Text preview for : MT-60PZ12V Service Manual.pdf part of LG MT-60PZ12V Service Manual LG Plasma MT-60PZ12V MT-60PZ12V Service Manual.pdf
Back to : MT-60PZ12V Service Manual | Home
website:http://biz.LGservice.com
e-mail:http://www.LGEservice.com/techsup.html
PLASMA MONITOR
SERVICE MANUAL
CHASSIS : NP-00KB
MODEL : MT/MZ-60PZ12/B
MODEL : MT/MZ-60PZ14/B
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CONTENTS
Contents ................................................................................................................. 2
Safety Precautions ............................................................................................3
Specifications ..................................................................................................... 4
Control Descriptions ........................................................................................ 5
Adjustment Instructions ............................................................................... 9
Trouble Shooting ............................................................................................... 11
Block Diagram .................................................................................................... 13
Exploded View .................................................................................................. 16
Exploded View Parts List ..............................................................................17
Replacement Parts List ................................................................................ 18
SVC. Sheet ................................................................................................................
- 2 -
SAFETY PRECAUTIONS
IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in
the Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to
prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
An lsolation Transformer should always be used during
the servicing of a receiver whose chassis is not isolated from Leakage Current Hot Check circuit
the AC power line. Use a transformer of adequate power rating
as this protects the technician from accidents resulting in
personal injury from electrical shocks.
AC Volt-meter
It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitary that may be
inadvertently introduced during the service operation.
Good Earth Ground
If any fuse (or Fusible Resistor) in this monitor is blown, replace such as WATER PIPE,
it with the specified. CONDUIT etc.
To Instrument's
0.15uF
exposed
When replacing a high wattage resistor (Oxide Metal Film METALLIC PARTS
Resistor, over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts. 1.5 Kohm/10W
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube.
Do not lift the Picture tube by it's Neck.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source,
connect an electrical jumper across the two AC plug prongs.
Place the AC switch in the on positioin, connect one lead of
ohm-meter to the AC plug prongs tied together and touch other
ohm-meter lead in turn to each exposed metallic parts such as
antenna terminals, phone jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1M and 5.2M.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC
voltmeter with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC
voltage measurements for each esposed metallic part. Any
voltage measured must not exceed 0.75 volt RMS which is
corresponds to 0.5mA.
In case any measurement is out of the limits sepcified, there is
- 3 -
SPECIFICATIONS
Note : Specification and others are subject to change without notice for improvement.
O Video receiving system: RGB Input(PC/DTV)
PAL PC
SECAM
NTSC-M REsolution H-Freq(hz) V-Freq(hz) Pixel clock Proposed
NTSC 4.43
640*350 31.469 70.09 70.09 EGA
O Input Voltage : AC 110~240V, 50/60Hz(MT-) 640*350 37.861 85.08 85.08 EGA
AC 200~240V, 50/60Hz(MZ-) 720*400 31.469 70.08 70.08 DOS
O Power consumption : Max 750W 720*400 37.927 85.03 85.03 DOS
Stand-By : 5W 640*480 31.469 59.94 59.94 VESA(VGA)
640*480 35.000 66.66 66.66 Macintosh
O PDP Module : PDP60WXDP4
640*480 37.861 72.80 72.80 VESA(VGA)
O Speaker Impedance : 8 ohm 640*480 37.500 75.00 75.00 VESA(VGA)
640*480 43.269 85.00 85.00 VESA(VGA)
O Feature : AV Input
Component Input 640*480 45.913 90.03 90.03 VESA(VGA)
RGB Input 640*480 53.011 100.04 100.04 VESA(VGA)
External SPK Out 640*480 64.062 120.00 120.00 VESA(VGA)
RGB/ Control Input
S-Video Input 800*600 35.156 56.25 56.25 VESA(SVGA)
800*600 37.879 60.31 60.31 VESA(SVGA)
O Funtion : Auto Picture 800*600 48.077 72.18 72.18 VESA(SVGA)
DASP
AVL 800*600 46.875 75.00 75.00 VESA(SVGA)
PIP 800*600 53.674 85.06 85.06 VESA(SVGA)
SSC 800*600 56.000 90.00 90.00 VESA(SVGA)
O External Interface 800*600 64.016 100.00 100.00 VESA(SVGA)
832*624 49.725 74.55 74.55 Macintosh
Item Min Typ Max Unit
1024*768 48.363 60.00 60.00 VESA(XGA)
Video Input Level 0.9 1 1.1 Vpp
1024*768 56.476 70.06 70.06 VESA(XGA)
Video Input Frequency Response 5 Mhz
1024*768 60.023 75.02 75.02 VESA(XGA)
Video Input S/N 40 dB
1024*768 68.677 84.99 84.99 VESA(XGA)
S Video Input Level(Y) 0.85 1 1.15 Vpp
1280*724 52.400 69.98 88.87 HD70Hz(Just scan)
S Video Input Level(C-Burst) 0.143 0.286 Vpp
Audio Input Level 0.3 0.4 0.5 Vrms 1152*864 54.348 60.05 60.05 VESA(SXGA)
Audio Input Frequency Response 0.08 7 kHz 1152*864 63.995 70.01 70.01 VESA(SXGA)
Audio Input S/N 40 dB 1152*864 67.500 75.00 75.00 VESA(SXGA)
Audio Input Distortion 2 % 1152*864 77.487 85.05 85.05 VESA(SXGA)
Audio Input Dynamic Range 2 V 1152*870 68.681 75.06 75.06 VESA(SXGA)
Component Video Input Level 0.6 0.7 0.8 Vpp 1280*960 60.000 60.00 108.00 VESA(SXGA)
R/G/B Video Input Level 0.6 0.7 0.8 Vpp 1280*960 75.000 75.00 129.60 VESA(SXGA)
1280*1024 63.981 60.02 108.00 VESA(SXGA)
Component Video Input
1280*1024 79.976 75.02 135.00 VESA(SXGA)
REsolution H-Freq(Khz) V-Freq(hz) Proposed
DTV
640*480 15.73 60 SDTV,DVD 480I
640*480 15.63 50 SDTV,DVD 480I REsolution H-Freq(Khz) V-Freq(hz) Pixel clock Proposed
704*480 31.47 59.94 SDTV 480P 704*480 31.47 59.94 SDTV 480P
1280*720 45.00 60.00 HDTV 720P 1280*720 45.00 60.00 HDTV 720P
1280*720 44.96 59.94 HDTV 720P 1280*720 44.96 59.94 HDTV 720P
1920*1080 33.75 60.00 HDTV 1080I 1920*1080 33.75 60.00 HDTV 1080I
1920*1080 33.72 59.94 HDTV 1080I 1920*1080 33.72 59.94 HDTV 1080I
- 4 -
CONTROL DESCRIPTIONS
ON/OFF
INPUT
ON/OFF SELECT VOLUME
Main power button
Power standby indicator
Illuminates red in standby INPUT
Illuminates green when the SELECT VOLUME
Monitor is switched on
INPUT SELECT button
Sub power button
VOLUME (F,G) buttons
Remote control sensor
- 5 -
R AUDIO L (MONO) VIDEO Y PB PR R AUDIO L
(+) R ( ) ( ) L (+)
COMPONENT(480i/480p) RGB-PC INPUT
AV INPUT S-VIDEO (VGA/SVGA/XGA/SXGA) AUDIO INPUT RS-232C EXTERNAL SPEAKER (8) AC INPUT
(DVD INPUT)
R AUDIO L (MONO)VIDEO Y PB PR (+) R ( ) ( ) L (+)
R AUDIO L
COMPONENTI(480i/480p) RGB-PC INPUT
AV INPUT S-VIDEO (VGA/SVGA/XGA/SXGA) AUDIO INPUT RS-232C EXTERNAL SPEAKER 8 AC INPUT
(DVD INPUT)
POWER INPUT
AV INPUT / EXTERNAL SPEAKER SOCKET
COMPONENT (480i/480p) (8 ohm output) This Monitor operates
(DVD INPUT) SOCKETS on an AC mains supply,
the voltage is as indicat-
RGB-PC INPUT (VGA/SVGA/XGA/SXGA)/ ed as inside back cover
AUDIO INPUT/ of this manual. Never
RS-232C jacks apply DC power to the
Monitor.
- 6 -
Optional Extras
- Optional extras can be changed or modified for quality improvement without any notification new
optional extras can be added.
- Contract your dealer for buying these items.
AP-60WA20M series AP-60WA10 series
(Tilt wall mounting bracket) (Wall mounting bracket)
AP-60CA10 series AP-60FA10 series
(Ceiling mounting bracket) (Floor type stand)
AP-60DA10 series AP-60SA10 series
(Desktop stand) (Speakers)
AP-60SA10D series AP-60SA10F series
(Speaker stand) (Floor type speaker stand)
PR
PB
Y 80p)
T (480i/4
ONEN )
COMP D INPUT
VIDEO (DV
) O
L (MONO S-VIDE
R AUDIO
UT
AV INP
Video cables Audio cables AP-60EA21 (interface board)
- 7 -
Controls of the remote control
- When using the remote control aim it at the remote control sensor of the Monitor.
POWER
POWER
SLEEP INPUT SELECT
SLEEP INPUT SELECT
PSM SSM
PSM SSM
ARC STILL
ARC STILL
PIP TWIN PICTURE
PIP TWIN PICTURE
PIP INPUT POSITION
PIP INPUT POSITION
MENU MUTE
MENU MUTE
switches the sound on or off.
OK
VOL OK VOL
VOLUME (F, G)
D / E
selects a menu item.
INPUT SELECT button on the
remote control
POWER STOP P/STILL Each press of this button changes
the mode as below.
VCR BUTTONS REW PLAY FF
controls a LG video cassette Video Component
REC
recorder.
RGB
- 8 -
ADJUSTMENT INSTRUCTIONS
1. Application Object (3) Vs Adjustment
These instructions are applied to all of the PDP monitor, NP-