Sharp_LC-32SD1E_LC-26SD1E_Schematic_[SM][SCH].pdf part of Sharp Sharp LC-32SD1E LC-26SD1E Schematic [SM][SCH] Sharp_LC-32SD1E_LC-26SD1E_Schematic_[SM][SCH].pdf, Sharp Monitor Sharp_LC-32SD1E_LC-26SD1E_Schematic

Text preview for : Sharp_LC-32SD1E_LC-26SD1E_Schematic_[SM][SCH].pdf part of Sharp Sharp LC-32SD1E LC-26SD1E Schematic [SM][SCH] Sharp Monitor Sharp_LC-32SD1E_LC-26SD1E_Schematic_[SM][SCH].pdf

Back to : Sharp_LC-32SD1E_LC-26SD1E | Home

LC-26SD1E/RU, LC-32SD1E/RU
CHAPTER 10. SCHEMATIC DIAGRAM
LC-26SD1E
Service Manual

[1] DESCRIPTION OF SCHEMATIC DIA-
GRAM
VOLTAGE MEASUREMENT CONDITION:
1. The voltages at test points are measured on exclusive AC adaptor
and the stable supply voltage of AC 230V.
Signals are fed by a colour bar signal generator for servicing pur-
pose and the above voltages are measured with a 20k ohm/V
tester.

INDICATION OF RESISTOR & CAPACITOR:
RESISTOR
1. The unit of resistance "" is omitted.
(K=k=1000 , M=M).
2. All resistors are