Text preview for : 3470.pdf part of HP 3470 HP 3470.pdf
Back to : 3470.pdf | Home
HP Archive
This vintage Hewlett Packard document was
preserved and distributed by
www.hparchive.com
Please visit us on the web !
Scanned by on-line curator: Tony Gerbic
** For FREE Distribution Only ***
OPERATING AND SERVICE MANUAL
MEASUREMENT
SYSTEM
3470
HEWLETT~PACKARD
OPERATING AND SERVICE MANUAL
Binder Part 0.34740-90011
(Includes cover insert)
Manual Part No. 34740-90012 or 34750-90012
(Binder, System Introduction and Display Manual)
MODEL 3470
MEASUREMENT SYSTEM
IMPORTANT NOTICE
This instruction manual requires no change sheet. Any
change information has already been integrated into the
manual by page revisions. Revised pages have a revision
letter which can be found on the lower corner of the page.
Reference may also be made to Section VIII of each
manual where backdating information for earlier instru-
ments can be found.
Copyright Hewlett-Packard Company 1972
P.O. Box'30l, Loveland, Colorado 80537 U.S.A.
Printed: JUNE 1973
HEWLETT II PACKARD
CE RTI FI CATION
The Hewlett-Packard Company certifies that this instrument was
thoroughly tested and inspected and found to meet its published
specifi{!ttions when it was shipped from the factory. The Hewlett-
Packard Company further certifies that its calibration measure-
ments are traceable to the U.S. National Bureau of Standards to
the extent allowed by the Bureau's calibration facility.
WARRANTY AND ASSISTANCE
All Hewlett-Packard products are warranted against defects in
materials and workmanship. This warranty applies for one year
from the date of delivery, or, in the case of certain major compo-
nents listed in the operating manual, for the specified period. We
will repair or replace products which prove to be defective during
the warranty period provided they are returned to Hewlett-
Packard. No other warranty is expressed or implied. We are not
liable for consequential damages.
Service contracts or customer assistance agreements are available
for Hewlett-Packard products that require maintenance and re-
pair on-site.
For any assistance, contact your nearest Hewlett-Packard Sales and
Service Office. Addresses are provided at the back of this manual.
(
INTRODUCTION
The 3470 Measurement System is a series of modules that The BCD and/or Battery plug-on module may be added
may be plugged together to form several different between the display and function modules as desired.
measuring instruments, including both line powered and
battery powered versions. Refer to the Operating and Service Manual of the plug-on
module to be used with the display module for the
A mainframe display module is connected to a bottom operating instructions, incoming inspection, and adjustment
plug-on function module to form a complete instrument. procedures of the instrument as a whole.
DISPLAY MODULE
34750A
BATTERY MODULE BCD MODULE
34720A 34721B
DC VOLTMETER MODULE MULTIMETER MODULE
34701A 34702A
Possible Instrument Configurations
NAME _ COMPANY _
JOB TITLE _ ADDRESS _
ADDITIONAL COMMENT
- FIRST FOLD
- SECOND FOLD
FIRST CLASS
PERMIT NO. 37
LOVELAND,COLORADO
BUSINESS REPLY MAIL
NO POSTAGE STAMP NECESSARY IF MAILED IN UNITED STATES
POSTAGE WILL BE PAID BY
HEWLETT