Text preview for : 5990-9836EN FieldFox Handheld Analyzers - Configuration Guide c20140902 [20].pdf part of Agilent 5990-9836EN FieldFox Handheld Analyzers - Configuration Guide c20140902 [20] Agilent 5990-9836EN FieldFox Handheld Analyzers - Configuration Guide c20140902 [20].pdf
Back to : 5990-9836EN FieldFox Hand | Home
Keysight
FieldFox Handheld Analyzers
4/6.5/9/14/18/26.5 GHz
Coniguration
Guide
N9913A
N9914A
N9915A
N9916A
N9917A
N9918A
N9925A
N9926A
N9927A
N9928A
N9935A
N9936A
N9937A
N9938A
The FieldFox Analyzer Family
This coniguration guide describes conigurations, options, and accessories for the FieldFox family of
portable analyzers. This guide should be used in conjunction with the technical overviews and data
sheets for a complete description of the analyzers.
The table below shows a comparison of the functions available in the FieldFox family of analyzers.
FieldFox RF and FieldFox microwave FieldFox microwave
microwave analyzers vector network spectrum analyzers
(Combination or combo analyzers
analyzers)
Functionality N9913A, N9914A N9925A, N9926A N9935A, N9936A
N9915A, N9916A N9927A, N9928A N9937A, N9938A
N9917A, N9918A
Cable and antenna analyzer Yes Yes No 1
(CAT)
Vector network analyzer Yes Yes No
(VNA)
Spectrum analyzer (SA) Yes No Yes
Built-in power meter Yes Yes Yes
Vector voltmeter (VVM) Yes Yes No
1. On the N991xA combination analyzers, order Options 233 and 210 to obtain a tracking generator with the spectrum
analyzer. There is no Option 220 on the N991xA analyzers. To obtain tracking generator capability, you need Options
233 and 210. Option 233 provides the spectrum analyzer capability and Option 210 the "tracking" capability.
03 | Keysight | FieldFox Handheld Analyzers - Coniguration Guide
The FieldFox Analyzer Family (continued)
The table below shows a comparison of the functions available in the FieldFox family of analyzers.
Option Description N991x Combo N992x VNA N993x SA
233 Spectrum analyzer -- Base model
235 Preampliier --
220 Tracking generator Note 1 --
236 Interference analyzer and spectrogram --
238 Spectrum analyzer time gating --
305 Cable and antenna analyzer Base model Note 2
320 Relection measurements (RL, VSWR) Note 3 Note 4
210 VNA transmission/relection Base model --
211 VNA full 2-port S-parameters --
212 Mixed-mode S-parameters --
010 VNA time domain --
112 QuickCal --
308 Vector voltmeter --
307 Built-in GPS receiver
302 USB power sensor support
208 USB power sensor measurements versus
frequency
309 DC bias variable-voltage source
310 Built-in power meter
330 Pulse measurements
030 Remote control capability
Notes:
Base model means that the functionality listed is the primary function of that instrument. For example, on the N991xA combo analyzers, cable and
antenna analysis is the standard function included with every N991xA.
1. On the N991xA combination analyzers, order Options 233 and 210 to obtain a tracking generator with the spectrum analyzer. There is no Option 220 on
the N991xA analyzers. To obtain tracking generator capability, you need Options 233 and 210. Option 233 provides the spectrum analyzer capability and
Option 210 the "tracking" capability.
2. Option 305 cable and antenna analyzer, is not available on the N993xA. However, a subset of cable and antenna analyzer measurements return loss and
VSWR, is available as Option 320.
3. Option 320 is not applicable to N991xA. The relection measurements of return loss and VSWR are included with every N991xA. So there is no need for an
Option 320 on the combo analyzers.
4. Option 320 is not applicable to N992xA. The relection measurements of return loss and VSWR are included with every N992xA. So there is no need for an
Option 320 on the N992xA.
04 | Keysight | FieldFox Handheld Analyzers - Coniguration Guide
FieldFox Microwave Combination Analyzers
Step 1. Select the model that provides the desired frequency range.
Model Description CAT and VNA frequency SA frequency 1 Test port connectors
N9913A 4 GHz FieldFox RF analyzer 30 kHz to 4 GHz 100 kHz to 4 GHz Type-N (f)
N9914A 6.5 GHz FieldFox RF analyzer 30 kHz to 6.5 GHz 100 kHz to 6.5 GHz Type-N (f)
N9915A 9 GHz FieldFox microwave analyzer 30 kHz to 9 GHz 100 kHz to 9 GHz Type-N (f)
N9916A 14 GHz FieldFox microwave analyzer 30 kHz to 14 GHz 100 kHz to 14 GHz Type-N (f)
N9917A 18 GHz FieldFox microwave analyzer 30 kHz to 18 GHz 100 kHz to 18 GHz Type-N (f)
N9918A 26.5 GHz FieldFox microwave analyzer 30 kHz to 26.5 GHz 100 kHz to 26.5 GHz 3.5 mm (m)
All N991xA FieldFox combo analyzers include the cable and antenna analyzer as the base model. Additional functionality such as
spectrum analysis or network analysis can be added using the options listed below.
The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable, Quick Reference
Guide and User's Guide.
Step 2. Select optional measurement capabilities. Note that any of the options can easily be added as software upgrades in the future.
Option Description Prerequisite options/notes
N991xA-233 Spectrum analyzer