Text preview for : 5991-3083EN N6841A RF Sensors QUICK Note 2_ Power Options - Data Sheet c20131028 [2].pdf part of Agilent 5991-3083EN N6841A RF Sensors QUICK Note 2 Power Options - Data Sheet c20131028 [2] Agilent 5991-3083EN N6841A RF Sensors QUICK Note 2_ Power Options - Data Sheet c20131028 [2].pdf
Back to : 5991-3083EN N6841A RF Sen | Home
N6841A RF Sensors
QUICK Note 2 | Power Options
Power Requirement Power Options
The Agilent RF Sensor was designed for Indoor use with AC power 30 meters. One extra power supply
low power consumption and outdoor available connector is provided with each Agilent
installations. Under most conditions, the RF Sensor. Detailed instructions for
unit draws 25 Watts but under heavy use, The N6841A-SP1 power supply will making the power cable are included in
can draw as much as 30 Watts. The input source the needed DC power to the RF
the N6841A Installation Guide (CLICK
Sensor with an input of either 110/120 or
voltage requirement is 15 VDC minimum All Programs > Agilent RF Sensor >
220/240 VDC at 50 or 60 Hz. This supply
to 24 VDC maximum. Applying more than is rated for use only where it and the RF Documents > Installation Guide).
28 VDC to the power connector may Sensor are both installed indoors in a dry