Installing-Hard-Drive-2750.pdf part of apple Installing-Hard-Drive-2750 Installing-Hard-Drive-2750.pdf, apple Apple Time Capsule Installing-Hard-Drive-2750.pdf text manual preview

Text preview for : Installing-Hard-Drive-2750.pdf part of apple Installing-Hard-Drive-2750 apple Apple Time Capsule Installing-Hard-Drive-2750.pdf

Back to : Installing-Hard-Drive-275 | Home

Replacing Apple Time Capsule HDD

Replacing Apple Time Capsule HDD
Tools used in this guide Parts relevant to this guide
Heat gun or hair dryer Hard Drive SATA
Phillips #00 Screwdriver
Spudger

Step 1 - disassembly Lower Case
Place the unit bottom up on your work surface. Use a
cloth or similar to protect it from scratches.
Use a heat gun, hair dryer or similar in order to weaken
the adhesives in the tape that hold it in place.
Start in a corner, it can be tricky to get a good grip
at first.
Progress slowly not to tear the tape, but do not
over heat the unit.
You will tear some of the tape, don't worry to
much about it. It will still hold in place.