Text preview for : Disassembly & Reassembly.pdf part of Samsung Disassembly & Reassembly Samsung LCD TV 932MW_2032MW_LS19_20PMA Disassembly & Reassembly.pdf
Back to : Disassembly & Reassembly. | Home
3. Disassembly and Reassemble
3. Disassembly and Reassemble
This section of the service manual describes the disassembly and reassembly procedures for the LS19DOV LCD
monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly
Cautions: 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description Picture Description Screws
1. Place monitor face down on cushioned table.
Remove 2 marked screws from the rear
cover.
2. After remove COVER-REAR, ASS'Y-STAND,
then disconnect FUNCTION, SPEAKER wire.
3. After disconnecting SHIELD-LAMP of left
side, disassemble lamp wire between panel
and IP Board.
3-1
3. Disassembly and Reassemble
Description Picture Description Screws
4. Disconnect LVDS cable from panel. Then,
remove cover jack from side.
5. Remove 4 screws of PC and DVI connector.
Then, upset the shield.
6. Remove 8 marked SCREW of left picture.
Disconnect IP board.
Reassembly procedures are in the reverse order of disassembly procedures.
3-2