Text preview for : clarion_db125_servis_192.pdf part of clarion clarion db125 servis 192 clarion DB-125 clarion_db125_servis_192.pdf
Back to : clarion_db125_servis_192. | Home
Clarion ( Malaysia) Sdn. Bhd.
Published by Clarion (Malaysia)
To engineers in charge of repair or that the laser optical diode lights up, keep your eyes
Phase 3, Free Trade Zone One, 11900 Bayan Lepas, Penang, Malaysia more than 30cms away from the lens. Prolonged
298-5945-00 MAR. 2002P
Tel: (60) 4-6439-106, Fax: (60) 4-6439-108
Clarion Co. Ltd. Printed In Malaysia inspection of our products. viewing of the laser within 30cms may damage your
Export Division : 5-35-2, Hakusan, Bunkyouku, Tokyo, 112-8608 Japan Tel: 03-3400-1121
eyesight.
Service Manual
Before repair or inspection,make sure to follow the 9. Cautions in handling the optical pickup
instructions so that customers and Engineers in charge of The laser diode of the optical pickup can be damaged
repair or inspection can avoid suffering any risk or injury. by electrostatic charge caused by your clothes and body.
Make sure to avoid electrostatic charges on your clothes
1. Use specified parts. or body, or discharge static electricity before handling
The system uses parts with special safety features the optical pickup.
against fire and voltage. Use only parts with equivalent 9-1.Laser diode
characteristics when replacing them. The laser diode terminals are shorted for transportation
in order to prevent electrostatic damage. After
AM/FM RADIO CD COMBINATION The use of unspecified parts shall be regarded as re-
replacement, open the shorted circuit. When removing
modeling for which we shall not be liable.The onus of
product liability (PL) shall not be our responsibility in the pickup from the mechanism, short the terminals by
cases where an accident or failure is as a result of soldering them to prevent this damage.
Model DB125 unspecified parts being used.
2. Place the parts and wiring back in their original
9-2.Actuator
The actuator has a powerful magnetic circuit. If a
(Model:PE-2504B-A) For U.S.A positions after replacement or re-wiring. magnetic material is put close to it. Its characteristics
For proper circuit construction, use of insulation tubes, will change. Ensure that no foreign substances enter
(Model:PE-2506K-A) For Other Countries through the ventilation slots in the cover.
bonding, gaps to PWB, etc, is involved. The wiring con-
nection and routing to the PWB are specially planned 9-3.Cleaning the lens
using clamps to keep away from heated and high volt- Dust on the optical lens affects performance. To clean
age parts. Ensure that they are placed back in their the lens, apply a small amount of isopropyl alcohol to
original positions after repair or inspection. lens paper and wipe the lens gently.
If extended damage is caused due to negligence dur-
ing repair, the legal responsibility shall be with the re-
pairing company. CAUTIONS
SPECIFICATIONS NOTE 3. Check for safety after repair. Use of controls, adjustments, or performance of
1. We cannot supply PWB with component parts in Check that the screws, parts and wires are put back procedures other those specified herein, may resault in
Radio section
principle. When a circuit on PWB has failure, please securely in their original position after repair. Ensure hazardous radiation exposure.
Model: PE-2504B-A
repair it by component parts base. Parts which are for safety reasons there is no possibility of secondary The compact disc player should not be adjustment or
Tuning system: PLL synthesizer tuner problems around the repaired spots.
not mentioned in service manual are not repaired by anyone expext properly qualified service
Receiving frequencies:FM 87.9 to 107.9MHz (0.20 MHz steps) If extended damage is caused due to negligence of re-
supplied. personnel.
AM 530 to 1,710kHz (10 kHz steps) pair, the legal responsibility shall be with the repairing
Model: PE-2506K-A FEATURES company.
Tuning system: PLL synthesizer tuner 1. Rotary Encoder Volume Control 4. Caution in removal and making wiring connection to (Model:PE-2504B-A)
Receiving frequencies:FM 87.5 to 108MHz (0.05 MHz steps) 2. Z-Enhancer with 3 Mode Sound Selector the parts for the automobile.
AM 531 to 1,602kHz (9 kHz steps) Disconnect the battery terminal after turning the igni-
3. MAGI-TUNE