Text preview for : ht_r330_disassembly_for_troubleshooting_205.pdf part of ONKYO ht r330 disassembly for troubleshooting 205 ONKYO Audio HT-R330 ht_r330_disassembly_for_troubleshooting_205.pdf
Back to : ht_r330_disassembly_for_t | Home
CONFIDENTIAL
Technical Tip
18 Park Way, Upper Saddle River, NJ 07458
Date: February 16, 2006
_____________________________________________________________
Model: HT-R330
Subject: Disassembly Troubleshooting tip
Symptom: How can you access the Main board to troubleshoot the set?
Solution: Remove the top cover from the unit. Using needlenose pliers unclip the three
plastic clips securing the Main board and Power supply boards to the bottom chassis.
Next, remove the two screws securing the bottom Chassis plate to the Front panel.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.
Remove the screws (location shown here) that secure the boards to the bottom Chassis
plate. See the attached picture.
Note: Do not remove the Front panel or the Back panel, they are needed to stand the unit
on its side while troubleshooting.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.
After the mounting screws have been removed, carefully place the set on its side with the
Power Transformer down toward your work surface. Double check the bottom panel to
verify all of the screws have been removed. Remove the bottom chassis plate to expose
the PC boards. You can now easily remove the bottom plate by pivoting the panel out
from the rear panel and away from the boards. Once the panel has cleared the boards you
can place it on the side until the set is ready for re-assembly.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.
The set is now ready for troubleshooting!
When you have completed troubleshooting the set reverse the disassembly steps to re-
assemble the unit.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.