Text preview for : MDP_User_Group_News_V2N2_Sep83.pdf part of Tektronix MDP User Group News V2N2 Sep83 Tektronix MDP_User_Group MDP_User_Group_News_V2N2_Sep83.pdf
Back to : MDP_User_Group_News_V2N2_ | Home
TEK MICROCOMPUTER
DEVELOPMENT PRODUCTS
USER NEWSLETTER
VOLUME II , ISSUE NO . 2, SEPTEMBER , 1983
,...
I
USER CT 'i 1983
.GROUP
NEWS
COMMITTED TO EXCEUENCE
FORWARD
When the first issues of "USER GROUP NE\VS" were compiled there was a concern that there
would not be enough new material for the following issues in the span of three months. The
major problem, as it turns out, was which or many articles would be printed. Still one problem
remains! Almost all articles focus on the 8560. That is not really surprising because or the versa-
tility of the TNIX tool set; but we don't want to ignore the owners or 8002 and 8550 systems. If
you are an 8002 or 8550 user please take special note of the following:
CALL FOR ARTICLES
If you have application articles or just some good ideas, we would like to print them in the Appli-
cations Section and or place them in the new User Group Library Section of "USER GROUP
NE\VS". A submittal form is located at the end of the Applications Section (or your convenience.
ABOUT THE "USER GROUP LmRARY SECTION"
\Ve have collected a number of application programs since the last issue and we will make the
programs reported in the User Group Library available through your Tektronix Applications
Engineer. Separate volumes will be compiled for the 8002A, 8550, and TNIX. Each issue will
report updates to the library and a separate total listing will be produced annually.
John Owens
Editor
CONTENTS
PIlODUCT INFORMATION SECTION