TEK VM700A Programmer Reference.pdf part of Tektronix TEK VM700A Programmer Reference TEK VM700A Programmer Reference.pdf, Tektronix TEK VM700A Programmer Reference.pdf text manual preview

Text preview for : TEK VM700A Programmer Reference.pdf part of Tektronix TEK VM700A Programmer Reference Tektronix TEK VM700A Programmer Reference.pdf

Back to : TEK VM700A Programmer Ref | Home

Reference Manual

VM700A Video Measurement Set
Programmer's Reference Manual
070-8550-01
"N" Group: Video Wander Configuration (NTSC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-70A
"O" Group: Video Wander Configuration (PAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-70B
Option 22 (Video Wander) Results File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-27
VM700A Programmer's Reference Manual GET/SET Keywords

"N" Group: Video Wander Configuration (NTSC)
"N" keywords report on or set the values of the Drift Rate and Frequency Offset
application configuration parameters on an NTSC-standard VM700T.
All Get and Set commands used with the "N" keywords are channel-specific.
Get commands used with the "N" keywords have the following form:
get
Set commands used with the "N" keywords have the following form:
set []
Set commands used with "N" group keywords have either one or two arguments,
depending on the keyword. Table 1