Text preview for : pa703a-Model_4200MTRX-X0.pdf part of Keithley pa703a-Model 4200MTRX-X0 Keithley SCS 4200 pa703a-Model_4200MTRX-X0.pdf
Back to : pa703a-Model_4200MTRX-X0. | Home
Model 4200 MTRX-X Triax Cable Assembly
Packing List
Description
The Model 4200-MTRX-X Triax Cable connects the installed Source-Measurement Unit (SMU) in the Model 4200-SCS
(Semiconductor Characterization System) to the device under test (DUT).
Model 4200-MTRX-X (Figure 1) consists of standard triax cable terminated with a miniature male triax connector on one end
and a standard 3-slot male triax connector on the other end.
The miniature triax connector mates to the FORCE connector on the 4210-SMU or 4200-SMU installed in the system. The
standard triax connector connects to the test fixture or probe station holding the DUT.
CAUTION The Model 4200-MTRX Triax Cable is intended for connection only to an SMU that
does not have a PreAmp installed. NEVER make connection to any miniature triax
connector on an SMU if a PreAmp is installed. Otherwise, damage to the SMU
and/or the DUT, and/or corrupt data may occur.
The 4200-MTRX-X is available in three lengths. The -X in the model number represents the cable length in meters,
as listed in Table 1.
Table 1
Cable lengths
Model no. Cable length
4200-MTRX-1 1 meter
4200-MTRX-2 2 meters
4200-MTRX-3 3 meters
Figure 1
Model 4200-MTRX-X cable
Electrical specifications
Electrical Impedance: 50
Frequency Range: 0 - 4GHz
Working Voltage:
Inner Shield to Outer Shield: 250 VDC
Ctr. Conductor to Outer Shield: 250 VDC
Ctr. Conductor to Inner Shield: <100V
Insulation Resistance: 1