Text preview for : satellite pro 6100.pdf part of TOSHIBA satellite pro 6100 TOSHIBA Laptop satellite pro 6100.pdf
Back to : satellite pro 6100.pdf | Home
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
GENERAL INFORMATION
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. SELECT BAY REMOVAL
4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY
5. MEMORY MODULE REMOVAL
6. BLUETOOTH CARD REMOVAL
7. MODEM BOARD REMOVAL
8. HDD REMOVAL
9. KEYBOARD REMOVAL
10. WIRELESS LAN CARD REMOVAL
11. TOP COVER REMOVAL
12. VIDEO BOARD REMOVAL
13. COOLING MODULE REMOVAL
14. CPU REMOVAL
15. RTC BATTERY REMOVAL
16. POWER SUPPLY BOARD REMOVAL
17. SD/SOUND BOARD REMOVAL
18. SYSTEM BOARD REMOVAL
19. MEMBRANE SWITCH REMOVAL
20. SPEAKERS REMOVAL
21. 14.1'' DISPLAY MASK REMOVAL
22. FL INVERTER AND 14.1'' LCD REMOVAL
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL
Battery lock
Release
lever
PC card
Battery
Pack Eject button
1. Turn the computer upside down as shown. 1. Press the eject button of the PCCard you want to
2. Slide the battery lock to unlock position. remove.
3. Slide battery release lever in the direction of the 2. Press the extended eject button to pop the PC card
arrow. out.
3. Lift out the battery. 3. Grasp the PC card and remove it.
Note: Before removing any PC Card device, make
sure it is "STOPPED" in the PC Card manager.
SELECT BAY REMOVAL CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM
drive
Base cover
Connector M2x3 silver
flat head
Release lever Select bay screws
device M2x8 silver Connector cover
screws
1. Turn the computer upside down. 1. Remove five M2x3 silver flat head screws securing
2. Slide the release lever in the direction of the arrow. the base cover and lift out the cover.
3. Pull out the select bay device in the direction of the 2. Remove two M2x8 silver screws securing the
arrow. connector cover.
3. Remove the connector cover and the connector
from the CD-R/W/DVD-ROM drive.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
MEMORY MODULE REMOVAL
Memory
slot cover
M2.5x4
black
screws
Memory clips
1. Turn the computer upside down. 4. Spread the memory clips outward and pull the
2. Remove two M2.5x4 black screws securing the memory module out of the connector on a
memory cover. 45 degree angle.
3. Lift out the memory slot cover.
BLUETOOTH CARD REMOVAL
Bluetooth cover M2x4 black screw Glass tape Bluetooth card Coaxial cable
1. Remove one M2x4 black screw securing the bluetooth 3. Disconnect the coaxial cable from the bluetooth card.
cover. 4. Disconnect the bluetooth card from the system
2. Lift out the bluetooth cover. board.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
MODEM BOARD REMOVAL
M2x4 brass screws
Modem
harness
Modem slot
cover
M2.5x4 black screw Modem board
1. Remove one M2.5x4 black screw securing the modem 3. Disconnect the modem harness from the modem
slot cover. board.
2. Insert your finger nail or the case separator into the 4. Remove two M2x4 brass screws securing the
notched side of the cover and lift up to release the two modem board.
latches securing the left side of the modem slot cover. 5. Lift up the modem board to disconnect it from the
system board.
HDD REMOVAL
HDD cover M2.5x6 black flat head screw Plastic Tab HDD pack
1. Turn the computer upside down. 4. Unfold the plastic tab and pull to remove the HDD
2. Remove one M2.5x6 black flat head screw securing from the bay.
HDD cover.
3. Remove the HDD cover.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
HDD REMOVAL KEYBOARD REMOVAL
HDD bracket
Latch
Keyboard
HDD
M3x4 brass flat head screws
Keyboard holder
5. Remove two M3x4 brass flat head screws securing 1. Turn the computer right side up and open the display
the HDD to the bracket and remove the HDDbracket. panel.
2. Using the case separator, unlatch the keyboard
holder at the top of the keyboard.
KEYBOARD REMOVAL
Keyboard
Keyboard
cable
PJ123
M2.5x2.6 black screws
3. Remove two M2.5x2.6 black screws securing the 4. Lift out the keyboard and set it as shown above.
keyboard. 5. Disconnect the keyboard cable from PJ123 on the
system board.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
WIRELESS LAN CARD REMOVAL
Mini-PCI
connector
clips
Mini PCI cover M2x4 black screw Wireless LAN card Black coax cable White coax cable
1. Remove one M2x4 black screw securing the mini 2. Disconnect the black and white coax from the
PCI cover and lift out the cover. wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.
TOP COVER REMOVAL
M2.5x8 silver screws
M2.5x4
black flat
head
screw
M2.5x4 black flat head screws
M2.5x20 black screws
1. Turn the computer upside down and remove the 2. Turn the computer right side up with the rear facing
following screws: you.
-12 M2.5x8 black screws 3. Remove two M2.5x4 black flat head screws
-1 M2.5x4 black flat head screw securing the top cover.
-2 M2.5x20 black screws
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
TOP COVER REMOVAL VIDEO BOARD REMOVAL
LCD/FL
harness
PJ5002
PJ5001
PJ302
PJ310
PJ122
Left/Rigth speaker cable IPS membrane switch Video board M2x4 brass screws
4. Disconnect the left speaker cable from PJ310 and the 1. Remove three 2x4 brass screws securing the video
right speaker cable from PJ311 on the top board. board.
5. Disconnect the LCD/FL harness from PJ5002/5001 and 2. Disconnect the video board from PJ100 on the
the IPS membrane switch from PJ122 on the video board. system board.
6. Lift out the top cover assembly.
Note: When re- installing the top cover, ensure that the bluetooth
coaxial cable is properly routed to the Bluetooth slot.
COOLING MODULE REMOVAL CPU REMOVAL
Close Open
M2.5x6
black
flat head CPU
screws lock
CPU
Cooling
module
M2X4 brass screws PJ8770 Fan cable Silicone grease
1. Disconnect the fan cable from PJ8770 on the top 1. Insert a flat head screwdriver in the CPU lock and
board. rotate it counter-clockwise to unlock the CPU.
2. Remove two M2.5x6 black flat head screws and 2. Lift out the CPU.
four M2x4 brass screws securing the cooling module. NOTE: When installing the CPU, make sure that a silicone
3. Lift out the cooling module. grease is applied before attaching the heat sink.
Please refer to FSB-200112 for the complete
procedures on how to apply the silicone grease.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
RTC BATTERY REMOVAL POWER SUPPLY BOARD REMOVAL
System
board
Power supply
harness
PJ5 RTC harness RTC Battery Power supply board M2.5x4 black flat head screws
1. Disconnect the RTC harness from PJ5 on the 1. Disconnect the power supply harness from PJ850
Battery/LED board. and PJ851 on the system board.
2. Lift out the RTC battery. 2. Remove two M2.5x4 black flat head screws securing
the power supply board.
3. Disconnect the power supply board from the system
board.
SD/SOUND BOARD REMOVAL SYSTEM BOARD REMOVAL
SD
interface HDD guide
cable assy
PJ2150
Sound
Interface
cable
PJ2103 M2.5x6 flat
head black
SD/Sound board screw
Wireless LAN switch button M2.5x4 black flat head screw M2.5x6 black flat head screws Select bay cover
1. Disconnect the sound interface cable from PJ103 1. Remove one M2.5x6 black flat head screw securing
and the SD interface cable from PJ150 on the the HDD guide assembly and lift out the HDD guide
SD/Sound board. assembly.
2. Remove one M2.5x4 black flat head screw 2. Remove three M2.5x6 black flat head screws
securing the SD/Sound board. securingthe select bay cover and lift out the select
3. Remove the wireless LAN switch button. bay cover.
4. Lift out the SD/Sound board.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
SYSTEM BOARD REMOVAL
PJ8800
System
board
DC-IN jack
harness
Heat sink
Plate assy
SDcable Sound cable M2.5x4 black flat head screws
3. Disconnect following cables from the system board: 6. Remove the video chip heat sink plate assembly
-Sound interface cable from PJ302 from the system board.
-SD interface cable from PJ365 NOTE: When re-installing the heat sink plate assembly,
-DC-IN jack harness from PJ8800 make sure that a 0.2g silicone grease is applied
4. Remove four M2.5x4 black flat head screws securing to the video controller IC(IC11).
the system board.
5. Lift out the system board.
MEMBRANE SWITCH REMOVAL SPEAKERS REMOVAL
Membrane Left and right
switch assy speakers
M2.5x4 black flat head screws M2.5x4 black flat head screws
1. Remove three M2.5x4 black flat head screws 1. Remove two M2.5x4 black flat head screws
securing the membrane switch. securing the left and right speakers.
2. Lift out the membrane switch assembly.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
SPEAKERS REMOVAL
LCD panel
Left and Right speakers
2. Turn the display assembly right side up and open
the LCD panel.
3. Lift out the left and right speakers.
TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6100 Series
14.1" DISPLAY MASK REMOVAL FL INVERTER AND 14.1" LCD REMOVAL
LCD module assy
Latch
M2x3 M2x3
Display silver silver
mask screws screws
M2x5 M2x5
silver silver
LCD screws screws
LCD/
FL harness
Mask seals FL inverter board M2x4 silver screw FL cable
1. Remove two mask seals at the bottom corners of the 1. Remove one M2x4 silver screw securing the
display assembly using a pair of fine-tipped tweezers. FL inverter board.
2. Remove two M2.5x6 black flat head screws securing 2. Carefully lift up the FL inverter board and
the display mask. disconnect the LCD/FL cable from CN1 and the
3. There are 23 latches securing the display mask. FL cable from CN2.
Carefully insert your fingers between the mask and the 3. Remove four mask seals to expose four screws
LCD panel and pry open the latches starting from the securing the LCD module assembly.
six top latches, to the five latches on each right 4. Remove four M2X5 silver screws securing the
and left sides, ending with the bottom seven latches. LCD module assembly.
5. Carefully rotate out the top of the LCD module
enough to access the display cable
6. Peel off the tape securing the LCD/FL cable and
disconnect the cable.
7. Remove four M2x3 silver screws securing the
right and left LCD brackets.
TOSHIBA
Tough Enough for Today's World.