Text preview for : 07_Disassembly Method.pdf part of Samsung 07 Disassembly Method Samsung Audio HT-P1200 HT-P1200 07_Disassembly Method.pdf
Back to : 07_Disassembly Method.pdf | Home
5. How to disassemble
1. Separate CABINET-REAR
(a) Unfasten 17 screw on REAR.
(b) Separate the wire that connected with
FAN and TUNER PACK from SMPS-PCB
and MAIN-PCB.
2. Separate MAIN-PCB
(a) Unfasten 6 screw on PCB.
(b) Separate 4 wire are shown from PCB.
Samsung Electronics 5-1
3. Separate SMPS-PCB
(a) Remove the SHIELD-HDMI.
(b) Unfasten 4 screw
and separate the SMPS-PCB.
4. Separate FRONT-PCB
(a) Unfasten 6 screw on FRONT-PCB.
(b) Separate 1 wire are shown and
then separate the FRONT-PCB.
5-2 Samsung Electronics
5. Separate LED-PCB and LENS
(a) Separate 2 hook staying fixed.
(b) Unfasten 1 screw are shown and
then separate the HOLDER-LENS.
6. Separate DVD-MECHA
(a) Unfasten 3 screw are shown and
then separate the HOLDER-MECHA.
7. Separate CABINET-FRONT
(a) Unfasten 8 screw are shown and
then separate the CABINET-FRONT.
(b) Separate 2 wire are connected.
Samsung Electronics 5-3
8. Separate MOTOR
(a) Unfasten 3 screw on HOLDER-GEAR-UP and
3 screw on HOLDER-GEAR-DOWN.
9. Separate SWITCH-LIFT PCB
(a) Separate SWITCH-LIFT-UP and
SWITCH-LIFT DOWN PCB are sticked on hook
from COVER-FRONT.
5-4 Samsung Electronics
* SUBW OOFER Disassemb l y
1. Separate CABINET-REAR
(a) Unfasten 12 screw on REAR.
2. Separate AMP SET
from SUBWOOFER
(a) Separate SUB-WOOFER signal wire
and FRONT LED3P wire.
Samsung Electronics 5-5
3. Separate MOLD CASE
(a) Unfasten 6 screw are shown on REAR.
(b) COMPLETE !
5-6 Samsung Electronics