Text preview for : STDV730.pdf part of Embest STDV730 Embest STDV730.pdf
Back to : STDV730.pdf | Home
Embest STDV730F Evaluation Board
- A Super-integrated Evaluation board for ST Microelectronic STR730FZ2T6
Microcontroller (STR730 series)
- RS232, CAN2.0, LCD, SPI, I2C, ADC, Jtag ...
- Plenty of software examples, all in source code
Embest STDV730F Evaluation Board
Description
The STR730F-Z2T6 is an ARM7TDMI Flash microcontrollers from STMicroelectronics with 256
Kbytes of flash, 16 Kbytes of RAM and powerful peripheral functions, including up 16-channel
10-bit ADC, 20 timers, 4xUARTs, 3xCANs, SPI, I2C, DMA, RTC, PWM, and 112 GPIO. It is of
the STR730F family which are ideal for embedded applications requiring a compact yet powerful
MCU, as well as versatile, scalable solutions such as user interfaces, factory automation systems
and appliances and features a single 5V power supply particularly suited to industrial
applications.
The STDV730F Board is a complete development platform based on high-performance
STR730F-Z2T6 microcontroller. The board integrates a 2x16 LCD, LEDs, UART, CAN interface,
buzzer, test buttons and Jtag interface to create a versatile stand-alone test platform. The board kit
1
is provided with plenty of example programs and a suite of software tools to help you quickly
startup your development and speed up your market time.
Hardware Specification
Dimensions: 126x118mm
Working temperature: -40~+85 Celsius
Processor: STR730F-Z2T6 with embedded 256KBytes of flash and 16KBytes of RAM
Power input: +5.0V/1A
CAN2.0 communication interface with CAN driver-chip
4 RS232 ports (UART0 and UART2 can be interconnected to each other for RS232
communication experiment)
3 Serial Peripheral Interfaces (SPI)
2 II-C interfaces
LCD interface (Supports 16x2 Character LCD or 128x64 Dot-matrix LCD)
7 LED indicator lights: one for power, others are general used
16 channel 10-bit ADC and 2 on-board regulators (ADC experiment)
1 buzzer (Jumper JP5 for enabling or disenabling the function)
1 Reset button
1 WAKE-UP button
5 general used buttons
A standard 20-pin Debug-JTAG connector
2
Interfaces and Jumpers Introduction
Interfaces: List below the introduction of the main interfaces
Interface Name Description
J1 & J2 UART1 & UART0 Serial port 1 & 0
J3 & J4 CAN1 & CAN0 CAN interface
J5 LCD LCD interface
J6 DC5V DC5V Power supply
J7 JTAG Jtag interface
Jumpers: List below the functions and settings of the main interfaces
Jumper Description Setting Setting explanation
Short-circuit Connected to enable buzzer to work
JP5 Buzzer Enable
Disconnection Disable buzzer
JP1 CAN matched Short-circuit Enable 120