Text preview for : 17_SVC GUIDE.pdf part of Samsung 17 SVC GUIDE Samsung DVD DVD-V5500 17_SVC GUIDE.pdf



Back to : 17_SVC GUIDE.pdf | Home

IMPORTANT SERVICE GUIDE
MODE SWITCH (PROGRAM SWITCH) ASSEMBLY POINT

1) When installing the ass'y deck on the Main PCB, be sure to align the assembly point of mode switch.




ASSEMBLY POINT




VCR MAIN PCB

Fig. 1

HOW TO EJECT THE CASSETTE TAPE
(If the tape is stuck in the unit)

1) Turn the Gear Worm OE clockwise in the direction of arrow with a screwdriver. (See Fig. 2)
(Other method ; Remove the screw of Motor Load Ass'y, Separate the Motor Load Ass'y)
2) When Slider S, T approachs the unloading position, rotate holder Clutch counterclockwise after inserting screwdriver in the
frame's bottom hole in order to wind the unwound tape. (Refer to Fig. 3)
(If you rotate Gear Worm OE continuously when tape is unwinding, you may cause tape contamination by grease and
tape damage. Be sure to wind the unwound tape with the unit in the horizontall position.)
3) Rotate Gear Worm OE clockwise using a screwdriver until the mecha is in the eject state. Remove the tape. (Refer to Fig. 2)




FRAME




OE GEAR WORM




Fig. 2 Fig. 3