Text preview for : Installing-Power-Supply-3217.pdf part of apple Installing-Power-Supply-3217 apple Apple Time Capsule Installing-Power-Supply-3217.pdf
Back to : Installing-Power-Supply-3 | Home
Installing Apple Time Capsule Power Supply
Installing Apple Time Capsule Power Supply
Tools used in this guide Parts relevant to this guide
Heat gun or hair dryer Time Capsule Power Supply
Phillips #00 Screwdriver
Spudger
Step 1 - disassembly Lower Case
Place the unit bottom up on your work surface. Use a
cloth or similar to protect it from scratches.
Use a heat gun, hair dryer or similar in order to weaken
the adhesives in the tape that hold it in place.
Start in a corner, it can be tricky to get a good grip
at first.
Progress slowly not to tear the tape,
but do not over heat the unit.
You will tear some of the tape, don't
worry too much about it. It will still hold
in place fairly well.