080 CAP, CHIP 0.01 DM
C9 87-010-311-080 CAP 12P VC1 87-A91-635-010 TUN-CAP,20P-140P E-ACD(MITSUMI
C10 87-010-197-080 CAP, CHIP 0.01 DM
C11 87-010-152-080 C-CAP,S 8P-50 CH VC1 87-A91-167-010 TUN-CAP,20P-160P FA-22125 N000
<170U(S),170HA(S)>
C12 87-010-314-080 C-CAP,S 22P-50V VC1 87-A91-170-010 TUN-CAP,20P-335P FA-2217 N000-
C13 87-010-322-080 C-CAP,S 100P-50 CH <100HE(S)>
C14 87-010-148-080 CAP, CHIP S 4P SL
C15 87-016-669-080 C-CAP,S 0.1-25 K B
C16 87-010-178-080 CHIP CAP 1000P HP C.B
C17 87-016-669-080 C-CAP,S 0.1-25 K B CN204 87-A60-685-010 CONN,4P H WHT EH
C18 87-010-198-080 CAP, CHIP 0.022 CN605 87-A60-117-010 CONN,7P H S2M-7WR
C19 87-016-669-080 C-CAP,S 0.1-25 K B CNA203 8A-CDA-628-010 CONN ASSY,4P MA-HP
C20 87-010-400-080 CAP, ELECT 0.47-50V J251 87-A60-569-010 JACK,HTJ-035-18
C21 87-010-403-080 CAP, ELECT 3.3-50V LED606 88-CD6-630-010 LED,934ID RED
C22 87-010-197-080 CAP, CHIP 0.01 DM LED607 88-CD6-630-010 LED,934ID RED
C24 87-010-197-080 CAP, CHIP 0.01 DM S606 87-A91-704-080 SW,TACT EVQ 214 05R
C25 87-010-197-080 CAP, CHIP 0.01 DM S607 87-A91-704-080 SW,TACT EVQ 214 05R
C26 87-012-358-080 C-CAP,S 0.47-10 F Z S608 87-A91-704-080 SW,TACT EVQ 214 05R
C27 87-012-358-080 C-CAP,S 0.47-10 F Z S614 87-A91-704-080 SW,TACT EVQ 214 05R
C28 87-010-992-080 C-CAP,S 0.047-25 B S615 87-A91-704-080 SW,TACT EVQ 214 05R
C29 87-010-992-080 C-CAP,S 0.047-25 B
C30 87-010-248-080 CAP, ELECT 220-10V
C31 87-010-379-080 CAP, ELECT 22-16V BATT1 C.B
C32 87-010-197-080 CAP, CHIP 0.01 DM
C901 87-010-192-080 C-CAP,S 0.022-50 F
C33 87-010-197-080 CAP, CHIP 0.01 DM C902 87-010-192-080 C-CAP,S 0.022-50 F
C34 87-010-197-080 CAP, CHIP 0.01 DM C903 87-010-192-080 C-CAP,S 0.022-50 F
C35 87-010-197-080 CAP, CHIP 0.01 DM C904 87-010-192-080 C-CAP,S 0.022-50 F
C36 87-010-263-080 CAP, ELECT 100-10V CNA901 8A-CDA-627-010 CONN ASSY,3P PWR
C37 87-010-197-080 CAP, CHIP 0.01 DM
!PR901 87-A90-092-080 PROTECTOR,2.5A 491
C38 87-010-197-080 CAP, CHIP 0.01 DM SP901 87-CD6-213-010 SPR-C,BATT (-)
C39 87-010-197-080 CAP, CHIP 0.01 DM SP902 87-CD6-213-010 SPR-C,BATT (-)
<110HRJ(S),100HRJ(S),170U(S),170HA(S)>
C40 87-010-150-080 C-CAP,S 6P-50 CH
BATT2 C.B
C41 87-010-321-080 CHIP CAPACITOR,82P(J)
SP903 87-CD6-213-010 SPR-C,BATT (-)
C42 87-010-150-080 C-CAP,S 6P-50 CH SP904 87-CD6-213-010 SPR-C,BATT (-)
C44 87-012-140-080 CAP 470P MOTOR C.B
C51 87-010-197-080 CAP, CHIP 0.01 DM M2 9X-262-576-910 MOTOR GEAR ASSY
C56 87-010-152-080 C-CAP,S 8P-50 CH PIN3 91-564-722-110 CONNECTOR 6P
<110HRJ(S),100HRJ(S),170U(S),170HA(S)> SW1 91-572-085-120 LEAF SW
CF1 87-A90-128-010 FLTR,AM IF CFAL-455
CF2 87-008-261-010 FILTER, SFE10.7MA5-A
VOL SEL C.B<170HA(S)>
CF3 87-008-261-010 FILTER, SFE10.7MA5-A
CN2 87-A60-116-010 CONN,6P H S2M-6WR !F901 87-035-347-010 FUSE, 2.5A 250V T<170HA(S)>
L2 87-A50-560-010 COIL,FM BPF(ACD) FC901 87-033-213-010 CLAMP, FUSE SMK<170HA(S)>
L3 8A-CD9-660-010 BAR-ANT,MW 2B-ACD(COI) FC902 87-033-213-010 CLAMP, FUSE SMK<170HA(S)>
<110HRJ(S),100HRJ(S),170U(S),170HA(S)>
L3 8A-CD9-661-010 BAR-ANT,MW/LW 3B-ACD(COI)
L4 87-A50-562-010 COIL,FM RF EX(ACD)
L5 87-A50-564-010 COIL,FM OSC EX(ACD)
L6 87-A50-337-010 COIL,AM OSC (TOKO)
<110HRJ(S),100HRJ(S),170U(S),170HA(S)>
L7 87-A50-579-010 COIL,AM IFT(ACD)
L8 87-A50-335-010 COIL,FM IFT (TOKO)
L9 87-A50-577-010 COIL,FM DET(ACD)
L10 87-005-849-080 COIL,10UH(CECS)
L16 87-A50-569-010 COIL,LW OSC-ACD(COI)
6
IC, LA6541D IC, M61509FP
mono. SW
· Regarding connectors, they are not stocked as they are not the initial order items.
The connectors are available after they are supplied from connector manufacturers upon the order is received.
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
Dimensions (mm) :A
Wattage Type Tolerance Symbol Form L W t Resistor Code : A
1/16W 1005 5% CJ 1.0 0.5 0.35 104
L
1/16W 1608 5% CJ t 1.6 0.8 0.45 108
Control logic
1/10W 2125 5% CJ W 2 1.25 0.45 118
1/8W 3216 5% CJ 3.2 1.6 0.55 128
IC BLOCK DIAGRAM
IC, M62495AFP IC, LA1828 IC, BA4560N
AUTO RESET
7 8
WIRING-1 (MAIN/CD)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
B
C
D
E
F
G
A99, A100
H
A99, A100
I
J
K
9 10
SCHEMATIC DIAGRAM-1 (MAIN)
R819, R820
A110 : 1K
A100 : 820
OTHER MODELS : 8.2K
C483 220P
A99, A100 A110, A107
C239, C240 0.1 1
IC203 M62495AFP M61509FP
R203, R204 6.8K JW
R205, R206 1.2K NO MOUNT
C484
220P
A170 MODEDL
D810 D809
1SS133 1SS133
MTJ6.2B
OTHER MODELS J90
MTZJ6.8A
100 1N4148
100
DRY BATTERY
R14X8
DC 12V
11 12
SCHEMATIC DIAGRAM-2 (CD)
13 14
WIRING-2 (MOTOR) TRANSISTOR ILLUSTRATION
1 2 3 4 5 6 7
A
ECB ECB ECB
B 2SA1296 2SA933 2SA1318
H MOTOR C.B 2SC1815 2SC1740
DTC114TS
M2 DTC124XS
C
+ M2 C
(SLED MOTOR)
B
D E B CE
_ SW1 2SC2714 2SB1370
(INSIDE LIMIT SW)
TO B CD C.B CNA402
DTC114TK
DTC114YK
M3 DTC124XK
E
DTC144TK
(SPINDLE MOTOR)
SW1
PIN3
F
_ +
G
M3
H
I
J
K
15 16
WIRING-3 (FRONT/HP/BATT1/BATT2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
A170 MODEL
B
C
D
E
OTHER MODELS
F
G
A110, A170 MODELS
A110, A170
MODELS A110, A170
A110, A170 MODELS
MODELS
H
JW604
I
J
K
17 18
SCHEMATIC DIAGRAM-3 (FRONT)
CONN, 8P H 9604S-08F
CN602
JW604
4.7k
A110, A170 MODELS
A110, A170 MODELS
A110, A170 MODELS
19 20
SCHEMATIC DIAGRAM-4 (TUMER: HA, HE, HR, U) SCHEMATIC DIAGRAM-5 (TUMER: K, EZ)
FM BALANCE ADJ.
R022 100k
HVU202A
D013
C039 0.01
FM FREQ. RANGE
L005, TC001
SH001
ADJ.
21 22
WIRING-4 (TUNER:HA, HE, HR, U) WIRING-5 (TUNER: K, EZ)
1 2 3 4 5 6 7 1 2 3 4 5 6 7
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
23 24
ELECTRICAL ADJUSTMENT
L003 L003 < TUNER SECTION > 7. FM Tracking Adjustment
(BAR ANT) 2 3 (BAR ANT) L004 ..................................................................... 88.0MHz
1 2 1 (HA, HE, HR, U MODELS) TC002 ................................................................. 108.0MHz
D TUNER C.B D TUNER C.B 1. AM Freq. Range Adjustment
4 TC006
L006 ....................................................................... 517kHz
TC003 ................................................................... 1750kHz
8. FM IF Adjustment
Settings: · Test point: IC001 (LA1828) 19PIN
· Adjustment location: L008
2 PVC001 L006 3 PVC001 2. AM Tracking Adjustment Method: Adjust L008 so that the output level at 98.0MHz
TC4 TC3 TC4 TC3 L016 L017 L003 ....................................................................... 600kHz becomes balanced.
L005 TC004 ................................................................... 1400kHz
TC005
L005 9. FM Balance Adjustment
L004 L004 TC1 3. AM IF Adjustment Settings: · Test point: IC001 (LA1828) 19PIN
TC2 TC119 L009 TC2
5 7 19 Settings: · Test point: IC001 (LA1828) 19PIN
· Adjustment location: L007
· Adjustment location: L009
L009 Method: Adjust L009 so that the output level at 98.0MHz
IC001 IC001 Method: Adjust L007 so that the output level at 1400kHz becomes balanced.
becomes maximum.
L007 L007
4. FM Freq. Range Adjustment < DECK SECTION >
L008 L008 L005 ..................................................................... 87.0MHz 10. Tape Speed Adjustment
TC001 ................................................................. 109.0MHz Settings : · Test tape : TTA100
(HA, HE, HR, U MODELS) (K, EZ MODELS) · Test point : J251 (PHONES jack)
6 3 7 4 8 5 9 6 5. FM Tracking Adjustment · Adjustment location : SFR of deck motor
L004 ..................................................................... 88.0MHz Method : Play back the test tape and adjust SFR so that
TC002 ................................................................. 108.0MHz the frequency counter reads 3000Hz ± 30Hz.
B CD C.B
6. FM IF Adjustment 11. Head Azimuth Adjustment
Settings: · Test point: IC001 (LA1828) 19PIN Settings : · Test tape : TTA320
· Adjustment location: L008 · Test point : J251 (PHONES jack)
Method: Adjust L008 so that the output level at 98.0MHz · Adjustment location : Azimuth adjustment
becomes balanced. screw
IC404 Method : Play back the 8kHz signal of the test tape and
7. FM Balance Adjustment adjust screw so that the output becomes
SFR430 Settings: · Test point: IC001 (LA1828) 19PIN maximum.
# · Adjustment location: L009
Method: Adjust L009 so that the output level at 98.0MHz 12. Bias frequncy Adjustment
CN401 becomes balanced. L801..................................................................85kHz±0.5kHz
(K, EZ MODELS) < CD SECTION >
1. LW Freq. Range Adjustment 13. FE Balance Adjustment
L016 ....................................................................... 145kHz
Settings : · Test point : IC401 PIN58 (VR), IC401 PIN 20
TC005 ..................................................................... 295kHz
(FE)
A MAIN C.B IC801
1 2. MW Freq. Range Adjustment
· Adjustment location : SFR430
CN801 Method : Playback the disc and adjust SFR430 so that the
L017 ....................................................................... 515kHz test point voltage becomes 0V.
CN201 TC003 ................................................................... 1635kHz
L801
3. MW Tracking Adjustment
L003 ....................................................................... 600kHz
TC004 ................................................................... 1400kHz
@
E H.P. C.B 4. LW Tracking Adjustment
TC006 ..................................................................... 288kHz
M1 (TAPE MOTOR)
RPH
5. AM IF Adjustment
Settings: · Test point: IC001 (LA1828) 19PIN
J251 PHONES · Adjustment location: L007
Method: Adjust L007 so that the output level at 1400kHz
0! becomes maximum.
0 ! 6. FM Freq. Range Adjustment
L005 ..................................................................... 87.4MHz
TC001 ................................................................. 108.3MHz
25 26
IC DESCRIPTION
IC, LA9241ML
Pin No. Pin Name I/O Description Pin No. Pin Name I/O Description
Pin to which external pickup photo diode is connected. RF signal is created by adding 36 TES O Pin from which TES signal is output to DSP.
1 FIN2 I
with the FIN1 pin signal. FE signal is created by subtracting from the FIN1 pin signal. "High Frequency Level" is used to judge whether the main beam position is on top of
37 HFL O
2 FIN1 I Pin to which external pickup photo diode is connected. bit or on top of mirror.
Pin to which external pickup photo diode is connected. TE signal is created by 38 SLOF I Sled servo off control input pin.
3 E I
subtracting from the F pin signal. 39, 40 CV, CV+ I CLV error signal input pin from DSP.
4 F I Pin to which external pickup photo diode is connected. 41 RFSM O RF output pin.
5 TB I DC component of the TE signal is input. RF gain setting and EFM signal 3T compensation constant setting pin together with
42 RFS- I
Pin to which external resistor setting the TE signal gain is connected between the TE RFSM pin.
6 TE- I
pin. "Slice Level Control" is the output pin which controls the RF signal data slice level by
43 SLC O
7 TE O TE signal output pin. DSP.
TES "Track Error Sense" comparator input pin. TE signal is passed through a band- 44 SLI I Input pin which control the data slice level by the DSP.
8 TESI I
pass filter then input. 45 DGND -- Digital system GND.
9 SCI I Shock detection signal input pin. 46 FSC O Output pin to which external focus search smoothing capacitor is connected.
10 TH I Tracking gain time constant setting pin. 47 TBC I "Tracking Balance Control" EF balance variable range setting pin.
11 TA O TA amplifier output pin. 48 NC -- No connection.
Pin to which external tracking phase compensation constants are connected between 49 DEF O Disc defect detector output pin.
12 TD- I
the TD and VR pins. 50 CLK I Reference clock input pin. 4.23 MHz of the DSP is input.
13 TD I Tracking phase compensation setting pin. 51 CL I Microprocessor command clock input pin.
14 JP I Tracking jump signal (kick pulse) amplitude setting pin. 52 DAT I Microprocessor command data input pin.
15 TO O Tracking control signal output pin. 53 CE I Microprocessor command chip enable input pin.
16 FD O Focusing control signal output pin. 54 DRF O "Detect RF" RF level detector output.
Pin to which external focusing phase compensation constants are connected between 55 FSS I "Focus Search Select" focus search mode (± search/+ search) select pin.
17 FD- I
the FD and FA pins. 56 VCC2 -- Servo system and digital system Vcc pin.
Pin to which external focusing phase compensation constants are connected between 57 REFI -- Pin to which external bypass capacitor for reference voltage is connected.
18 FA I
the FD and FA pins. 58 VR O Reference voltage output pin.
Pin to which external focusing phase compensation constants are connected between 59 LF2 I Disc defect detector time constant setting pin.
19 FA- I
the FA and FE pins. 60 PH1 I Pin to which external capacitor for RF signal peak holding is connected.
20 FE O FE signal output pin. 61 BH1 I Pin to which external capacitor for RF signal bottom holding is connected.
21 FE- I Pin to which external FE signal gain setting resistor is connected between the FE pin. 62 LDD O APC circuit output pin.
22 AGND -- Analog signal GND. 63 LDS I APC circuit input pin.
23 SP O Signal ended output of the CV+and CV- pin input signal. 64 VCC1 -- RF system Vcc pin.
24 SPI I Spndle amp input.
25 SPG I Pin to which external spindle gain setting resistor in 12 cm mode is connected.
Pin to which external spindle phase compensation constants are connected together
26 SP- I
with SPD pin.
27 SPD O Spindle control signal output pin.
28 SLEQ I Pin to which external sled phase compensation constants are connected.
29 SLD O Sled control signal output pin.
30, 31 SL-, SL+ I Sled advance signal input pin from microprocessor.
32, 33 JP-, JP+ I Tracking jump signal input pin from DSP.
34 TGL I Tracking gain control signal input from DSP. Low gain when TGL = H.
35 TOFF I Tracking off control signal input pin from DSP. Off when TOFF = H.
27 28
IC, LC78622ED
Pin No. Pin Name I/O Description Pin No. Pin Name I/O Description
1 DEFI I Defect sense signal (DEF) input pin. (Connect to 0V when not used). 43 XVDD -- Crystal oscillator power supply pin.
2 TAI I Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V. 44 XOUT O
Pin to which external 16.9344 MHz crystal oscillator is connected.
3 PDO O Phase comparator output pin to control external VCO. 45 XIN I
4 VVSS -- GND pin for built-in VCO. Be sure to connect to 0V. 46 XVSS -- Crystal oscillator GND pin. Be sure to connect to 0V.
For PLL.
5 ISET I Pin to which external resistor adjusting the PD0 output current. 47 SBSY O Subcode block sync signal output pin.
6 VVDD -- Power supply pin for built-in VCO.