Hitachi_P50S601_P50V701_P50X901_DW3_[SM].pdf part of Hitachi Hitachi P50S601 P50V701 P50X901 DW3 [SM] Hitachi_P50S601_P50V701_P50X901_DW3_[SM].pdf, Hitachi Monitor Hitachi_P50S601_P50V701_P50X901_DW3

Text preview for : Hitachi_P50S601_P50V701_P50X901_DW3_[SM].pdf part of Hitachi Hitachi P50S601 P50V701 P50X901 DW3 [SM] Hitachi Monitor Hitachi_P50S601_P50V701_P50X901_DW3_[SM].pdf

Back to : Hitachi_P50S601_P50V701_P | Home

PA No. 0226
P50X901/DW3D
P50V701/DW3D
SERVICE MANUAL P50S601/DW3F

NTSC
NT SC D
D 3
P W1 R/C: CLU-4372A / CLU-123S P50X901
R/C: CLU-4374A P50V701
NTSC
AT SC A hassis
C R/C: CLU-4373A P50S601

This ADDENDUM is made due to the new models P50X901 (DW3D), P50V701 (DW3D) and P50S601 (DW3F).
They are different to models P50H401 (DW3A), P50T501 (DW3A) and P50H4011 (DW3A). The Main difference is the
panel, the X/V/S models use "AF1" Plasma Panel and the H/T Models use "AE1" Plasma Panel. Software (Digital Main PWB)
is also different because of Plasma Panel difference.
Refer to Service Manual PA0224 when servicing X/V/S models in regards to other adjustments not covered in this addendum.
This ADDENDUM indicates only the differences and special considerations to be taken when servicing the X/V/S models.

CONTENTS
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FINAL WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
QUICK DISASSEMBLY GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CIRCUIT SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PRINTED CIRCUIT BOARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PANEL PART S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
QUICK REFERENCE PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so. Before servicing this chassis, it is important that technician
read the "IMPORTANT SAFETY INSTRUCTIONS" in Service Manual PA0224.
SAFETY NOTICE
USE ISOLATION TRANSFORMER WHEN SERVICING
Components having special safety characteristics are identified by a ! on the schematics and on the parts list in this
Service Manual and on the PA0224. Before servicing the chassis, it is important that the service technician read and
follow the "Important Safety Instructions" shown in Service Manual PA0224.

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

PLASMA DISPLAY PANEL
MAY 2007 HHEA-MANUFACTURING DIVISION
DW3
SPECIFICATIONS

APPEARANCE

Model name Series Name Cabinet Design
P50X901 Director's High Gloss Black/Frame, High Gloss Black/Bezel, High Gloss Hidden/SP
P50S601 UltraVision High Gloss Black/Frame, Black/Bezel, High Gloss Hidden/SP
P50V701 UltraVision High Gloss Black/Frame, Black/Bezel, High Gloss Hidden/SP

SYSTEM

Channel coverage band Reception system
No. Model name VHF(ch) UHF(ch) CATV(ch) NTSC ATSC 64QAM/
(8VSB) 256QAM
1 P50X901 213 1469 A-5A-1, A
I,J W,W+1W+94 X X X
2 P50S601 X X X
3 P50V701 X X X

STRUCTURAL DIMENSIONS

No. Model name WIDTH HEIGHT DEPTH WEIGHT
[mm] [mm] [mm] [kg] Note
Without table
1 P50X901 1250 885(817) 423(134) 50.9(44.8)
top stand.
2 P50S601 1241.4 884(820.2) 422.7(129) 49.8(43.7)
3 P50V701 1241.4 884(820.2) 422.7(129) 49.9(43.8)

EXTERNAL TERMINALS AND JACKS

Model Rear
name A/V S COMP. HDMI M A Subwoofer ANT OPT DV IN POD
IN IN IN OUT OUT OUT IN OUT IEEE 1394 CARD
P50X901 3 1 2 2 1 1 1 1 1
P50S601 3 1 2 2 1 1 1 1
P50V701 3 1 2 2 1 1 1 1 1

Model Front Rear
name A/V S COMP. HDMI Photo Upgrade DV IR OUT IR OUT SWIVEL RS232C
IN IN IN (SD) IN /G-LINK OUT
P50X901 1 1 1 Common 1 1 1 1
P50S601 1 1 1 Common (1: Service) 1 1
P50V701 1 1 1 Common 1 1 1 1

TABLE OF CONTENTS 2
DW3

MAIN FEATURES

P50 P50 P50
No. Feature
X901 S601 V701
1 Panel AF1 AF1 AF1
1920x 1920x 1920x
2 Resolution
1080i 1080i 1080i
Front Filter with ARF Mesh Mesh Mesh
3
(Transparency) (36%) (41%) (36%)
4 Seine2 X X X
5 FRC (FC8) X X
6 One NTSC/ATSC Tuner X X X
7 POD (Point Of Deployment) X X
8 PinP (Digital/External Analog SPLIT) X X
9 3 Picture Mode X X X
10 Color Temperature Mode 4 4 4
11 Color Decoding Adjustment X
12 Color Management Adjustment X
13 7 Mode Aspect Ratio Interchangeable X X X
14 EPG (G-GUIDE) Function X X
15 SD-card Photo Viewer X X
16 Audio Output 10W x2 10W x2 10W x2
17 Swivel Power Power Power
18 AV NET, AV NET Learning X X
19 IR Pass Through X X
20 OSD Design Direc. B C
21 Energy Star

POWER CONSUMPTION

MODEL INDICATED VALUE PST [W] CHASSIS
NAME Max. Rating Max. Rating (Average Rating) Without POD With POD
P50X901 605W 5.7A 364W 0.6W 14W DW3D
P50S601 587W 5.3A 350W 0.6W - DW3F
P50V701 605W 5.7A 364W 0.6W 14W DW3D

SAFETY KEY COMPONENTS

Symbol.No. / P/N / Spec. Model
F9A1 / P#FN00551 / Fuse
P50X901, P50V701, P50S601
10A

TABLE OF CONTENTS 3
DW3
ADJUSTMENTS

NOTE: The next adjustment procedure is only for the P50X901, P50V701 and the P50S601, refer to the service manual PA
no. 0224 for all the other adjustments.

VIDEO COLOR TEMPERATURE ADJUSTMENT - BLACK AND WHITE MODE.

-Preparation
(1) Set the output of signal generator to white raster (Ratio: 100%).
(2) Component signal (480i)
Video level: 0.7Vp-p
SYNC: 0.3Vp-p
Set-up level: 0V
(3) Input white raster signal into COMPONENT input terminal.
(4) Set user control to Day (Dynamic) mode (Picture mode).
(5) Confirm that the mode is set as `Factory setting mode'.
(6) Aspect: 4:3 Expanded.

-Adjustment
(1) Perform the following adjustment with the remote control.
(2) Set the CRT color analyzer (CA-100) at the center of the panel.
(3) Ensure that the adjustment parameters R/G/B DRIVE(B/W) are all set as FF.
(4) After receiving the PC signal, reduce the value of two (or only one) of the RGB adjustment
parameters step down two (or one) among adjustment R/G/B DRIVE(B/W) and adjust the value
shown below.

Specification
Video Color temperature (B/W)

x = 0.335