Text preview for : ACS-903-01_C_Dec_2014 (QSG).pdf part of Keithley ACS-903-01 C Dec 2014 (QSG) Keithley SCS ACS ACS-903-01_C_Dec_2014 (QSG).pdf
Back to : ACS-903-01_C_Dec_2014 (QS | Home
ACS Software Quick Start Guide
Series 3700A System Switch/Multimeter
Quick Start Guide
Safety precautions Keithley Instruments products are designed for use with electrical signals that are rated
Measurement Category I and Measurement Category II, as described in the International
Electrotechnical Commission (IEC) Standard IEC 60664. Most measurement, control, and data
Observe the following safety precautions before using this product and any associated I/O signals are Measurement Category I and must not be directly connected to mains voltage
instrumentation. Although some instruments and accessories would normally be used with or to voltage sources with high transient overvoltages. Measurement Category II connections
nonhazardous voltages, there are situations where hazardous conditions may be present. require protection for high transient overvoltages often associated with local AC mains
This product is intended for use by qualified personnel who recognize shock hazards and are connections. Assume all measurement, control, and data I/O connections are for connection to
familiar with the safety precautions required to avoid possible injury. Read and follow all Category I sources unless otherwise marked or described in the user documentation. Main
installation, operation, and maintenance information carefully before using the product. Refer to supply voltage fluctuations not to exceed