provieway565_service_maunal_193.pdf part of PROVIEW provieway565 service maunal 193 provieway565_service_maunal_193.pdf, PROVIEW Monitor provieway565_service_maunal

Text preview for : provieway565_service_maunal_193.pdf part of PROVIEW provieway565 service maunal 193 PROVIEW Monitor provieway565_service_maunal_193.pdf

Back to : provieway565_service_maun | Home

AY-565

Service Manual

Proview Electronics Co.,Ltd.

6F, No.1, Pau-Sheng Road., Yung-Ho City,
Taipei 234 , Taiwan , R.O.C.
Tel : (886-2) 2231-6789 , Fax :(886-2)2231-5678
1
TABLE OF CONTENTS
SERVICE WARNING

A. IMPORTANT SAFETY INSTRUCTION

B. SPECIFICATIONS

C. TIMING CHART

D. CONTROL LOCATION

E. BLOCK DIAGRAM

F. CONDUCTION VIEW

G. SCHEMATIC DIAGRAM
H. TROUBLE SHOOTING HINTS
I. REPLACEMENT PARTS LIST

2
WARNING
To prevent from fire or shock hazard,do not expose monitor to any rain or any form of water.High
voltage is inside the monitor so please do not remove the back cover of the cabinet if you are not a qualified
monitor engineer.
Contact the local dealer or the nearest PROVIEW branch office if you need help.

A. IMPORTANT SAFETY INSTRUCTION
Prior to using this service manual,please ensure that you have carefully followed all the procedures outlined in
the user's manual for this product.
1. Read all of these instructions.
2. Save these instructions.
3. Follow all warnings and instructions a marked on the product.
4. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners, use
a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart,stand or tablle.The product may fall,causing serious damage
to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure reliable
operation of the product and to protect it from overheating,those openings must not be blocked or
covered.The openings should never be blocked by placing the product on a bed,sofa, rug, or other similar
surface.This product should not be placed in a built-in installation less proper ventilation is provided.
8. This products should be operated from the type of power source indicated on the marketin label. If you are
not sure of the type of power available, consult your dealer or local power company
9. This product is equipped with a 3-wire grounding type plug,a plug having a third (grounding) pin.This plug
will only fit into a grounding-type power outlet.This is a safety feature,if you are unable to insert the plug
into the outlet,contact your electrician to replace your obsolete outlet.Do not defeat the purpose of the
grounding-type plug.
10. Do not allow anything to rest on the power cord.Do not locate this product where persons will walk on the
cord.
11. If an extension cord is used with this product,make sure that the total of the ampere ratings on the product
plugged into the extension cord to the waplugged into outlet does not exceed 15 ampere.
12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric shock.Never spill liquid of any kind on
the product.
13. Do not attempt to service this product yourself,as opening or removing covers may expose you to
dangerous voltage points or other risks.Refer all servicing to service personnel.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally,when the operating instructions are followed.Adjust only those
controls that are covered by the operating instructions since improper adjustment of other controls may
result in damage and will often require extension work by a qualified technician to restore the product to
normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance,indicating a need for service.

3
B. SPECIFICATIONS
1. Support display colors 16.7M color
2. Active Display Area 304.1mm (H) x 228.01mm (V)
3. Pixel Pitch 0.297(H) x 0.297(V) mm
4. Synchronization Range
A. Horizontal 30