Text preview for : 2sk1056.pdf part of Hitachi 2SK1056, 2SK1057, 2SK1058 Silicon N-Channel MOS FET
Back to : 2sk1056.pdf | Home
2SK1056, 2SK1057, 2SK1058
Silicon N-Channel MOS FET
ADE-208-1244 (Z) 1st. Edition Mar. 2001 Application
Low frequency power amplifier Complementary pair with 2SJ160, 2SJ161 and 2SJ162
Features
· · · · · · · Good frequency characteristic High speed switching Wide area of safe operation Enhancement-mode Good complementary characteristics Equipped with gate protection diodes Suitable for audio power amplifier
2SK1056, 2SK1057, 2SK1058
Outline
TO-3P
D G 1 2 3 1. Gate 2. Source (Flange) 3. Drain
S
Absolute Maximum Ratings (Ta = 25°C)
Item Drain to source voltage 2SK1056 2SK1057 2SK1058 Gate to source voltage Drain current Body to drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Note: 1. Value at TC = 25°C VGSS ID I DR Pch* Tch Tstg
1
Symbol VDSX
Ratings 120 140 160 ±15 7 7 100 150 55 to +150
Unit V
V A A W °C °C
2
2SK1056, 2SK1057, 2SK1058
Electrical Characteristics (Ta = 25°C)
Item Drain to source breakdown voltage Symbol Min 2SK1056 V(BR)DSX 2SK1057 2SK1058 Gate to source breakdown voltage Gate to source cutoff voltage Drain to source saturation voltage Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on time Turn-off time Note: 1. Pulse test V(BR)GSS VGS(off) VDS(sat) |yfs| Ciss Coss Crss t on t off 120 140 160 ±15 0.15 -- 0.7 -- -- -- -- -- -- -- -- 1.0 600 350 10 180 60 -- 1.45 12 1.4 -- -- -- -- -- V V V S pF pF pF ns ns VDD = 20 V, ID = 4 A, I G = ±100 µA, VDS = 0 I D = 100 mA, VDS = 10 V I D = 7 A, VGD = 0 *1 I D = 3 A, VDS = 10 V *1 VGS = 5 V, VDS = 10 V, f = 1 MHz Typ -- Max -- Unit V Test conditions I D = 10 mA, VGS = 10 V
3
2SK1056, 2SK1057, 2SK1058
Power vs. Temperature Derating 150 Channel Dissipation Pch (W) 20 Ta = 25°C ID max (Continuous) P PW 5 PW W = = 1 10 0 m = 0 s 1 m 1 s s sh 1 2 1 ot sh sh ot ot 1.0
C D O ra pe tio n (T C = 25 ) °C
Maximum Safe Operation Area
10
100
50
Drain Current ID (A)
0.5 2SK1056
0 50 100 Case Temperature TC (°C) 150
0.2 5
2SK1057 2SK1058
500 10 20 50 100 200 Drain to Source Voltage VDS (V)
Typical Output Characteristics 10 VGS = 10 V 9 8 7 6 4 5 4 2
Pch =
Typical Transfer Characteristics 1.0
2 5°C 25 75
8 Drain Current ID (A)
TC = 25°C Drain Current ID (A)
0.8
VDS = 10 V
6
0.6
0.4
3
100 W
0.2 2 1 0
0
10 20 40 50 30 Drain to Source Voltage VDS (V)
0
0.4 0.8 1.6 2.0 1.2 Gate to Source Voltage VGS (V)
4
T
C=
2SK1056, 2SK1057, 2SK1058
Drain to Source Saturation Voltage vs. Drain Current 10 Drain to Source Saturation Voltage VDS (on) (V) 5 VGD = 0 Drain to Source Voltage vs. Gate to Source Voltage 10 Drain to Source Voltage VDS (V) 8 TC = 25°C
25
°C
° 75
C
TC
2 1.0 0.5
C 5° 2 =
6 5A 4
2
0.2 0.1 0.1
2A ID = 1 A 6 2 4 8 10 Gate to Source Voltage VGS (V)
0.2
0.5 1.0 2 Drain Current ID (A)
5
10
0
Input Capacitance vs. Gate Source Voltage Forward Transfer Admittance yfs (S) 1000 Input Capacitance Ciss (pF) 3.0 1.0 0.3 0.1 0.03 0.01 0.003 10 k
Forward Transfer Admittance vs. Frequency
500
200 VDS = 10 V f = 1 MHz 100 0 2 4 6 8 10 Gate to Source Voltage VGS (V)
TC = 25°C VDS = 10 V ID = 2 A
30 k 100 k 300 k 1 M 3 M Frequency f (Hz)
10 M
5
2SK1056, 2SK1057, 2SK1058
Switching Time vs. Drain Current 500 Switching Time ton,toff (ns) 200 100 50 t off 20 10 5 0.1 t on
0.2
0.5 1.0 2 Drain Current ID (A)
5
10
Switching Time Test Circuit Output RL= 2 Input
PW = 50µs duty ratio =1%
50
20 V
Waveforms 90 % Input 10 % t on t off 10 % Output
90 %
6
2SK1056, 2SK1057, 2SK1058
Package Dimensions As of January, 2001
5.0 ± 0.3 15.6 ± 0.3 1.0
3.2 ± 0.2
4.8 ± 0.2 1.5
Unit: mm
0.5
14.9 ± 0.2
19.9 ± 0.2
1.6 1.4 Max 2.0 2.8 18.0 ± 0.5
1.0 ± 0.2
2.0
0.6 ± 0.2
3.6
0.9 1.0
5.45 ± 0.5
5.45 ± 0.5
Hitachi Code JEDEC EIAJ Mass (reference value) TO-3P -- Conforms 5.0 g
0.3
7
2SK1056, 2SK1057, 2SK1058
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica Europe Asia Japan
: : : :
http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk
For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160
Copyright © Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 2.0
8