Text preview for : 4500_QVIC_TLS_RevA.pdf part of Keithley 4500 QVIC TLS RevA Keithley SCS 4500 4500_QVIC_TLS_RevA.pdf
Back to : 4500_QVIC_TLS_RevA.pdf | Home
4500-QIVC-TLS Test Lead Set
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
(440) 248-0400
www.keithley.com
Introduction
This document contains information on the 4500-QIVC-TLS Test Lead Set. These test lead sets are short, 6-inch cables used
to adapt from the male 15 dsub connectors on the 4500-CQIV-* cables (* = -0.5A, -1A, -2A, -3A for 0.5m, 1m, 2m or 3m
lengths) to alligator clips.
WARNING Take care not to contact exposed leads and terminals to avoid possible electric
shock.
Test lead designations
Table 1 lists connections for the test lead set. See Section 2 of the relevant QIVC card manual for complete connection
details.
Table 1
4500-QIVC test lead connector pinout
Connector
Wire color Signals
pin
1 Yellow V Bias HI
2 Orange Guard
3 Red I Source HI (with 11)
4 Red with stripe V Measure HI
5 Black I Source LO (with 13)
9 Brown V Bias LO
10 Brown with stripe V Bias Sense LO
11 Red I Source HI (with 3)
12 Black with stripe V Measure LO
13 Black I Source LO (with 5)
PA-886 Rev. A / 12-03
Figure 1
Test Lead Set
2