Text preview for : 13255-91082_CTU_Test_Module_Aug76.pdf part of HP 13255-91082 CTU Test Module Aug76 HP terminal 264x 13255-91082_CTU_Test_Module_Aug76.pdf



Back to : 13255-91082_CTU_Test_Modu | Home

HP 132"5
CTU TF'ST MoOUt,E

~anual Part No. 132S5-910P2
PRINTF:D

AUG-Ol-1fl

---------------------------------- - - '




DATA TERMINAL
TECHNICAL INFORMATION




----------------------------------1

HEWLETT~PACKARD


Printed in U.S.A.
13255 13255-91082/02
CTU Test Module Fev AUG-01-76




t.o INTROOUCTION.
The CTU Test ~odule provides a method of verifying the operation of
the CTU Transport Assembly. The CTU Tester PCA replaces the standard
top plane conn~ctor used with the CTU Module PCA's. The rTU Test
Modtlle provides optional manual control over tape motion and verifies
record/read operations. In addition, it provides a status display and
test pOint array (one test point for each siqnal line on the too
plane). Circuitry is provided to monitor tape speed accuracy and to
implement the stop-on-hole featnre which prevents cartridQe tape run-
off in OFF LINE (local) mode.

2.0 OPERATING P~RAMETERS.

A summary of operating oarameters for the CTU Test ~odule is contained
in tahles 1.0 throuQh 4.1.




Tahle 1.0 Physical Parameters

~~~-----------~-----~-~--~----~-~-----------------------------~-~--------------
-----------------------------~------------------~------------~------~- -~--------
Size (L x W x 0) Weight
Nomenclature +/-0.100 Inches (Pounds)
------------- ------------------------------
------~-~---- ----------~-~---~------~---~-- ------~~------~----~---
---~-~-----------~----- ---------
~-~-----~




rTU Tester peA 6.5 x 3.6 x 2.4 0.38




==============================================================================
Number ot B~ckplane Slots RPquired: NOT APPLICABIJE

------------~---------------~--~-------~------~~------ --------------------------
---------------------------------~-~------------------ --------------------------
HP 132"5
CTU TF'ST MonUt,E

~anual Part NO. 132S5-910~2


PRINTED
AUG-Ol-7f)




----.---------.----~..-..-.---~-------- ......---------...-.-----..... .... ....-.-----~--------.-...-.
~


NOTTCF.
The information contained in this document is suhject to chanqe
without not1.ce.
H~WLFTT-PACKaRD MAKES NO WARRANTY OF ANY KI~n WITH ~EGARn TO THIS
MATERIAL, INCLUDING, BUl NnT LTMITFD TO THF IMPLIED WARRANTIES OF
MERCHANTABILITY ANn FITNESS FOP A PARTICULAR PURPOSE. Hewlett-Packard
snaIl not be liable for prrors contained herein Or for incidental or
consponenttal damaqes in connection with the furnlshinq, perforfTIance,
or use of this material.
This document contains proprietary infOrmation which is protecterl by
copvrioht. All riqhts are reserved. No part of this document may be
~hotocopied or reproduced without the prior written consent Of Hewlett-
Packard Company.

..
----~ -------------~~---~-~~~----~-~---------------~-----~~----~------~-----~-.-
CoPvriqht c 1q76 by HF.WLETT-PACKARD CO~PAN~


NOTF: This document is part of t~e 264XX DATA TERMI~AL product
series Technical Information Package (HP 13255).
13255 13255-91082/02
CTU Test Module Fev AUG-OI-76




t.o INTROOUCTION.
The CTU Test ~odule provioes a method of verifyinq the operation of
the CTU Transport Assembly. The eTU Tester PCA replaces the standard
top plane conn~ctor used with the CTU Module PCA's. The CTU Test
Modtlle provides optional manual control over tape motion and verifies
record/read operations. In addition, it provides a status display and
test point array (one test pOint for p.ach siqnal line on the top
plane). Circuitry is provided to monitor tape speed accuracy and to
implement the stop-on-hole featnre which prevents cartridqe tape run-
off in OFF LINE (local) mode.

2.0 OPERATING P~RAMF.TERS.

A summary of operating narameters for the CTU Test ~odule Is contained
in tahlp.s 1.0 through 4.1.




Table 1.0 Physical Parameters

~~----~-------~-~---~----~----~---------------------------------~~-----~----~--
-~--~--------------------------------------------------------------~-
Part , Size (L x W x D)
----------
Weight
Number I Nomenclature I +/-0.100 Inches (Pounds)
=============1==============================1======================= ---------
I I
I I
, I
02~4n-~oo82 I rru Tester PCA I 6.5 x 3.& x 2.4 0.38
I I
I I
, I
, I
I I
I I
-----------------------------------~--~-------~----------~-~-------~----------
------------------------------------------------------ -------~----------------

Number ot B~ckplane Slots Required: NOT APPLICABI,E

~---------------------~-----~-------~----------------- -------------------------
-----------------------------------------------------~-----------~--------------
13255 13255-Ql082/03
eTn Test Module Pev ATTG-Ot-76




Table 2.0 Reliability and Environmental Information

=====:=====================================:=====================================

Efh'ironmental: ( X ) HP Class B ( ) Other:

i{p.stricti()ns: Type tested at product level


====::=========================================================================
Failure Patp.: 1.23q (percent per 1000 hours)

~----.---------~-~---~---------~-~---------~-~--~~-~-----~---------------~------
-----.------------------~-----------------------~------~----~-~---~-----~---~----




Table 3.0 Power SUpply and Clock Requirements - Measured
(At +1-5% Unless otherwise Specified)

-----.-~-----------------------------~-------------------------~-----------------
-~~--.------~---------~-~-------~-----------------~--- ---------------------------

+5 Volt Supoly +12 Volt Supply -12 Volt Supply -42 Volt Supply

~ 150 mA rnA rnA rnA

NnT Al:'Pt.ICAPLE NOT APPLICARLF
====::================================= =======================================
115 volts ac 220 volts ac
A A

NOT APPLICAl:n,E NOT APPLICABLE
----~-----------~-------~-------------------~---------~-----~-------~---------~
----.-----------------------~------~------------------ -------------------------

ClocI< f'reauency: ~Hz


~IOT APPL Ie ABl,E
~-~--~-----------~-----~-------------~---~-----------------------~----~---~-----
----~.------------------~-------~-----------~---~---~- ---------------------------
13'55 13255-91082/04
CTU Test Module Rev AUG-Ol-76




Table 4.0 Connector Information

================================================================================
connector Signal Signal
and Pin NO. I Name Description
==============1================
I
-------~-----~-----------------~-------------
~-------------------~-----------------------~-

P1, Pins - 1 I } Not
through -22 t } Used

-------------- ---------------- --~---~----~~-------~--~----------------------

P1, Pin - A LO Neqative True, Siqnal lln~s are fed
l,amp Un! t 0 directly throuqh the
~ead/Write peA from

- B Neqative True, the cartridqe drives.
Hole Unit 0
Detected LO and Ll turn on the
eject button lamp.
- C Ll Neqative True,
l,afrlp Un! t 1. HOLO and HOLt indicate
that a hole has been
detected on the associ-
ated drive.

- 0 ~OLl Neqative True,
Hole Unit t
Detected

- E Not used


- F Neqative True, Selects read or write
FeC'ord Enahle mode ot operation. LOW
l~vel selects record
mode. Hiqh levpl sel-
ects read mode.

- H lISO Unit Select 0 selects Unit 0 when
high and Unit 1 when
low.


--~-----~-~~----------------~~--------------~--------~--~-----------------------
-----------------------------~-----------------~---~--~--------~----------------
13255 13255-91082/05
CTU Test Module Fev AUG-Ol-76




Table 4.0 connector Information (Cont