Text preview for : 400PN_SB-SI_1207654737.pdf part of Samsung 400PN SB-SI 1207654737 Samsung Monitor Monitor 400P 400PN_SB-SI_1207654737.pdf
Back to : 400PN_SB-SI_1207654737.pd | Home
LCD-Monitor
Chassis Model
BE40TS 400Pn
BE40PS 400P
SERVICE Manual
TFT-LCD MONITOR Fashion Feature
VMB (Vertical Marketing Business) Model
MFM ( (Multi Function Monitor) :
Receives diverse support other than PC
(DVI, AV, S-video, Component)
Response Time 8ms PVA adopted
Sound function reinforced by adopting
Dolby Virtual, BBE
Picture quality enhanced by adopting
DNIe, Digital Noise Reduction
RS232 Remote Control
(MDC software provided)
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Samsung Electronics Co., Ltd. 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do,
Korea, 443-742
Any unauthorized use of Manual can be
Printed in Korea
punished under applicable International P/N : BN82-
and/or domestic law. URL : http://itself.sec.samsung.co.kr/
3 Operating Installations and Installation
3 Operating Installations and Installation
3-1 Front
1. MENU 6. PIP
2. Navigate button (Up-Down button) 7. Power button
3. Adjust button (Left-Right button)/Volume button 8. Power indicator
4. ENTER 9. Remote Control Sensor
5. SOURCE
1. MENU
-Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment
menu.
2. Navigate button (Up-Down button)
-Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels.
3. Adjust button (Left-Right button)/Volume button
-Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.
4. ENTER
-Activates a highlighted menu item.
5. SOURCE
-Switches from PC mode to Video mode.
Changing the source is allowed only in external devices that are connected to the monitor at the time.
To switch Screen modes:
[PC] [BNC] [DVI] [AV] [S-Video] [Component] [MagicNet]
3-1
3 Operating Installations and Installation
6. PIP
-Push the PIP button to turn PIP screen On/Off.
More than one PIP couldn't be overlapped on screen as BNC and the component use the same terminal.
PC / DVI
: AV / S-Video / Component Mode
BNC
: AV / S-Video Mode
AV / S-Video
: PC / BNC / DVI Mode
Component
: PC / DVI Mode
7. Power button
-Use this button to turn the monitor on and off.
8. Power indicator
-Power Indicator shows PowerSaver mode by green blinking.
9. Remote Control Sensor
-Aim the remote control towards this spot on the Monitor.
3-1-1 Rear
The monitor's rear configuration may vary slightly depending on the monitor model.
1. POWER S/W
2. POWER IN
3-2
3 Operating Installations and Installation
3. RS232C OUT/IN(RS232C Serial Port): MDC(Multiple Device Control) Program Port
4. DVI IN(HDCP) (PC Video Connection Terminal) : Using DVI Cable (DVI-D to DVI-D), DVI mode(Digital PC)
5. PC IN(RGB) (PC Video Connection Terminal) : Using D-Sub Cable (15 pin D-Sub), PC mode(Analog PC)
6. PC/DVI/BNC AUDIO IN (PC/DVI/BNC Audio Connection Terminal (Input))
3-3
7. COMPONENT AUDIO IN [L-AUDIO-R]
(Component Audio Connection Terminal (Input))
8. BNC/COMPONENT OUT
(BNC/Component Connection Terminal (Output))
- BNC (Analog PC) Connection : connecting R, G, B,
H, V port
- Component Connection : connecting PR, Y,
Pb port
9. BNC/Component IN
(BNC/Component Connection Terminal (Input))
3-4
3 Operating Installations and Installation
10. AV AUDIO IN [L-AUDIO-R]
(Monitor Audio Connection Terminal (Input))
11. AV OUT [VIDEO](VIDEO Connection Terminal) :
AV mode (Output)
12. AV IN [VIDEO](VIDEO Connection Terminal)
(Input)
13. AV OUT [S-Video](S-Video Connection Terminal):
S-Video mode (Output)
14. AV IN [S-Video](S-Video Connection Terminal)
(Input)
15. EXT SPEAKER(8 ) (EXT Speaker Connection
Terminal)
16. MONITOR [L-AUDIO-R] (Monitor Audio Connection
Terminal (Output))
- MONITOR OUT is the terminal for sound output of
PC, DVI or BNC.
3-5
3 Operating Installations and Installation
17. LAN (LAN Connection Terminal)
(MS Internet Explorer)
18. USB (USB Connection Terminal)
(Keyboard / Mouse, Mass Storage Device Compatible.)
19. DIGITAL AUDIO OUT (Digital Audio Connection Terminal)
OPTICAL PORT:
Supports incoming or outgoing digital audio data in SPDIF.
Uses light instead of flexible current for transferring data.
The red light is not a laser light and is not harmful to the human body.
However, note that you should not touch the cable ends as dirt or foreign
substances from your fingers could interfere with the optical connections.
3-6
3 Operating Installations and Installation
3-1-2 Remote Control
1. ON / OFF
Use this button for turn the monitor on and off.
2. MAGICNET
MagicNet Quick Launch Button.
3. MDC
MDC Quick Launch Button.
4. LOCK
Sets the Lock Function.
5. MagicNet buttons
- Used for MagicNet.
Alphanumeric: Used to enter the Internet address.
DEL : Functions as the backspace.
SYMBOL : Used to enter the symbols. (.O_-:/)
ENTER : Used to enter values.
6. +100
Press to select channels over 100.
For example, to select channel 121, press "+100",
then press "2" and "1".
- This fuctions does not work for this monitor.
7. VOL
Also adjusts the audio volume.
8. MUTE
Pauses (mutes) the audio output temporarily.
Displayed on the lower left corner of the screen.
The audio resumes if MUTE or - VOL + is pressed
in the Mute mode.
9. AUTO
Adjusts the screen display automatically.
If you change resolution in the control panel, Auto
function will be executed.
10. MENU
Use this button to open the on-screen menu and
exit from the menu screen or close screen
adjustment menu.
11. ENTER
Activate a highlighted menu item.
12. PRE-CH
This button is used to return to the immediately
previous channel.
- This fuctions does not work for this monitor.
13. CH/PAGE
Selects channels or page.
- This fuctions does not work for this monitor.
3-7
14. SOURCE 21. MTS
Push the button, selects the Video source hanges. You can select the MTS (Multichannel Television
15. INFO Stereo) mode.
Current picture information displays on the
upper left corner of the screen.
16. EXIT 22. PIP
Exits from the menu screen. Every time you push the button, activate a PIP
17. Up-Down Left-Right buttons screen.
Moves from one menu item to another 23. SOURCE
horizontally, vertically or adjusts selected menu The PIP window's signal source changes.
values. 24. SIZE
18. P.MODE (M/B) You can switch the Picture Size.
When you press this button, current picture 25. SWAP
mode is displayed on the lower center of the Swapping the contents of the PIP and main
screen. image.
The image in the PIP window will appear on the
AV / S-Video / Component : P.MODE main screen, and the main screen image will
The Monitor has four automatic picture settings appear in the PIP window.
that are preset at the factory. 26.
Then push button again to circle through avail Rewind
able preconfigured modes. 27.
( Dynamic Standard Movie Custom ) Stop
28.
PC / DVI Mode : M/B ( MagicBright ) Play/Pause
MagicBright