Text preview for : SC26-3770-0_Assembler_H_Messages_Feb71.pdf part of IBM SC26-3770-0 Assembler H Messages Feb71 IBM 370 asm SC26-3770-0_Assembler_H_Messages_Feb71.pdf
Back to : SC26-3770-0_Assembler_H_M | Home
o
IBM System/360
Operating System
Assembler H
Program Product Messages
Program Number 5734-AS1
This book describes the assembly error diagnostic
messages and the abnormal assembly termination
messages issued by Assembler H. Assembler H is an
assembler language processor for the IBM System/360
Operating System. It performs high-speed assemblies
on an IBM System/360 Model 40 or higher and on
o an IBM System/370 Model 145, 155, or 165 with at
least 256K bytes of main storage.
This book is intended for all Assembler H programmers.
It should be used in conjunction with the Operating
System Assembler Language manual, Order Number
GC28-6514; the Assembler H Language Specifications,
Order Number GC2~3771; and the Assembler H Pro-
grammer's Guide, Order Number SC2~3759.
For each error message, this book describes the
number and text of the message, the explanation
of the error, the assembler's handling of the
error, and the programmer's response to correct
the error. The introduction to this book describes
the format, content, and placement of the error
messages.
o
Page of SC26 -3770-0
Revised February 15, 1971
By TNL SN33-8093
'C
' ....... "'
I'
First Edition (June, 1970)
This edition,with Technical Newsletter SN33-8093, applies to
version 2 of the IBM System/360 Operating System Assembler H
Program Product 5134-ASI and to all subsequent versions until
otherwise indicated in new editions or Technical Newsletters.
Changes to the text, and small changes to illustrations, are
indicated bya vertical line to the left of the change; changed
or added illustrations are denoted by the symbol