42wp46pcd_531.pdf part of TOSHIBA 42wp46pcd 531 42wp46pcd_531.pdf, TOSHIBA Plasma 42WP47 42wp46pcd

Text preview for : 42wp46pcd_531.pdf part of TOSHIBA 42wp46pcd 531 TOSHIBA Plasma 42WP47 42wp46pcd_531.pdf

Back to : 42wp46pcd_531.pdf | Home

SCHEMATIC DIAGRAM
MODEL : 42WP46P

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETY
PRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.

CAUTION: The international hazard symbols "*" in the schematic diagram and the parts list designate components
which have special characteristics important for safety and should be replaced only with types identical to those in the
original circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.
Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for this
model. Do not degrade the safety of the receiver through improper servicing.

NOTE:
1. RESISTOR Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5%
tolerance carbon resistor, unless otherwise noted as the following marks.
1/2R = Metal or Metal oxide of 1/2 watt 1/2S = Carbon compsistion of 1/2 watt
1RF = Fuse resistor of 1 watt 10W = Cement of 10 watt
K =