Text preview for : hfe_aiwa_csd-el300_service_en.pdf part of Aiwa CSD-EL300 COMPACT DISC STEREO RADIO
CASSETTE RECORDER Service Manual
BASIC TAPE MECHANISM : 2ZM-1YR7NC
BASIC CD MECHANISM : 3ZG-3 E2NC
Back to : hfe_aiwa_csd-el300_servic | Home
CSD-EL300 US
SERVICE MANUAL
COMPACT DISC STEREO RADIO BASIC TAPE MECHANISM : 2ZM-1YR7NC
CASSETTE RECORDER BASIC CD MECHANISM : 3ZG-3 E2NC
TA
DA
S/M Code No. 09-003-344-1N1
SPECIFICATIONS
· Design and specifications are subject to change without
notice .
ACCESSORIES/PACKAGE LIST
REF. NO PART NO. KANRI DESCRIPTION
NO.
1 8A-CH2-903-010 IB,U(ESF)FM
2 8A-CH2-950-010 RC UNIT,ACH-2
! 3 87-A80-027-010 AC CORD SET,U BLK SPT2
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the CAUTION
instructions below when servicing. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
WARNING! radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO ATTENTION
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE L'utilisation de commandes, réglages ou procédures autres que
FROM A DISTANCE OF MORE THAN 30cm FROM THE ceux spécifiés peut entraîner une dangereuse exposition aux
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL radiations.
PICK-UP BLOCK.
ADVARSEL!
Caution: Invisible laser radiation when
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
open and interlocks defeated avoid expo-
af funktion. Undgå udsættelse for stråling.
sure to beam.
Advarsel:Usynling laserståling ved åbning,
This Compact Disc player is classified as a CLASS 1 LASER
når sikkerhedsafbrydere er ude af funktion.
product.
Undgå udsættelse for stråling.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-
ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-
CLASS 1 LASER PRODUCT
tävälle näkymättömälle lasersäteilylle. KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
Precaution to replace Optical block
(KSS-213F)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
3
ELECTRICAL MAIN PARTS LIST
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
IC C233 87-010-546-080 CAP, ELECT 0.33-50V
C234 87-010-546-080 CAP, ELECT 0.33-50V
87-A21-550-010 IC,TA2149N C235 87-018-209-080 CAP, CER 0.1-50V
87-A21-185-040 C-IC,LC72121M C236 87-018-209-080 CAP, CER 0.1-50V
87-A21-090-010 IC,LA4600 C237 87-010-370-080 CAP, ELECT 330-6.3V
87-A21-416-040 C-IC,M61500FP
87-A21-607-010 IC,NJM14558LD C238 87-010-263-080 CAP, ELECT 100-10V
C239 87-018-134-080 CAPACITOR,TC-U 0.01-16
87-017-915-080 IC,BU4094BCF C240 87-018-134-080 CAPACITOR,TC-U 0.01-16
87-A20-446-010 C-IC,LA9241ML C241 87-010-401-080 CAP, ELECT 1-50V
87-A20-187-010 IC,LC78622E C242 87-010-401-080 CAP, ELECT 1-50V
87-A21-093-010 IC,LA6541D
8A-CH2-612-010 C-IC,LC867132-5P07 C243 87-010-401-080 CAP, ELECT 1-50V
C244 87-010-401-080 CAP, ELECT 1-50V
87-A20-911-010 IC,RPM6938 C245 87-010-401-080 CAP, ELECT 1-50V
87-001-982-010 IC,TA7291S C246 87-010-401-080 CAP, ELECT 1-50V
C263 87-018-131-080 CAP, CER 1000P-50V
TRANSISTOR C264 87-018-131-080 CAP, CER 1000P-50V
C265 87-010-545-080 CAP, ELECT 0.22-50V
89-327-143-080 TR,2SC2714 (0.1W) C266 87-010-545-080 CAP, ELECT 0.22-50V
87-026-447-080 TR,2SC1740S R C271 87-010-221-080 CAP, ELECT 470-10V
89-111-624-080 TR,2SA1162Y C272 87-010-221-080 CAP, ELECT 470-10V
87-026-213-080 CHIP-TR,DTC114YK
89-327-125-080 CHIP TR,2SC2712GR C277 87-010-404-080 CAP, ELECT 4.7-50V
C278 87-010-263-080 CAP, ELECT 100-10V
87-A30-090-080 FET,2SK2541 C279 87-010-263-080 CAP, ELECT 100-10V
87-A30-151-080 TR,2SA1993F C287 87-018-130-080 CAP,TC-U 820P-50 B
87-026-610-080 TR,KTC3198GR C288 87-018-130-080 CAP,TC-U 820P-50 B
87-A30-190-080 TR,CC5551
87-026-502-080 DTC144TS C301 87-018-131-080 CAP, CER 1000P-50V
C302 87-018-131-080 CAP, CER 1000P-50V
87-A30-154-080 TR,RT1N441S C305 87-010-263-080 CAP, ELECT 100-10V
87-026-463-080 TR,2SA933S (0.3W) C306 87-010-263-080 CAP, ELECT 100-10V
89-109-332-380 TR,2SA933RS C307 87-018-203-080 CAP, CER 8200P-16V
89-113-184-080 TR,2SA1318T
87-026-464-080 TR,DTC114TS (0.3W) C308 87-018-203-080 CAP, CER 8200P-16V
C311 87-010-546-080 CAP, ELECT 0.33-50V
87-026-218-080 TR,DTC144ES (0.2W) C312 87-010-546-080 CAP, ELECT 0.33-50V
89-318-155-080 TR,2SC1815 (0.4W) C313 87-018-201-080 CAP,TC-U 5600P-16 X
89-112-965-080 TR,2SA1296 (0.75W) C314 87-018-201-080 CAP,TC-U 5600P-16 X
87-026-291-080 TR,DTC124XS
89-318-154-080 TR,2SC1815 (0.4W) C321 87-018-205-080 CAP, CERA-SOL 0.022
C323 87-018-041-080 CAP,TC-S 560P-50 B
89-213-702-010 TR,2SB1370 (1.8W) C324 87-018-041-080 CAP,TC-S 560P-50 B
87-026-462-080 TR,2SC1740 S(RS 0.3W) C331 87-018-126-080 CAP,TC-U 390P-50 B
87-026-237-080 CHIP-TR,DTC124XK C332 87-018-126-080 CAP,TC-U 390P-50 B
87-A30-075-080 C-TR,2SA1235F
87-026-235-080 CHIP-TR,DTC114EK C333 87-018-128-080 CAP, CERA-SOL SS 560P
C334 87-018-131-080 CAP, CER 1000P-50V
87-026-245-080 TR,DTC114ES C335 87-018-201-080 CAP,TC-U 5600P-16 X
89-109-521-080 TR,2SA952 (0.6W) C336 87-018-134-080 CAPACITOR,TC-U 0.01-16
C337 87-018-198-080 CAP,TC-U 2700P-16 X
DIODE C338 87-018-198-080 CAP,TC-U 2700P-16 X
C339 87-018-198-080 CAP,TC-U 2700P-16 X
87-070-345-080 DIODE,IN4148 C340 87-010-382-080 CAP, ELECT 22-25V
87-A40-616-070 VARI-CAP,SVC384(S/T) C341 87-018-205-080 CAP, CERA-SOL 0.022
87-A40-128-080 C-VARI-CAP,HVU202A C342 87-018-123-080 CAP, CER 220P-50V
87-017-072-080 ZENER,HZS3B1
87-020-465-080 DIODE,1SS133 (110MA) C343 87-018-199-080 CAP, CER 3300P
C345 87-018-131-080 CAP, CER 1000P-50V
87-020-465-010 DIODE,1SS133 (110MA) C346 87-018-131-080 CAP, CER 1000P-50V
87-001-936-080 ZENER,HZS7A3L C347 87-010-374-080 CAP, ELECT 47-10V
87-017-149-080 ZENER,HZS6A2L C348 87-018-131-080 CAP, CER 1000P-50V
87-017-161-080 ZENER,HZS7C2L
87-017-148-080 ZENER,HZS6A1L C355 87-A11-131-080 CAP,TC U 8200P-50 K B
C356 87-A11-131-080 CAP,TC U 8200P-50 K B
87-017-144-080 ZENER,HZS24 2 C363 87-010-405-080 CAP, ELECT 10-50V
87-001-142-080 DIODE,1SS294 (100MA) C364 87-010-405-080 CAP, ELECT 10-50V
87-020-125-080 DIODE,1SS181 (100MA) C367 87-018-043-080 CAP,TC-S 820P-50 B
87-020-027-080 CHIP-DIODE 1SS184
87-A40-465-090 DIODE,FR202 C368 87-018-043-080 CAP,TC-S 820P-50 B
C369 87-018-118-080 CAP,TC-U 82P-50 B
C370 87-018-118-080 CAP,TC-U 82P-50 B
MAIN C.B C373 87-010-401-080 CAP, ELECT 1-50V
C374 87-010-401-080 CAP, ELECT 1-50V
C211 87-010-405-080 CAP, ELECT 10-50V
C212 87-010-405-080 CAP, ELECT 10-50V C382 87-010-401-080 CAP, ELECT 1-50V
C220 87-010-406-080 CAP, ELECT 22-50 C383 87-010-248-080 CAP, ELECT 220-10V
C229 87-018-125-080 CAP, CER 330P-50V C384 87-010-374-080 CAP, ELECT 47-10V
C230 87-018-134-080 CAPACITOR,TC-U 0.01-16 C387 87-018-123-080 CAP, CER 220P-50V
C511 87-010-263-080 CAP, ELECT 100-10V
4
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
C513 87-018-134-080 CAPACITOR,TC-U 0.01-16 C467 87-010-263-080 CAP, ELECT 100-10V
C514 87-010-248-080 CAP, ELECT 220-10V C468 87-018-119-080 CAP, CER 100P-50V
C520 87-010-384-080 CAP, ELECT 100-25V C469 87-018-121-080 CAP, CER 150P-50V
C521 87-016-495-000 CAP,E 3300-25 M SMG C470 87-010-544-080 CAP, ELECT 0.1-50V
C526 87-010-404-080 CAP, ELECT 4.7-50V C471 87-A11-144-080 CAPACITOR,TC-U 0.1-16
C527 87-010-401-080 CAP, ELECT 1-50V C472 87-A11-144-080 CAPACITOR,TC-U 0.1-16
C528 87-010-221-080 CAP, ELECT 470-10V C473 87-A11-144-080 CAPACITOR,TC-U 0.1-16
C529 87-010-263-080 CAP, ELECT 100-10V C474 87-A11-144-080 CAPACITOR,TC-U 0.1-16
C530 87-010-248-080 CAP, ELECT 220-10V C475 87-018-134-080 CAPACITOR,TC-U 0.01-16
C531 87-010-265-080 CAP, ELECT 33-16V C476 87-010-236-080 CAP,E 1000-10 SME
C536 87-010-263-080 CAP, ELECT 100-10V C477 87-018-134-080 CAPACITOR,TC-U 0.01-16
C543 87-010-401-080 CAP, ELECT 1-50V C478 87-010-263-080 CAP, ELECT 100-10V
CN201 87-A60-054-010 CONN,14P V 9604S-14C C479 87-018-134-080 CAPACITOR,TC-U 0.01-16
CN202 87-A60-058-010 CONN,10P V 9604S-10C C480 87-010-221-080 CAP, ELECT 470-10V
CN203 87-049-469-010 CONN,4P V C481 87-010-405-080 CAP, ELECT 10-50V
CN301 87-A60-112-010 CONN,7P V S2M-7W C482 87-010-405-080 CAP, ELECT 10-50V
CN501 87-099-827-010 CONN,3P S2M-3W C483 87-018-123-080 CAP, CER 220P-50V
CNA1 8A-CH2-631-010 CONN ASSY,6P TU-AF C484 87-018-123-080 CAP, CER 220P-50V
J201 87-009-216-010 JACK, DIA 3.5 C487 87-018-134-080 CAPACITOR,TC-U 0.01-16
L301 87-003-131-080 COIL, 10MH C489 87-018-209-080 CAP, CER 0.1-50V
L331 87-007-342-010 COIL,OSC 85K BIAS C490 87-018-209-080 CAP, CER 0.1-50V
C491 87-018-134-080 CAPACITOR,TC-U 0.01-16
C492 87-010-221-080 CAP, ELECT 470-10V
CD MAIN C.B C493 87-018-197-080 CAP, CER 1800P-50V
C494 87-010-405-080 CAP, ELECT 10-50V
C401 87-010-403-080 CAP, ELECT 3.3-50V
C402 87-018-134-080 CAPACITOR,TC-U 0.01-16 C501 87-018-119-080 CAP, CER 100P-50V
C403 87-010-263-080 CAP, ELECT 100-10V C502 87-018-119-080 CAP, CER 100P-50V
C404 87-010-248-080 CAP, ELECT 220-10V C503 87-018-119-080 CAP, CER 100P-50V
C405 87-018-134-080 CAPACITOR,TC-U 0.01-16 C504 87-018-119-080 CAP, CER 100P-50V
C505 87-018-119-080 CAP, CER 100P-50V
C406 87-010-374-080 CAP, ELECT 47-10V
C407 87-018-131-080 CAP, CER 1000P-50V C506 87-018-119-080 CAP, CER 100P-50V
C409 87-010-248-080 CAP, ELECT 220-10V C901 87-018-134-080 CAPACITOR,TC-U 0.01-16
C410 87-010-263-080 CAP, ELECT 100-10V C902 87-010-263-080 CAP, ELECT 100-10V
C412 87-010-401-080 CAP, ELECT 1-50V C903 87-018-209-080 CAP, CER 0.1-50V
CN401 87-A60-424-010 CONN,16P V TOC-B
C414 87-010-405-080 CAP, ELECT 10-50V
C416 87-010-545-080 CAP, ELECT 0.22-50V CN402 87-A60-061-010 CONN,06P V 9604S-06C
C417 87-018-125-080 CAP, CER 330P-50V CN403 87-A60-062-010 CONN,05P V 9604S-05C
C425 87-018-129-080 CAP, CER 680P-50V X401 81-592-641-010 VIB,CER 16.93MHZ
C429 87-018-133-080 CAPACITOR,CER 4700P-16V
C430 87-018-123-080 CAP, CER 220P-50V TU C.B
C431 87-010-545-080 CAP, ELECT 0.22-50V
C432 87-010-374-080 CAP, ELECT 47-10V C1 87-010-314-080 C-CAP,S 22P-50V
C433 87-010-401-080 CAP, ELECT 1-50V C2 87-010-316-080 C-CAP,S 33P-50 CH
C434 87-018-199-080 CAP, CER 3300P C3 87-010-314-080 C-CAP,S 22P-50V
C5 87-016-669-080 C-CAP,S 0.1-25 K B
C435 87-018-134-080 CAPACITOR,TC-U 0.01-16 C6 87-010-313-080 CAP, CHIP 18P
C436 87-010-374-080 CAP, ELECT 47-10V
C437 87-010-404-080 CAP, ELECT 4.7-50V C7 87-014-049-080 CAP,PP 470P-100 J
C438 87-018-209-080 CAP, CER 0.1-50V C8 87-012-349-080 C-CAP,S 1000P-50 CH
C439 87-018-131-080 CAP, CER 1000P-50V C10 87-010-197-080 CAP, CHIP 0.01 DM
C11 87-010-197-080 CAP, CHIP 0.01 DM
C440 87-018-139-080 CAP,TC-U 1P-50 CH C12 87-010-197-080 CAP, CHIP 0.01 DM
C442 87-018-149-080 CAP,TC-U 15P-50 CH
C443 87-018-209-080 CAP, CER 0.1-50V C13 87-010-150-080 C-CAP,S 6P-50 CH
C444 87-018-134-080 CAPACITOR,TC-U 0.01-16 C14 87-010-303-080 C-CAP,S 330P-50CH
C445 87-018-209-080 CAP, CER 0.1-50V C15 87-010-178-080 CHIP CAP 1000P
C16 87-010-374-080 CAP, ELECT 47-10V
C446 87-018-209-080 CAP, CER 0.1-50V C17 87-010-198-080 CAP, CHIP 0.022
C447 87-018-209-080 CAP, CER 0.1-50V
C448 87-018-111-080 CAP, CERA-SOL SS 27P C18 87-015-835-080 C-CAP,0.047 D
C450 87-018-127-080 CAP, CER 470P-50V C19 87-010-263-080 CAP, ELECT 100-10V
C451 87-018-123-080 CAP, CER 220P-50V C20 87-010-404-080 CAP, ELECT 4.7-50V
C21 87-010-197-080 CAP, CHIP 0.01 DM
C455 87-010-263-080 CAP, ELECT 100-10V C22 87-010-197-080 CAP, CHIP 0.01 DM
C457 87-018-113-080 CAP, CER 33P-50V
C458 87-018-113-080 CAP, CER 33P-50V C23 87-010-197-080 CAP, CHIP 0.01 DM
C459 87-010-263-080 CAP, ELECT 100-10V C24 87-010-303-080 C-CAP,S 330P-50CH
C460 87-018-209-080 CAP, CER 0.1-50V C25 87-016-460-080 C-CAP,S 0.22-16 B
C27 87-A11-067-080 C-CAP,S 1-10 K B
C461 87-018-209-080 CAP, CER 0.1-50V C28 87-016-669-080 C-CAP,S 0.1-25 K B
C462 87-010-248-080 CAP, ELECT 220-10V
C463 87-018-134-080 CAPACITOR,TC-U 0.01-16 C29 87-016-669-080 C-CAP,S 0.1-25 K B
C465 87-010-404-080 CAP, ELECT 4.7-50V C30 87-010-365-080 CAP, CHIP 0.027
C466 87-018-209-080 CAP, CER 0.1-50V C31 87-010-365-080 CAP, CHIP 0.027
C33 87-012-358-080 C-CAP,S 0.47-10 F Z
5
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
C34 87-012-358-080 C-CAP,S 0.47-10 F Z C622 87-012-154-080 C-CAP,S 150P-50 CH
C35 87-015-819-080 CAPACITOR,0.01 C623 87-012-154-080 C-CAP,S 150P-50 CH
C36 87-010-263-080 CAP, ELECT 100-10V C625 87-010-322-080 C-CAP,S 100P-50 CH
C37 87-010-197-080 CAP, CHIP 0.01 DM C626 87-010-197-080 CAP, CHIP 0.01 DM
C38 87-010-374-080 CAP, ELECT 47-10V C627 87-010-196-080 CHIP CAPACITOR,0.1-25
C39 87-010-404-080 CAP, ELECT 4.7-50V C628 87-015-677-080 CAP,E 100-6.3 7L
C40 87-010-197-080 CAP, CHIP 0.01 DM C628 87-015-819-080 CAPACITOR,0.01
C41 87-010-178-080 CHIP CAP 1000P C629 87-010-318-080 C-CAP,S 47P-50 CH
C42 87-010-178-080 CHIP CAP 1000P C630 87-010-178-080 CHIP CAP 1000P
C43 87-010-178-080 CHIP CAP 1000P C631 87-010-322-080 C-CAP,S 100P-50 CH
C44 87-010-311-080 CAP 12P C632 87-010-318-080 C-CAP,S 47P-50 CH
C45 87-010-312-080 C-CAP,S 15P-50 CH C633 87-010-322-080 C-CAP,S 100P-50 CH
C46 87-010-197-080 CAP, CHIP 0.01 DM C634 87-015-677-080 CAP,E 100-6.3 7L
C47 87-010-197-080 CAP, CHIP 0.01 DM C635 87-010-197-080 CAP, CHIP 0.01 DM
C48 87-010-197-080 CAP, CHIP 0.01 DM CN601 87-099-203-010 CONN,10P 6216 H
C49 87-012-140-080 CAP 470P CN602 87-099-031-010 CONN,14P 6216 H
C50 87-010-197-080 CAP, CHIP 0.01 DM CNA602 8A-CH2-625-010 CONN ASSY,9P TA-ME
C71 87-010-197-080 CAP, CHIP 0.01 DM D601 87-A40-162-010 LED,L-1154SRD
C72 87-010-263-080 CAP, ELECT 100-10V L601 87-003-171-010 COIL,15UH TROIDAL
C73 87-010-197-080 CAP, CHIP 0.01 DM LCD601 8A-CH2-611-010 LCD,AIW4213
C75 87-010-197-080 CAP, CHIP 0.01 DM !R668 87-029-124-010 RES,FUSE 2.2-1/4
C91 87-012-140-080 CAP 470P S381 87-A91-636-010 SW,RTRY 1-2-24 EVEGA1F2024B
C92 87-010-197-080 CAP, CHIP 0.01 DM SW601 87-A90-095-080 SW,TACT EVQ11G04M
C93 87-010-197-080 CAP, CHIP 0.01 DM SW602 87-A90-095-080 SW,TACT EVQ11G04M
CF1 87-A91-094-010 FLTR,CDA10.7 MG80A SW603 87-A90-095-080 SW,TACT EVQ11G04M
CF2 87-008-261-010 FILTER, SFE10.7MA5-A SW604 87-A90-095-080 SW,TACT EVQ11G04M
CF3 87-008-261-010 FILTER, SFE10.7MA5-A SW605 87-A90-095-080 SW,TACT EVQ11G04M
CN2 87-099-854-010 CONN,6P S2M-6W SW606 87-A90-095-080 SW,TACT EVQ11G04M
CN3 87-A60-110-010 CONN,4P V S2M-4W SW607 87-A90-095-080 SW,TACT EVQ11G04M
HD1 88-CD6-661-010 HLDR,BAR ANT. SW608 87-A90-095-080 SW,TACT EVQ11G04M
HD2 88-CD6-661-010 HLDR,BAR ANT. SW609 87-A90-095-080 SW,TACT EVQ11G04M
L2 87-A50-560-010 COIL,FM BPF(ACD) SW610 87-A90-095-080 SW,TACT EVQ11G04M
L3 8A-CH4-670-010 BAR-ANT,MW 2B-ACH(COI) SW612 87-A90-095-080 SW,TACT EVQ11G04M
L4 87-A50-420-010 COIL,MW OSC(SYN) SW613 87-A90-095-080 SW,TACT EVQ11G04M
L5 87-A50-566-010 COIL,FM RF EX(ACH) SW614 87-A90-095-080 SW,TACT EVQ11G04M
L6 87-A50-567-010 COIL,FM OSC(ACH) SW615 87-A90-095-080 SW,TACT EVQ11G04M
L7 87-A91-308-010 FLTR,PCFAZH- 450T (TOK) SW616 87-A90-095-080 SW,TACT EVQ11G04M
L8 87-005-849-080 COIL,10UH(CECS) SW617 87-A90-095-080 SW,TACT EVQ11G04M
TC1 87-011-254-080 TRIMER,20P LAR SW618 87-A90-095-080 SW,TACT EVQ11G04M
X1 87-A70-061-010 VIB,XTAL 4.500MHZ CSA-309 SW619 87-A90-095-080 SW,TACT EVQ11G04M
X601 87-030-273-010 VIB,XTAL 32.768K5PPM
FRONT C.B X602 87-A70-070-080 VIB,CER 5.76MHZ CRHF
C601 87-010-263-080 CAP, ELECT 100-10V
C601 87-010-555-040 CAP,E 100-10 GAS PWR C.B
C602 87-010-197-080 CAP, CHIP 0.01 DM
C603 87-015-696-080 CAP,E 2.2-50 7L C701 87-018-205-080 CAP, CERA-SOL 0.022
C603 87-010-495-040 CAP,E 2.2-50 GAS C702 87-018-205-080 CAP, CERA-SOL 0.022
C703 87-018-205-080 CAP, CERA-SOL 0.022
C604 87-010-754-080 CAP,E220-10 SRA 7L C704 87-018-205-080 CAP, CERA-SOL 0.022
C605 87-010-196-080 CHIP CAPACITOR,0.1-25 FC701 87-A90-160-080 FUSE CLAMP,FC 51F
C606 87-015-696-080 CAP,E 2.2-50 7L
C606 87-010-495-040 CAP,E 2.2-50 GAS FC702 87-A90-160-080 FUSE CLAMP,FC 51F
C607 87-015-694-080 CAP,E 0.47-50 7L
C607 87-010-493-040 CAP,E 0.47-50 GAS LED C.B
C608 87-010-196-080 CHIP CAPACITOR,0.1-25
C609 87-010-313-080 CAP, CHIP 18P CNA601 8A-CH2-624-010 CONN ASSY,4P FR-TU
C610 87-010-314-080 C-CAP,S 22P-50V D651 87-A40-161-010 LED,L-1154SGD
C611 87-010-317-080 C-CAP,S 39P-50 CH D652 87-A40-161-010 LED,L-1154SGD
D653 87-A40-161-010 LED,L-1154SGD
C612 87-010-317-080 C-CAP,S 39P-50 CH D654 87-A40-161-010 LED,L-1154SGD
C613 87-010-312-080 C-CAP,S 15P-50 CH
C614 87-010-754-080 CAP,E220-10 SRA 7L D655 87-A40-161-010 LED,L-1154SGD
C616 87-010-322-080 C-CAP,S 100P-50 CH D656 87-A40-161-010 LED,L-1154SGD
C617 87-010-322-080 C-CAP,S 100P-50 CH D657 87-A40-161-010 LED,L-1154SGD
D658 87-A40-161-010 LED,L-1154SGD
C618 87-010-197-080 CAP, CHIP 0.01 DM D659 87-A40-161-010 LED,L-1154SGD
C619 87-010-197-080 CAP, CHIP 0.01 DM
C620 87-018-044-080 CAP,TC-S 1000P-50 B D660 87-A40-161-010 LED,L-1154SGD
C620 87-010-178-080 CHIP CAP 1000P
C621 87-010-405-080 CAP, ELECT 10-50V
6
REF. NO PART NO. KANRI DESCRIPTION
NO.
MOTOR C.B
CON1 87-099-210-010 CONN,5P 6216 H
M1 87-045-305-010 MOTOR,RF-500TB DC-5V (2MA)
SW1 87-036-110-010 PUSH SWITCH
SW2 87-036-110-010 PUSH SWITCH
BATT2 C.B
· Regarding connectors, they are not stocked as they are not the initial order items.
The connectors are available after they are supplied from connector manufacturers upon the order is received.
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
Dimensions (mm) :A
Wattage Type Tolerance Symbol Form L W t Resistor Code : A
1/16W 1005 5% CJ 1.0 0.5 0.35 104
L
1/16W 1608 5% CJ t 1.6 0.8 0.45 108
1/10W 2125 5% CJ W 2 1.25 0.45 118
1/8W 3216 5% CJ 3.2 1.6 0.55 128
TRANSISTOR ILLUSTRATION
C
B
ECB ECB E ECB ECB ECB
2SA933 2SA952 2SA1162 DTC124XS 2SK2541 DTC114TS
2SA1296 2SA1235 DTC114ES
2SA1318 2SC2712
2SA1993 2SC2714
2SC1740 DTC114YK
2SC1815 DTC124XK
CC5551 DTC144EK
KTC3198 RT1N441S
7
LCD DISPLAY
LCD, AIW4213
8
SCHEMATIC DIAGRAM-1 (MAIN)
9 10
SCHEMATIC DIAGRAM-2 (CD MAIN)
11 12
WIRING-1 (MAIN/CD MAIN)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
B
C
D
E
F
G
H
I
J
K
13 14
WIRING-2 (PWR/BATT) WIRING-3 (TU)
1 2 3 4 5 6 7 1 2 3 4 5 6 7
A A
B B
!
C C
F705
D D: 2.5A T 250V ! D
U: JW
E E
F F
G G
H H
I I
J J
K K
15 16
SCHEMATIC DIAGRAM-3 (TU)
17
0.8
4.5 R005
0/1.2 4.8
4.5 4.6
4.7 4.8
4.2 3.0
4.7 0/4.7
0 0.9
0.4 1.0 C026
0.7
1.3
1.3
18
2.8
0/2.0
3.9/0
4.1/0
TU: 4.7 OTHER: 0
2.3
0
2.3
7.8
SCHEMATIC DIAGRAM-4 (FRONT)
SOL2
19 20
WIRING-4 (FRONT)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A
B
C
D
E
F
G
H
I
J
K
21 22
ELECTRICAL ADJUSTMENT PRACTICAL SERVICE FIGURE
< TUNER SECTION > < TUNER SECTION >
MAIN C.B 1. AM IF Adjustment < FM SECTION >
L007 ....................................................................... 450kHz IHF Sensitiviy: Less than 18dB
(THD 3%) (at 98MHz)
2. AM VT Adjustment Signal to Noise Ratio: Mono: More than 60dB
6 Settings: · Test point: C39+
· Adjustment location: L004
(Input 60dB) Stereo: More than 53dB
Distortion:
L331 Method: Set to AM 1000kHz adjust L004 so that the test (Input: 60dB) Less than 2% (at 98MHz)
point becomes 3.7V±0.02V (Input: 120dB) Less than 3% (at 98MHz)
Auto stop level: 28dB±8dB (at 98MHz)
3. AM Tracking Adjustment Stereo separation: More than 28dB (at 98MHz)
L003 ....................................................................... 600kHz Intermediate frequency: 10.7MHz
TC001, L007 ........................................................ 1400kHz
< AM SECTION >
4. FM VT Adjustment
Settings: · Test point: C39+ Sensitivity: Less than 48dB
· Adjustment location: L006 (S/N 10dB) (at 600kHz)
Method: Set to FM 108MHz adjust L006 so that the test Less than 46dB
point becomes 6.0V±0.2V (at 1000kHz)
Less than 44dB
5. FM Tracking Adjustment (at 1400kHz)
L005 ........................................................................ 98MHz Signal to Noise Ratio: More than 30dB
(at 600, 1000, 1400kHz)
J201
Distortion:
< DECK SECTION >
(Input: 74dB) Less than 3% (at 1000kHz)
6. Bias frequency Adjustment (Input: 115dB) Less than 10%
L331 .............................................................. 75Hz±500Hz (at 1000kHz)
78 L003
(BAR-ANT) Auto stop level: Less than 60dB
7. Tape speed Adjustment (at 1000kHz)
Settings: · Test tape: TTA-100 Intermediate frequency: 450kHz
· Test point: PHONES JACK (J201)
TU C.B 3 M1
(DECK MOTOR)
· Adjustment location: SFR of deck motor
Method: Play back the test tape and adjust so that the
< DECK SECTION >
7 output frequency is 3000Hz ±30Hz. Tape speed:
Wow & flutter:
3000Hz±60Hz
Less than 0.35% (R.M.S)
8. Azimuth Adjustment Take-up torque: 30-60g-cm (FWD)
Settings: · Test tape: TTA-320 FF&REW torque: 75-160g-cm
· Test point: PHONES JACK (J201) Distortion: Less than 5% (REC/PB, 1kHz)
· Adjustment location: Azimuth adjustment S/N ratio: More than 40dB (PB, AC, DC)
screw More than 40dB
L005 TC001 (REC/PB, AC, DC)
Method: Play back the test tape and adjust so that the
5 3 output is maximum. Max Noise level: Less than 35mV
8 (PB, VOL MAX)
Erasing Ratio: More than 40dB
Test tape: TTA-320
L007 TTA-602 (NORMAL)
IC001 L004 TTA-615 (HIGH POSITION)
13 L006 2
4
C39
+
24
23 24
IC BLOCK DIAGRAM
IC, TA2149N
IC, LC72121M
25
IC, M61500FP
INA1 1 24 INA2
Mono.SW
INB1 2 23 INB2
INC1 3 MUTE 22 INC2
IND1 4 21 IND2
INE1 5 VOL VOL 20 INE2
Treble Treble
boost boost
QF1 6 19 QF4
QF2 7 18 QF3
TONEH1 8 17 TONEH2
ATT ATT
TONEL1 9 16 TONEL2
Bass Bass
OUT1 10 boost boost 15 OUT2
GND 11 14 VSS
VDD 12 Control logic 13 CONT
IC, BU4094BCF
26
IC, LA6541D
27
IC DESCRIPTION
IC, LA9241ML
Pin No. Pin Name I/O Description
Pin to which external pickup photo diode is connected. RF signal is created by adding
1 FIN2 I
with the FIN1 pin signal. FE signal is created by subtracting from the FIN1 pin signal.
2 FIN1 I Pin to which external pickup photo diode is connected.
Pin to which external pickup photo diode is connected. TE signal is created by
3 E I
subtracting from the F pin signal.
4 F I Pin to which external pickup photo diode is connected.
5 TB I DC component of the TE signal is input.
6 TE I Pin to which external resistor setting the TE signal gain is connected between the TE pin.
7 TE O TE signal output pin.
TES "Track Error Sense" comparator input pin. TE signal is passed through a band-
8 TESI I
pass filter then input.
9 SCI I Shock detection signal input pin.
10 TH I Tracking gain time constant setting pin.
11 TA O TA amplifier output pin.
Pin to which external tracking phase compensation constants are connected between
12 TD I
the TD and VR pins.
13 TD I Tracking phase compensation setting pin.
14 JP I Tracking jump signal (kick pulse) amplitude setting pin.
15 TO O Tracking control signal output pin.
16 FD O Focusing control signal output pin.
Pin to which external focusing phase compensation constants are connected between
17 FD I
the FD and FA pins.
Pin to which external focusing phase compensation constants are connected between
18 FA I
the FD and FA pins.
Pin to which external focusing phase compensation constants are connected between
19 FA I
the FA and FE pins.
20 FE O FE signal output pin.
21 FE I Pin to which external FE signal gain setting resistor is connected between the FE pin.
22 AGND -- Analog signal GND.
23 SP -- No connection.
24 SPI O Single ended output of the CV+ and CV pin input signal.
25 SPG I Pin to which external spindle gain setting resistor in 12 cm mode is connected.
Pin to which external spindle phase compensation constants are connected together
26 SP I
with SPD pin.
27 SPD O Spindle control signal output pin.
28 SLEQ I Pin to which external sled phase compensation constants are connected.
29 SLD O Sled control signal output pin.
30, 31 SL, SL+ I Sled advance signal input pin from microprocessor.
32, 33 JP, JP+ I Tracking jump signal input pin from DSP.
34 TGL I Tracking gain control signal input from DSP. Low gain when TGL = H.
35 TOFF I Tracking off control signal input pin from DSP. Off when TOFF = H.
28
Pin No. Pin Name I/O Description
36 TES O Pin from which TES signal is output to DSP.
"High Frequency Level" is used to judge whether the main beam position is on top of
37 HFL O
bit or on top of mirror.
38 SLOF I Sled servo off control input pin.
39, 40 CV, CV+ I CLV error signal input pin from DSP.
41 RFSM O RF output pin.
RF gain setting and EFM signal 3T compensation constant setting pin together with
42 RFS I
RFSM pin.
"Slice Level Control" is the output pin which controls the RF signal data slice level by
43 SLC O
DSP.
44 SLI I Input pin which control the data slice level by the DSP.
45 DGND -- Digital system GND.
46 FSC O Output pin to which external focus search smoothing capacitor is connected.
47 TBC I "Tracking Balance Control" EF balance variable range setting pin.
48 NC -- No connection.
49 DEF O Disc defect detector output pin.
50 CLK I Reference clock input pin. 4.23 MHz of the DSP is input.
51 CL I Microprocessor command clock input pin.
52 DAT I Microprocessor command data input pin.
53 CE I Microprocessor command chip enable input pin.
54 DRF O "Detect RF" RF level detector output.
55 FSS I "Focus Search Select" focus search mode (± search/+ search) select pin.
56 VCC2 -- Servo system and digital system Vcc pin.
57 REFI -- Pin to which external bypass capacitor for reference voltage is connected.
58 VR O Reference voltage output pin.
59 LF2 I Disc defect detector time constant setting pin.
60 PH1 I Pin to which external capacitor for RF signal peak holding is connected.
61 BH1 I Pin to which external capacitor for RF signal bottom holding is connected.
62 LDD O APC circuit output pin.
63 LDS I APC circuit input pin.
64 VCC1 -- RF system Vcc pin.
29
IC, LC78622ED
Pin No. Pin Name I/O Description
1 DEFI I Defect sense signal (DEF) input pin. (Connect to 0V when not used).
2 TAI I Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.
3 PDO O Phase comparator output pin to control external VCO.
4 VVSS -- GND pin for built-in VCO. Be sure to connect to 0V.
For PLL.
5 ISET I Pin to which external resistor adjusting the PD0 output current.
6 VVDD -- Power supply pin for built-in VCO.
7 FR I Pin for VCO frequency range adjustment.
8 VSS -- Digital system GND. Be sure to connect to 0V.
9 EFMO O EFM signal output pin.
For slice level control.
10 EFMIN I EFM signal input pin.
11 T2 I Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.
12, 13 CLV+, CLK- O Disc motor control output. Three level output is possible using command.
___ Rough servo or phase control automatic selection monitoring output pin. Rough servo
14 V/P O
at H. Phase servo at L.
15 HFL I Track detect signal input pin. Schmidt input.
16 TES I Tracking error signal input pin. Schmidt input.
17 TOFF O Tracking OFF output pin.
18 TGL O Tracking gain selection output pin. Gain boost at L.
19, 20 JP+, JP- O Track jump control signal output pin. Three level output is possible using command.
21 PCK O EFM data playback clock monitoring pin 4.3218 MHz when phase is locked in.
Sync signal detection output pin. H when the sync signal which is detected from EFM
22 FSEQ O
signal and thesync signal which is internally generated agree.
23 VDD -- Digital system power supply pin.
24 SL+ O Moves the sled to outer circumference.
25 SL- O Moves the sled to inner circumference.
26 -- -- Not connected.
27 PUIN I CD pickup inner switch detection.
28 RW O Read, wright signal.
29 EMPH O De-emphasis monitor output pin. De-emphasis disc is being played back at H.
30 C2F O C2 flag output pin.
31 DOUT O DIGITAL OUT output pin. (EIAJ format).
32, 33 T3, T4 I Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.
34 N.C. -- Not used. Set the pin to open.
35 MUTEL O L-channel mute output pin.
36 LVDD -- L-channel power supply pin.
L-channel 1-bit DAC.
37 LCHO O L-channel output pin.
38 LVSS -- L-channel GND. Be sure to connect to 0V.
39 RVSS -- R-channel GND. Be sure to connect to 0V.
40 RCHO O R-channel output pin.
R-channel 1-bit DAC.
41 RVDD -- R-channel power supply pin.
42 MUTER O R-channel mute output pin.
30
Pin No. Pin Name I/O Description
43 XVDD -- Crystal oscillator power supply pin.
44 XOUT O
Pin to which external 16.9344 MHz crystal oscillator is connected.
45 XIN I
46 XVSS -- Crystal oscillator GND pin. Be sure to connect to 0V.
47 SBSY O Subcode block sync signal output pin.
48 EFLG O C1, C2, single and dual correction monitoring pin.
49 PW O Subcode P, Q, R, S, T, U and W output pin.
50 SFSY O Subcode frame sync signal output pin. Falls down when subcode enters standby.
Subcode read clock input pin. Schmidt input. (Be sure to connected to 0V when not
51 SBCK I
in use.)
Pin outputting the 7.35 kHz sync signal which is generated by dividing frequency of
52 FSX O
crystal oscillator.
53 WRQ O Subcode Q output standby output pin.
54 RWC I Read/write control input pin. Schmidt input.
55 SQOUT O Subcode Q output pin.
56 COIN I Command input pin from microprocessor.
___________
57 CQCK I Command input read clock or subcode read input clock from SQOUT pin
58 RES I LC78622 reset input pin. Set this pin to L once when the main power is turned on.
59 T11 O Test signal output pin. Use this pin as open (normally L output).
60 16M O 16.9344 MHz output pin.
61 4.2M O 4.2336 MHz output pin.
62 T5 I Test signal input pin with built-in pull-down resistor. Be sure to connect to 0V.
______ Chip select signal input pin with built-in pull-down resistor. Be sure to connect to 0V
63 CS I
while it is not controlling.
64 T1 I Test signal input pin without built-in pull-down resistor. Be sure to connect to 0V.
31
IC, LC867132V-5P07
Pin No. Pin Name I/O Description
1 O-RMC/CE O CD read/write control output.
2 O-DATA O Data output to sound processor IC (M62495FP).
3 O-CLK O Clock output to sound processor IC (M62495FP).
4 NC -- Not Connected.
5 O-CLK SFT O Clock shift output of the microcomputer.
6 I-HOLD I Hold status detection.
7 I-RST I Microcomputer reset.
8 XT1 (IN) I
Connected to 32.768kHz crystal oscillator.
9 XT2 (OUT) O
10 VSS1 -- GND.
11 CF1 (IN) I
Connected to 5.76MHz Ceramic Filter.
12 CF2 (OUT) O
13 VDD1 -- Power supply for microcomputer (+5V).
14 I-FM ST I FM STEREO status input.
15 I-KEYO I KEY AD input.
16 I-CD SW I CD DOOR SW status detection input.
17 I-KEY1 I KEY AD input.
18 I-MOTOR I DECK MECHA MOTOR status input.
19 I-REC I REC status input.
20 I-FM/AM (NC) I FM, AM status input. (Not connected)
21 I-TU DO I Data input from tuner PLL.
22 O-BASS LED (NC) O BASS LED ON/OFF control output. (Not connected)
23 O-QS LED O Q-Sound LED ON/OFF control output.
24 NC -- Not connected.
25 O-INT O INT DIODE MATRIX detection output.
26 I-DRF I CD RF level detection input.
27 I-WRQ I CD sub-code Q standby input.
28 I-REMO I Remote control input.
29 SO/PAO (NC) O LCD segment output and initial settings output. (SW) (Not connected)
30 S1/PA1 (NC) O LCD segment output and initial settings output. (LW) (Not connected)
31 S2/PA2 O LCD segment output and initial settings output. (MW 10K)
32 S3/PA3 (NC) O LCD segment output and initial settings output. (FM WIDE) (Not connected)
33 S4/PA4 (NC) O LCD segment output and initial settings output. (OIRT) (Not connected)
34 S5/PA5 (NC) O LCD segment output and initial settings output. (SW2) (Not connected)
35 S6/PA6 O LCD segment output and initial settings output. (SYN)
36 S7/PA7 O
LCD segment output and initial settings output.
37-40 S8-S11 O
41 VDD3 -- Power supply for microcomputer (+5V).
42 VSS3 -- GND.
43-50 S12-S19 O LCD segment output.
51-54 S20-S23 (NC) O LCD segment output. (Not Connected)
32
Pin No. Pin Name I/O Description
55 O-CD LED O LED ON/OFF control output for CD functions.
56 O-TU LED O LED ON/OFF control output for TU functions.
57 O-TA LED (NC) O LED ON/OFF control output for TAPE functions. (Not Connected)
58 O-ROCK LED O LED ON/OFF control output for ROCK.
59 O-POP LED O LED ON/OFF control output for POP.
60 O-JAZZ LED O LED ON/OFF control output for JAZZ.
61 NC --
62 I-CD TEST (NC) I Not connected.
63 I-TU TEST (NC) I
64-66 COM0-COM2 O LCD common output.
67 NC -- Not connected.
68 VSS2 -- GND.
69 VDD2 -- Power supply for microcomputer (+5V).
70 O-CD ON O CD PWR control output.
71 O-TU ON O TU PWR control output.
72 O-P.CONT O Power supply control output.
73 NC -- Not connected
74 O-MUTE O Main mute output.
75 O-FM MONO (NC) O FM force control MONO output. (Not connected)
76 O-BEAT CONT O BEAT switch over output.
77 O-QSOUND O Q-Sound ON/OFF output.
78 O-COIN O CD command output.
79 I-SQOUT I CD sub-code Q input.
80 O-CQCK O CLK for CD commands/sub-codes.
33
MECHANICAL PARTS LIST 1/1
REF. NO PART NO. KANRI DESCRIPTION REF. NO PART NO. KANRI DESCRIPTION
NO. NO.
1 8A-CH2-016-010 LENS,RC 31 88-CD5-203-010 HLDR,LOCK 2N
2 8A-CH2-012-010 COVER, FR 32 8A-CH2-621-010 FF-CABLE,16P 1.0
3 8A-CH2-030-010 FRAME,NET ASSY 33 8A-CH2-622-010 FF-CABLE,5P 1.25
4 8A-CH2-024-010 CAP, JOG 34 8A-CH2-623-010 FF-CABLE,6P 1.25
5 8A-CH2-023-010 KNOB,RTRY JOG 35 8A-CH2-014-010 COVER, LCD
6 8A-CH2-013-010 PANEL,CD 36 8A-CH2-010-010 HANDL,ARM
7 8A-CH2-060-010 CABI,FR U 37 8A-CH2-011-010 COVER, HANDL
8 8A-CH4-682-010 SPKR,10- 7OHM 38 86-CT4-616-010 ANT,ROD
9 88-CD5-211-010 HLDR,SPKR 39 8A-CH2-007-010 LID,BATT
10 8A-CH2-205-010 HLDR,TU 40 88-CD5-206-010 SPR-C,BATT LINK
11 8A-CH2-018-010 BTN,TIMER 41 8A-CH2-035-010 PLATE,AC
12 8A-CH2-025-010 BTN,POWER 42 8A-CH2-002-010 CABI,REAR
13 8A-CH2-022-010 LENS,CD ! 43 87-A60-177-010 JACK,AC U W/SW
14 8A-CH2-021-0