Text preview for : GC26-4035-0_Assembler_H_Version_2_General_Information_Dec81.pdf part of IBM GC26-4035-0 Assembler H Version 2 General Information Dec81 IBM 370 asm GC26-4035-0_Assembler_H_Version_2_General_Information_Dec81.pdf
Back to : GC26-4035-0_Assembler_H_V | Home
GC26-4035-0
File No. S370-21
o
Assembler H Version 2:
Program Product General Information
Program Number 5668-962
Release 1.0
o
- ---- -
----
- - ---
-~
- ---------
o ----
----_.-
-.
-~---
This publication was produced using the
IBM Document Composition Facility
o
(program number 5748-XX9) and
the master was printed on the IBM 3800 Printing Subsystem.
First Edition (December 1981)
This edition applies to Version 2, Release 1.0, of Assembler H,
Program Product 5668-962, and to any subsequent releases until
otherwise indicated in new editions or technical newsletters.
The changes for this edition are summarized under "Summary of
Amendments" follo~oJing the preface. Specific changes are indicated
by a vertical bar to the left of the change. These bars will be
deleted at any subsequent republication of the page affected.
Editorial changes that have no technical significance are not
noted.
Changes are periodically made to the information herein; before
using this publication in connection with the operation of IBM
systems, consult the latest IBM System/370 and 4300 Processors
Bibliography, GC20-0001, for the editions that are applicable and
current.
It is possible that this material may contain reference to; or
information about, IBM products (machines and programs),
programming, or services that are not announced in your country.
Such references or information must not be construed to mean that
IBM intends to announce such IBM products, programming, or
services in your country.
Publications are not stocked at the address given below; requests
for IBM publications should be made to your IBM representative or
to the IBM branch office serving your locality.
A form for reader's comments is provided at the back of this
pUblication. If the form has been removed, comments may be
addressed to IBM Corporation, P.O. Box 50020, Programming
Publishing, San Jose, California, U.S.A. 95150. IBM may use or
distribute any of the information you supply in any way it
believes appropriate without incurring any obligation whatever.
You may, of course, continue to use the information you supply.
o