Text preview for : hfe_aiwa_csd-a310_service_revision_en.pdf part of Aiwa CSD-A310 COMPACT DISC STEREO
RADIO CASSETTE RECORDER Service manual
BASIC TAPE MECHANISM : TN-21ZVC-2000
BASIC CD MECHANISM : DA11T3C
Back to : hfe_aiwa_csd-a310_service | Home
CSD-A310 LH, HA, K
SERVICE MANUAL
COMPACT DISC STEREO BASIC TAPE MECHANISM : TN-21ZVC-2000
RADIO CASSETTE RECORDER BASIC CD MECHANISM : DA11T3C
· This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
CSD-A310 (LH, HA), (S/M Code No. 09-003-428-2T1) and CSD-A310 (K),
(S/M Code No. 09-003-428-2T2).
N
SIO
VI
RE
TA
DA
S/M Code No. 09-005-428-2R1
SPECIFICATIONS
Frequency range FM: 87.5 MHz to 108.0 MHz Speaker 80 mm cone type (2)
Antenna: Rod antenna Outputs Headphones jack: stereo mini-jack
AM (MW): Power output 2.5 W + 2.5 W
530 kHz to 1,750 kHz (EIAJ 7 ohms, T.H.D. 10 %)
530 kHz to 1,605 kHz 1.9 W + 1.9 W
Antenna: Ferrite bar antenna (DIN 1% Rated Power)
LW: Power requirements DC 12 V using eight size C (R14)
150 kHz to 285 kHz batteries
Antenna: Ferrite bar antenna AC 110 - 120 V/220 - 240 V
switchable, 50/60 Hz
AC 230 V, 50 Hz
Track format 4 tracks, 2 channels Power consumption 16 W
Frequency range Normal tape: 50 - 12,500 Hz (EIAJ) Dimensions 310 x 171 x 260 mm
Recording system AC bias (W x H x D)
Erasing system Magnet erase Weight 2.8 kg (excluding batteries)
Heads Recording/playback head (1)
Erasure head (1)
Disc Compact disc
Scanning method Non-contact optical scanner
(semiconductor laser)
· Design and specifications are subject to change without
notice.
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully CAUTION
the instructions below when servicing. Use of controls or adjustments or performance of proce-
dures other than those specified herin may result in
WARNING!! hazardous radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS ATTENTION
NECESSARY TO CONFIRM LASER BEAM EMISSION. L'utillisation de commandes, réglages ou procédures
BE SURE TO OBSERVE FROM A DISTANCE OF MORE autres que ceux spécifiés peut entraîner une dangereuse
THAN 30cm FROM THE SURFACE OF THE OBJEC- exposition aux radiations.
TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
ADVARSEL
s Caution: Invisible laser radiation when Usynlig laserståling ved åbning, når sikkerhedsafbrydereer
open and interlocks defeated avoid ude af funktion. Undgå udsættelse for stråling.
exposure to beam.
s Advarsel: Usynlig laserståling ved åbning, This Compact Disc player is classified as a CLASS 1
når sikkerhedsafbrydere er ude af funktion.
LASER product.
Undgå udsættelse for stråling.
The CLASS 1 LASER PRODUCT label is located on the
rear exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa
mainitulla tavalla saataa altistaa käyt-täjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle. CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
VARNING! LUOKAN 1 LASER LAITE
Om apparaten används på annat sätt än vad som KLASS 1 LASER APPARAT
specificeras i denna bruksanvising, kan användaren
utsättas för osynling laserstrålning, som överskrider
gränsen för laserklass 1.
Precaution to replace Optical block
PICK-UP Assy P.C.B
(SF-P101NR)
Body or clothes electrostatic potential could
ruin laser diode in the optical block. Be sure
ground body and workbench, and use care the
clothes do not touch the diode.
1) After the connection, remove solder shown in
right figure.
Solder
3
ELECTRICAL MAIN PARTS LIST
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
IC C278 87-010-405-080 CAP, ELECT 10-50V
C279 87-010-385-080 CAP, ELECT 220-25V
87-A20-955-010 IC,LA1828 C301 87-016-658-000 CAP,E 4700-35 M SMG
87-A21-064-010 IC,LA4227 C306 87-010-404-080 CAP, ELECT 4.7-50V
87-A21-520-040 C-IC,M61509FP C307 87-010-401-080 CAP, ELECT 1-50V
87-A20-446-010 C-IC,LA9241ML
87-A20-459-010 C-IC,LC78622ED C308 87-010-221-080 CAP, ELECT 470-10V
C309 87-010-197-080 CAP, CHIP 0.01 DM
87-A21-093-010 IC,LA6541D C310 87-010-248-080 CAP, ELECT 220-10V
8A-CD9-610-010 C-IC,LC865516A-5P16 C311 87-010-374-080 CAP, ELECT 47-10V
87-A21-431-010 IC,BA4560N C312 87-010-385-080 CAP, ELECT 220-25V
C316 87-010-384-080 CAP, ELECT 100-25V
TRANSISTOR C321 87-010-197-080 CAP, CHIP 0.01 DM
C322 87-010-263-080 CAP, ELECT 100-10V
89-327-143-080 TR,2SC2714 (0.1W) C325 87-010-405-080 CAP, ELECT 10-50V
87-026-447-080 TR,2SC1740S R C401 87-010-403-080 CAP, ELECT 3.3-50V
87-026-463-080 TR,2SA933S (0.3W)
87-026-213-080 CHIP-TR,DTC114YK C402 87-010-197-080 CAP, CHIP 0.01 DM
89-320-011-080 TR,2SC2001 (15W) C403 87-010-263-080 CAP, ELECT 100-10V
C404 87-010-248-080 CAP, ELECT 220-10V
89-112-965-080 TR,2SA1296 (0.75W) C405 87-010-197-080 CAP, CHIP 0.01 DM
87-026-291-080 TR,DTC124XS C406 87-010-374-080 CAP, ELECT 47-10V
87-A30-226-010 TR,2SB1655E
87-026-462-080 TR,2SC1740 S(RS 0.3W) C407 87-010-178-080 CHIP CAP 1000P
89-318-154-080 TR,2SC1815 (0.4W) C408 87-010-198-080 CAP, CHIP 0.022
C409 87-010-248-080 CAP, ELECT 220-10V
89-109-332-380 TR,2SA933RS C410 87-010-263-080 CAP, ELECT 100-10V
89-113-187-080 TR,2SA1318TU C411 87-A11-177-080 C-CAP,S 0.15-16 K B
87-026-239-080 TR,DTC114TK (0.2W)
87-026-297-080 TR,DTA144TK C412 87-010-401-080 CAP, ELECT 1-50V
89-317-403-080 TR,2SC1740S C413 87-016-369-080 C-CAP,S 0.033-25 B K
C414 87-010-405-080 CAP, ELECT 10-50V
87-026-464-010 TR,DTC114TS C416 87-010-545-080 CAP, ELECT 0.22-50V
87-026-464-080 TR,DTC114TS (0.3W) C417 87-012-157-080 C-CAP,S 330P-50 CH
C418 87-010-213-080 C-CAP,S 0.015-50 B
DIODE C419 87-A11-608-080 C-CAP,S 0.33-25 K B
C420 87-016-369-080 C-CAP,S 0.033-25 B K
87-020-465-080 DIODE,1SS133 (110MA) C421 87-A11-177-080 C-CAP,S 0.15-16 K B
87-027-607-080 ZENER,HZ7B3L C422 87-010-183-080 C-CAP,S 2700P-50 B
87-A40-466-080 ZENER,MTZJ2.7A
87-070-345-080 DIODE,IN4148 C423 87-010-956-080 CHIP-CAP,S 0.068-25B
87-A40-648-080 ZENER,MTZJ8.2A C424 87-010-993-080 C-CAP,S 0.056-25 B
C425 87-010-176-080 C-CAP,S 680P-50 SL
87-A40-234-080 ZENER,MTZJ5.6A C426 87-A11-608-080 C-CAP,S 0.33-25 K B
87-017-978-080 DIODE,1N4003 C428 87-010-197-080 CAP, CHIP 0.01 DM
87-017-932-080 ZENER,MTZJ6.2B
87-A40-465-010 DIODE,FR202 C429 87-010-186-080 CAP,CHIP 4700P
C430 87-012-156-080 C-CAP,S 220P-50 CH
C431 87-010-545-080 CAP, ELECT 0.22-50V
MAIN C.B C432 87-010-374-080 CAP, ELECT 47-10V
C433 87-010-401-080 CAP, ELECT 1-50V
C30 87-010-260-080 CAP, ELECT 47-25V
C211 87-010-805-080 CAP, S 1-16 C434 87-010-184-080 CHIP CAPACITOR 3300P(K)
C212 87-010-805-080 CAP, S 1-16 C435 87-010-197-080 CAP, CHIP 0.01 DM
C215 87-016-460-080 C-CAP,S 0.22-16 B C436 87-010-374-080 CAP, ELECT 47-10V
C216 87-016-460-080 C-CAP,S 0.22-16 B C437 87-010-404-080 CAP, ELECT 4.7-50V
C438 87-016-669-080 C-CAP,S 0.1-25 K B
C231 87-010-213-080 C-CAP,S 0.015-50 B
C232 87-010-213-080 C-CAP,S 0.015-50 B C439 87-010-178-080 CHIP CAP 1000P
C233 87-A10-201-080 C-CAP,S0.33-16 KB C440 87-010-145-080 C-CAP,S 1P-50 CH
C234 87-A10-201-080 C-CAP,S0.33-16 KB C441 87-010-197-080 CAP, CHIP 0.01 DM
C235 87-016-669-080 C-CAP,S 0.1-25 K B C442 87-010-312-080 C-CAP,S 15P-50 CH
C445 87-012-368-080 C-CAP,S 0.1-50 F
C236 87-016-669-080 C-CAP,S 0.1-25 K B
C237 87-010-408-080 CAP, ELECT 47-50V C446 87-012-368-080 C-CAP,S 0.1-50 F
C239 87-010-197-080 CAP, CHIP 0.01 DM C447 87-012-368-080 C-CAP,S 0.1-50 F
C240 87-010-197-080 CAP, CHIP 0.01 DM C448 87-010-315-080 C-CAP,S 27P-50 CH
C247 87-010-401-080 CAP, ELECT 1-50V C450 87-012-140-080 CAP 470P
C451 87-012-156-080 C-CAP,S 220P-50 CH
C248 87-010-401-080 CAP, ELECT 1-50V
C251 87-010-401-080 CAP, ELECT 1-50V C455 87-010-247-080 CAP, ELECT 100-50V
C263 87-010-178-080 CHIP CAP 1000P C457 87-010-312-080 C-CAP,S 15P-50 CH
C264 87-010-178-080 CHIP CAP 1000P C458 87-010-312-080 C-CAP,S 15P-50 CH
C265 87-010-263-080 CAP, ELECT 100-10V C459 87-010-263-080 CAP, ELECT 100-10V
C460 87-015-819-080 CAPACITOR,0.01
C266 87-010-263-080 CAP, ELECT 100-10V
C267 87-010-112-080 CAP, ELECT 100-16V C461 87-010-197-080 CAP, CHIP 0.01 DM
C268 87-010-112-080 CAP, ELECT 100-16V C462 87-010-248-080 CAP, ELECT 220-10V
C271 87-010-235-080 CAP,E 470-16 SME C463 87-010-190-080 S CHIP F 0.01
C272 87-010-235-080 CAP,E 470-16 SME C465 87-010-404-080 CAP, ELECT 4.7-50V
C466 87-012-368-080 C-CAP,S 0.1-50 F
4
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
C467 87-010-263-080 CAP, ELECT 100-10V CNA801 8A-CDB-626-010 CONN ASSY,4P CASS HEAD
C469 87-012-154-080 C-CAP,S 150P-50 CH CNA802 8A-CDB-625-010 CONN ASSY,4P CASS MECHA
C470 87-010-544-080 CAP, ELECT 0.1-50V FC401 8A-CDB-623-010 FF-CABLE, 16P 1.0 CD-RF
C471 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z L401 87-003-102-080 COIL, 10UH
C472 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z L404 87-003-152-080 COIL, 100UH
C473 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z L801 87-007-342-010 COIL,OSC 85K BIAS
C474 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z R840 87-029-124-010 RES,FUSE 2.2-1/4
C475 87-010-197-080 CAP, CHIP 0.01 DM SFR430 87-024-437-080 SFR100K,RH063EC
C476 87-010-236-080 CAP,E 1000-10 SME SW801 88-CT6-619-010 BACK SLIDE SW 6P2T SHORTIN
C477 87-010-197-080 CAP, CHIP 0.01 DM X401 8Z-CD5-633-010 VIB, CER16.93MHZ FCR16.93M2
C478 87-010-263-080 CAP, ELECT 100-10V
C479 87-010-197-080 CAP, CHIP 0.01 DM TUNER C.B
C480 87-010-221-080 CAP, ELECT 470-10V
C481 87-010-405-080 CAP, ELECT 10-50V C1 87-010-314-080 C-CAP,S 22P-50V
C482 87-010-405-080 CAP, ELECT 10-50V C2 87-010-316-080 C-CAP,S 33P-50 CH
C3 87-010-314-080 C-CAP,S 22P-50V
C489 87-012-368-080 C-CAP,S 0.1-50 F C4 87-010-148-080 CAP, CHIP S 75P SL
C490 87-012-368-080 C-CAP,S 0.1-50 F C5 87-010-378-080 CAP, ELECT 10-16V
C491 87-010-197-080 CAP, CHIP 0.01 DM
C492 87-010-221-080 CAP, ELECT 470-10V C7 87-012-156-080 C-CAP,S 220P-50 CH
C494 87-010-190-080 S CHIP F 0.01 C8 87-010-197-080 CAP, CHIP 0.01 DM
C9 87-010-311-080 CAP 12P
C501 87-012-368-080 C-CAP,S 0.1-50 F C10 87-010-197-080 CAP, CHIP 0.01 DM
C502 87-010-322-080 C-CAP,S 100P-50 CH C11 87-010-152-080 C-CAP,S 8P-50 CH
C503 87-010-322-080 C-CAP,S 100P-50 CH
C504 87-010-322-080 C-CAP,S 100P-50 CH C12 87-010-314-080 C-CAP,S 22P-50V
C505 87-010-322-080 C-CAP,S 100P-50 CH C13 87-010-322-080 C-CAP,S 100P-50 CH
C14 87-010-148-080 CAP, CHIP S 75P SL
C506 87-010-322-080 C-CAP,S 100P-50 CH C15 87-016-669-080 C-CAP,S 0.1-25 K B
C510 87-016-669-080 C-CAP,S 0.1-25 K B C16 87-010-178-080 CHIP CAP 1000P
C801 87-010-248-080 CAP, ELECT 220-10V
C805 87-012-365-080 C-CAP,S 0.027-25VBK C17 87-016-669-080 C-CAP,S 0.1-25 K B
C806 87-012-365-080 C-CAP,S 0.027-25VBK C18 87-010-198-080 CAP, CHIP 0.022
C19 87-016-669-080 C-CAP,S 0.1-25 K B
C807 87-010-405-080 CAP, ELECT 10-50V C20 87-010-400-080 CAP, ELECT 0.47-50V
C808 87-010-405-080 CAP, ELECT 10-50V C21 87-010-403-080 CAP, ELECT 3.3-50V
C809 87-010-405-080 CAP, ELECT 10-50V
C810 87-010-405-080 CAP, ELECT 10-50V C22 87-010-197-080 CAP, CHIP 0.01 DM
C811 87-010-178-080 CHIP CAP 1000P C24 87-010-188-080 CAP,CHIP 6800P
C25 87-010-188-080 CAP,CHIP 6800P
C812 87-010-178-080 CHIP CAP 1000P C26 87-016-669-080 C-CAP,S 0.1-25 K B
C816 87-010-180-080 C-CER 1500P C27 87-016-669-080 C-CAP,S 0.1-25 K B
C817 87-010-180-080 C-CER 1500P
C819 87-010-426-080 C-CAP,S 0.012-25 B C28 87-010-992-080 C-CAP,S 0.047-25 B
C820 87-010-426-080 C-CAP,S 0.012-25 B C29 87-010-992-080 C-CAP,S 0.047-25 B
C30 87-010-248-080 CAP, ELECT 220-10V
C821 87-010-401-080 CAP, ELECT 1-50V C31 87-010-379-080 CAP, ELECT 22-16V
C822 87-010-401-080 CAP, ELECT 1-50V C32 87-010-197-080 CAP, CHIP 0.01 DM
C823 87-010-181-080 CAP,CHIP S 1800P
C824 87-010-181-080 CAP,CHIP S 1800P C33 87-010-197-080 CAP, CHIP 0.01 DM
C829 87-010-178-080 CHIP CAP 1000P C34 87-010-197-080 CAP, CHIP 0.01 DM
C35 87-010-197-080 CAP, CHIP 0.01 DM
C830 87-010-178-080 CHIP CAP 1000P C36 87-010-263-080 CAP, ELECT 100-10V
C831 87-010-198-080 CAP, CHIP 0.022 C37 87-010-197-080 CAP, CHIP 0.01 DM
C833 87-018-195-080 CAP, CER 1200P-16V
C834 87-010-248-080 CAP, ELECT 220-10V C38 87-010-197-080 CAP, CHIP 0.01 DM
C835 87-010-322-080 C-CAP,S 100P-50 CH C41 87-010-318-080 C-CAP,S 47P-50 CH
C44 87-010-302-080 C-CAP,S 270P-50 CH
C836 87-010-322-080 C-CAP,S 100P-50 CH C51 87-010-197-080 CAP, CHIP 0.01 DM
C843 87-010-197-080 CAP, CHIP 0.01 DM C56 87-010-152-080 C-CAP,S 8P-50 CH
C844 87-018-124-080 CAP, CER 270P-50V
C845 87-010-178-080 CHIP CAP 1000P CF1 87-A90-128-010 FLTR,AM IF CFAL-455
C846 87-010-263-080 CAP, ELECT 100-10V CF2 82-785-747-010 CF MS2 GHY R
CF3 82-785-747-010 CF MS2 GHY R
C851 87-010-186-080 CAP,CHIP 4700P CN2 87-099-194-010 CONN,6P 6216V
C852 87-010-178-080 CHIP CAP 1000P D3 87-A40-128-080 C-VARI-CAP,HVU202A
C853 87-018-211-080 CAP,TC U 0.01-50 Z F
C853 87-A11-145-080 CAP,TC U 0.01-50 Z F L2 87-A50-560-010 COIL,FM BPF(ACD)
CN201 87-099-018-010 CONN,16P L3 8A-CD9-660-010 BAR-ANT,MW 2B-ACD(COI)
L3 8A-CD9-661-010 BAR-ANT,MW/LW 3B-ACD(COI)
CN202 87-A60-685-010 CONN,4P H WHT EH L4 87-A50-562-010 COIL,FM RF EX(ACD)
CN205 87-A60-109-010 CONN,2P V S2M-2W L5 87-A50-564-010 COIL,FM OSC EX(ACD)
CN301 87-099-416-010 CONN,3P EH H WHT
CN401 87-A60-424-010 CONN,16P V TOC-B L6 87-A50-337-010 COIL,AM OSC (TOKO)
CN403 87-099-201-010 CONN,8P 6216 H L7 87-A50-336-010 COIL,AM IFT (TOKO)
L8 87-A50-335-010 COIL,FM IFT (TOKO)
CN801 87-A60-110-010 CONN,4P V S2M-4W L9 87-A50-334-010 COIL,FM DET (TOKO)
CN802 87-049-469-010 CONN,4P V L10 87-005-849-080 COIL,10UH(CECS)
CNA205 8A-CD9-626-010 CONN ASSY,2P DOOR
CNA302 8A-CDB-627-010 CONN ASSY,6P MA-TUNER L16 87-A50-569-010 COIL,LW OSC-ACD(COI)
CNA402 8A-CDB-622-010 CONN ASSY,6P CD-MOTOR L17 87-A50-337-010 COIL,AM OSC (TOKO)
5
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
S1 87-A91-549-010 SW,SL-6-4 SK64D01G06 VOL C.B
SW1 87-A91-548-010 SW,SL-2-3 SK23E01G06
TC5 87-011-221-080 TRIMMER,CER 30P 6.15X5.9 VC CN607 84-722-632-010 CONN,2P H
TC6 87-011-221-080 TRIMMER,CER 30P 6.15X5.9 VC S614 8Z-CT6-636-010 SW,TACT EVQJAC04M
VC1 87-A91-635-010 TUN-CAP,20P-140P E-ACD(MITSUMI S615 8Z-CT6-636-010 SW,TACT EVQJAC04M
FRONT C.B PHONE C.B
C601 87-010-313-080 CAP, CHIP 18P CN204 87-049-469-010 CONN,4P V
C602 87-010-315-080 C-CAP,S 27P-50 CH CNA203 8A-CDB-624-010 CONN ASSY,3P H.P
C603 87-010-319-080 C-CAP,S 56P-50 CH CNA204 8A-CDB-633-010 CONN ASSY,4P SPKR
C604 87-010-317-010 CHIP CAP,S 39P CH J251 87-009-216-010 JACK, DIA 3.5
C605 87-010-263-080 CAP, ELECT 100-10V
C606 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z BATT A C.B
C607 87-015-819-080 CAPACITOR,0.01
C608 87-010-405-080 CAP, ELECT 10-50V C901 87-018-205-080 CAP, CERA-SOL 0.022
C609 87-010-400-080 CAP, ELECT 0.47-50V C902 87-018-205-080 CAP, CERA-SOL 0.022
C611 87-010-248-080 CAP, ELECT 220-10V C903 87-018-205-080 CAP, CERA-SOL 0.022
C904 87-018-205-080 CAP, CERA-SOL 0.022
C613 87-012-368-080 C-CAP,S 0.1-50 F CNA901 8A-CDB-621-010 CONN ASSY,3P POWER
C614 87-010-312-080 C-CAP,S 15P-50 CH
CN601 87-099-033-010 16P 6216 H ! PR901 87-A90-092-080 PROTECTOR,2.5A 491
CN602 87-099-201-010 CONN,8P 6216 H ! PT901 8A-CDB-653-010 PT,E 2.5W EI48X23
CNA604 8A-CDB-616-010 CONN ASSY,6P KEY FUNCT ! PT901 8A-CDB-651-010 PT,H 2.5W EI48X23
CNA606 8A-CDB-617-010 CONN ASSY,2P KEY VOL
FC601 8A-CDB-618-010 FF-CABLE, 16P 1.25 FR-MAIN BATT B C.B
FC602 8A-CDB-619-010 FF-CABLE, 8P 1.25 CD-FR
L601 87-003-102-080 COIL, 10UH
LED602 88-CD6-630-010 LED,934ID RED CD MOTOR C.B
LED608 88-CD6-630-010 LED,934ID RED M2 9X-262-576-910 MOTOR GEAR ASSY
LED611 87-CD8-616-010 LED,SA36-11 HWA-11.0 PIN3 91-564-722-110 CONNECTOR 6P
S601 8Z-CT6-636-010 SW,TACT EVQJAC04M SW1 91-572-085-120 LEAF SW
S602 8Z-CT6-636-010 SW,TACT EVQJAC04M
S603 8Z-CT6-636-010 SW,TACT EVQJAC04M
S604 8Z-CT6-636-010 SW,TACT EVQJAC04M
S605 8Z-CT6-636-010 SW,TACT EVQJAC04M
X601 87-030-273-010 VIB,XTAL 32.768K5PPM
X602 87-030-376-080 VIB,CER CSA5.76MG200
KEY FUNCT C.B
CN605 87-099-417-010 CONN 6P EH H WHT
LED606 88-CD6-630-010 LED,934ID RED
LED607 88-CD6-630-010 LED,934ID RED
LED610 88-CD6-631-010 LED,934GD GRN
S606 8Z-CT6-636-010 SW,TACT EVQJAC04M
S607 8Z-CT6-636-010 SW,TACT EVQJAC04M
S608 8Z-CT6-636-010 SW,TACT EVQJAC04M
S609 8Z-CT6-636-010 SW,TACT EVQJAC04M
S611 8Z-CT6-636-010 SW,TACT EVQJAC04M
6
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
Dimensions (mm) :A
Wattage Type Tolerance Symbol Form L W t Resistor Code : A
1/16W 1005 5% CJ 1.0 0.5 0.35 104
L
1/16W 1608 5% CJ t 1.6 0.8 0.45 108
1/10W 2125 5% CJ W 2 1.25 0.45 118
1/8W 3216 5% CJ 3.2 1.6 0.55 128
TRANSISTOR ILLUSTRATION
C
B
E
E C B E C B E C B
2SA1296 2SC2001 2SC1740S/SR/SRS DTC114YK
2SC1815 2SA1318TU 2SA933S/RS DTC114TK
DTC124XS DTA144TK
DTC114TS 2SC2714
B C E
2SB1655E
7
WIRING 1 (MAIN)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
8
WIRING 2 (BATT A / BATT B)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
9
WIRING 3 (TUNER : LH, HA)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
VC001 N
TUNING
O
P
Q
R
S
T
U
12
WIRING 4 (TUNER : K)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
VC001
K
TUNING
L
M
N
O
P
Q
R
S
T
U
14
WIRING 5 (FRONT / KEY FUNCT / VOL / PHONE)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
16
WIRING 6 (CD MOTOR)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
I CD MOTOR C.B B
M2
C
+ M2
(SLED MOTOR)
TO/FROM A MAIN C.B (2/2) CNA402
D
_ SW1 E
(INSIDE LIMIT SW)
M1 F
6
(SPINDLE MOTOR)
SW1
PIN3
G
1 _ + H
I
M1
J
K
L
PICK UP ASSY
SF-P101NR
M
N
O
P
Q
1 R
S
16
FC401
T
TO/FROM A MAIN C.B (2/2) CN401 U
18
IC BLOCK DIAGRAM
19
IC DESCRIPTION
IC, LC78622ED
Pin No. Pin Name I/O Description
1 DEFI I Defect detection signal (DEF) input. ("L" is applied when not used.)
2 TAI I For PLL/Test input. A pull-down resistor is incorporated.
3 PDO O Phase comparison output to control the external VCO.
4 VVSS Ground of the built-in VCO. Normally, 0V.
5 ISET I For the connection of a resistor which adjusts the PDO output current.
6 VVDD Power supply of the built-in VCO.
7 FR I Adjusts the VCO frequency range.
8 VSS Ground of digital circuits. Normally, 0V.
9 EFMO O For slice level control/EFM signal output.
10 EFMIN I EFM signal input.
11 T2 I Test input. A pull-down resistor is incorporated. Be sure to connect this to 0V.
12 CLV+
O Disc motor control tri-state outputs.
13 CLV-
Output to monitor the automatic switching between the rough servo control and phase servo
14 V/P O
control. "H" :Rough servo, "L": Phase servo.
15 HFL I Track detection signal input. Schmitt trigger input.
16 TES I Track error signal input. Schmitt trigger input.
17 TOFF O Tracking off output.
18 TGL O Tracking gain switching output. "L" raises the gain.
19 JP+
O Track jump control tri-state outputs.
20 JP-
21 PCK O Monitors the clock signal for EFM data playback.4.3218MHz when the phase is locked.
Sync signal detection output. Goes "H" when the sync signal detected from the EFM
22 FSEQ O
signal matches the sync signal generated internally. (Not used)
23 VDD Power supply of digital circuits.
24 SL+ I/O General purpose input/output 1. Controlled by serial data command issued by the microprocessor.
25 SL I/O General purpose input/output 2. Controlled by serial data command issued by the microprocessor.
26 NC Not connected.
27 PUIN I/O CD pickup inside limit switch.
28 RW I/O Serial data command sled signal output terminal from microprocessor.
29 EMPH O Deemphasis monitor. "H": when playing a deemphasis disc. (Not used)
30 C2F O C2 flag output. (Not used)
31 DOUT O Outputs a digital OUT signal. (EIAJ format) (Not used)
32 T3
I Test input. A pull-down resistor is incorporated. Be sure to connect this to 0V.
33 T4
34 N.C Not connected.
35 MUTEL O Lch 1-bit DAC/Lch muting output. (Not used)
20
Pin No. Pin Name I/O Description
36 LVDD Lch power supply.
37 LCHO O Lch output.
38 LVSS Lch ground. Normally, 0V.
39 RVSS Rch 1-bit DAC/Rch ground. Normally, 0V.
40 RCHO O Rch output.
41 RVDD Rch power supply.
42 MUTER O Rch muting output. (Not used)
43 XVDD Power supply of crystal oscillator.
44 XOUT O
For the connection of a 16.9344 MHz crystal oscillator.
45 XIN I
46 XVSS Ground of crystal oscillator. Normally, 0V.
47 SBSY O Subcode block sync signal output. (Not used)
48 EFLG O C1,C2,single,duplex correction monitor. (Not used)
49 PW O Output of subcodes P,Q,R,S,T,U and W. (Not used)
50 SFSY O Subcode frame sync signal output. Falls when the subcode is set to the standby state.(No used)
51 SBCK I Subcode read-out clock input. Schmitt trigger input.("L" is applied when not used.)
52 FSX O 7.35 kHz sync signal output obtained by dividing the oscillator frequency. (Not used)
53 WRQ O Subcode Q standby output.
54 RWC I Read/write control input. Schmitt trigger input.
55 SQOUT O Subcode Q output.
56 COIN I Command input from the microprocessor.
Command input retrieval clock or subcode retrieval clock input from SQOUT. Schmitt trigger
57 CQCK I
input.
58 RES I LC78622 reset input.
59 T11 O Test output. Set to open (normally, "L" output.) (Not used)
60 16M O 16.9344 MHz output. (Not used)
61 4.2M O 4.236 MHz output.
62 T5 I Test input. A pull-down resistor is incorporated. Be sure to connect to 0 V.
63 CS I Chip select input. A pull-down resistor is incorporated.
64 TEST1 I Test input with no pull-down resistor. Be sure to connect this to 0 V.
21
IC, LA9241ML
Pin No. Pin Name I/O Description
For the connection of the pickup photodiode. Addition to the FIN1 pin creates an RF
1 FIN2 O
signal and subtraction from it create an EF signal.
2 FIN1 O For the connection of the pickup photodiode.
For the connection of the pickup photodiode. Subtraction from the F pin creates a TE
3 E O
signal.
4 F O For the connection of the pickup photodiode.
5 TB I Inputs the DC components in the TE signal.
For the connection of a resistor which sets the gain of the TE signal between this pin
6 TE O
and the TE pin.
7 TE O TE signal output.
8 TESI I TES (track error sense) comparator input.The TE signal is passed through a BPF.
9 SCI I Shock detection input.
10 TH I Sets the time constant for the tracking gain.
11 TA O TA amp output.
12 TD I Composes the tracking phase compensation constant between the TD and VR pins.
13 TD O Sets the tracking phase compensation.
14 JP I Sets the amplitude of the tracking jump signal (kick pulses).
15 TO O Tracking control signal output.
16 FD O Focusing control signal output.
17 FD I Composes the focusing phase compensation constant between the FD and FA pins.
18 FA O Composes the focusing phase compensation constant between the FD- and FA- pins.
19 FA I Composes the focusing phase compensation constant between the FA and FE pins.
20 FE O FE signal output.
For the connection of a resistor whichs sets the gain of the FE signal between this pin
21 FE I
and the TE pin.
22 AGND O Ground of analog signals.
23 SP O Single-ended output of the signals input to the CV+ and CV- pins.
24 SPI I Spindle amp input.
25 SPG I For the connection of a resistor which sets the gain in the spindle 12cm mode.
26 SP I For the connection of the spindle phase compensation constant with the SPD pin.
27 SPD O Spindle control signal output.
28 SLEQ I For the connection of sled phase compensation constant.
29 SLD O Sled control signal output.
30 SL
I Sled feed signal input from the microprocessor.
31 SL+
32 JP
I Tracking signal input from the DSP.
33 JP+
34 TGL I Tracking gain control signal input from the DSP. Low gain when TGL is "H".
35 TOFF I Tracking off control signal input from the DSP. Off when TOFF is "H".
36 TES O Outputs the TES signal to the DSP.
22
Pin No. Pin Name I/O Description
The HFL (high frequency level) signal is used to judge whether the main beam is positioned on
37 HFL O
the pit or on the mirror.
38 SLOF I Sled servo off control input.
39 CV
I CLV error signal input from the DSP.
40 CV+
41 RFSM O RF output.
42 RFS O Sets the RF gain and the EFM signal's 3T compensation constant together with the RFSM pin.
The SLC (slice level control) signal is output to control the DSP's data slice level of the RF
43 SLC O
waveform.
44 SL1 I Input to control the DSP's data slice level.
45 DGND Ground of digital signals.
46 FSC O Output for the focus search smoothing capacitor.
47 TBC I The TBC (tracking balance control) signal sets the EF balance variation range.
48 NC Not connected.
49 DEF O Disc defect detection output.
50 CLK I Reference clock input. 4.23 MHz is input from the DSP.
51 CL I Microprocessor command clock input.
52 DAT I Microprocessor command data input.
53 CE I Microprocessor chip enable input.
54 DRF O DRF (detect RF) is an output to detect the RF level.
The FSS (focus search select) signal switches the focus search modes (+/-search / +search with
55 FSS I
respect to the reference voltage).
56 VCC2 VCC of servo and digital circuits.
57 REF1 _ For the connection of bypass capacitor for the reference voltage.
58 VR O Reference voltage output.
59 LF2 Sets the time constant for disc defect detection.
60 PH1 For the connection of a capacitor to hold the RF signal peak.
61 BH1 For the connection of a capacitor to hold the RF signal bottom.
62 LDD O APC circuit output.
63 LDS I APC circuit input.
64 VCC1 VCC of RF signal circuits.
23
IC, LC865516A-5P16
Pin No. Pin Name I/O Description
1 SEG E O SEG E