Text preview for : Desensamble & Reensamble.pdf part of Samsung Desensamble & Reensamble Samsung TV KSBE chassis Desensamble & Reensamble.pdf
Back to : Desensamble & Reensamble. | Home
Disassembly & Reassembly
3. Disassembly&Reassembly
3-1 OverallDisassembly&Reassembly
3-1-1 DisassemblingtheCabinet
Part Name Description Description Photo
Back Remove the 9 screws fixing the Back
Cover Cover & Terminal Board. : RH, +, M4,
L15,ZPC(BLK), SWRCH18A
Tap the Back Cover 2 or 3 times and pull
the cover and remove it.
Since there is a danger of injury from
the remaining current and of damaging
the product due to static electricity,
make sure to remove the power
cord and wait for a moment so that
the remaining current is discharged
completely before disassembling the
product.
Samsung Electronics 3-1
Disassembly & Reassembly
3-1-2 DisassemblingtheCRTandChassis
Part Name Description Description Photo
Chassis Separate the Ass'y Holder chassis from
Holder the Front Cabinet.
Pull the Holder Chassis while pushing
the catch up.
you pull it with excessive power, it may
If
cause damage to the catch or connector.
Therefore, pull it until the catch is out of Pull the chassis while pushing the
clip fixing the Front Cabinet and
the hole. the Holder Chassis.
Separate the CRT connection, the TBC
wire,and the the speaker connection.
Since there is a hinge fixing the Wire
Connector and Connector Header, if
the wire is pulled with excessive power,
it may damage the catch or connector.
Therefore, pull it only after pressing the Pull the chassis while pushing the
clip fixing the Front Cabinet and
hinge down completely. Front Cabinet and
Pull the chassis while pushing the
clip fixing the
the Holder Chassis.
the Holder Chassis.
Separate the D-Coil, DY-Cable and
power cord from the Front Cabinet and
Main Board.
Separate the power cord, DY-Cable by
pushing the fixing catch to the side and
pulling the wire up.
Pull the chassis while pushing the
clip fixing the Front Cabinet and
the Holder Chassis.
Separate the CRT Ass'y from the CRT.
Separate the TBC wire, GND cables
from the CRT Ass'y sequentially.
3-2 Samsung Electronics
Disassembly & Reassembly
Part Name Description Description Photo
Chassis Separate the cable connecting the FBT
Holder and CRT from the CRT.
Since a high voltage current resides
inside the CRT, do not to touch the
CRT hole with metal or your body when
separating the cable.
3-1-3 DisassemblingtheCRTAss'y
Part Name Description Description Photo
CRT Separate the cables connecting the
Ass'y Main Ass'y and the CRT Ass'y.
Separate the wires from the FBT of the
Main Board and the CRT Ass'y.
To separate thick wire, pull the wires
while pressing the push-type clip at the
connector.
Take care when separating the wires
because pulling the wires by force may
damage the socket. In addition, separate
the wires on a flat and clean surface so
as to prevent scratching of the material Pull the wires while
pressing on the fixing clip.
and the PCB. Pull the wires while
pressing on the fixing clip.
Samsung Electronics 3-3
MEMO
3-4 Samsung Electronics