Text preview for : envelope_feeder.pdf part of apple envelope feeder apple misc envelope_feeder.pdf
Back to : envelope_feeder.pdf | Home
K Service Source
Envelope Feeder
LaserWriter Pro 600/630 Envelope Feeder
LaserWriter 16/600 PS Envelope Feeder
K Service Source
Basics
Envelope Feeder
Basics About This Manual - 1
About This
Manual
This manual covers the Take
Apart, Additional Proced-
ures, and Adjustments for
the sheet feeder. Refer to
the main printer manuals
for all other information.
Envelope Feeder
Basics Compatibility - 2
Compatibility
The LaserWriter Pro 600/630 envelope feeder is
compatible only with the Pro 600/630 printer. However,
you may use the LaserWriter 16/600 PS envelope feeder
with either the Pro 600/630 or 16/600 printers.
You can tell the two feeders apart in three distinct ways:
1 By carefully inspecting the pickup rollers and shafts:
The LaserWriter Pro 600/630 model has a two-piece
roller/shaft construction. The LaserWriter 16/600 PS
model has a one-piece roller/shaft construction.
Basics Compatibility - 3
2 By comparing controller board serial numbers: The
LaserWriter Pro 600/630 envelope feeder controller
board has the vendor number "RG5-0576" imprinted at
the end of the board. The LaserWriter 16/600 PS
envelope feeder controller board bears the number
"RG1-3437."
3 By comparing serial numbers: Numbers starting with
JXC00001 denote feeders for use only with the Pro
600/630. Numbers starting with LBK00001 denote
feeders for use on both generations of printer.
Basics Slip Torque Rollers - 4
Slip Torque
1/4"