Text preview for : LG_LAS465B_SH3K_AFN77441554.pdf part of LG LG LAS465B SH3K AFN77441554 LG Audio LAS465B LG_LAS465B_SH3K_AFN77441554.pdf
Back to : LG_LAS465B_SH3K_AFN774415 | Home
Internal Use Only
SERVICE MANUAL
2.1 ch Wireless Sound Bar
SERVICE MANUAL
MODELS: LAS465B (LAS465B, SPH4B-W)/ SH3K (SH3K, SPH4B-W)
MODELS: LAS465B (LAS465B, SPH4B-W)
MODEL:S SH3K (SH3K, SPH4B-W)
CAUTION
BEFORE SERVICING THE UNIT, READ THE "SAFETY PRECAUTIONS"
IN THIS MANUAL.
P/NO : AFN77441554 JULY, 2016
CONTENTS
SECTION 1 ........ GENERAL
SECTION 2 ........ CABINET & MAIN CHASSIS
SECTION 3 ........ ELECTRICAL
SECTION 4 ........ WIRELESS SUBWOOFER PART
SECTION 5 ........ REPLACEMENT PARTS LIST
1-1
SECTION 1
GENERAL
CONTENTS
ESD PRECAUTIONS ......................................................................................................................................... 1-3
WIRELESS SUBWOOFER CONNECTION....................................................................................................... 1-4
HIDDEN KEY MODE ......................................................................................................................................... 1-5
ESS / EQ HIDDEN KEY GUIDE ........................................................................................................................ 1-6
ESS / EQ PROGRAM UPDATE GUIDE............................................................................................................ 1-7
SPECIFICATIONS ............................................................................................................................................. 1-8
1-2
ESD PRECAUTIONS
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components
commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated
circuits and some field-effect transistors and semiconductor chip components. The following techniques should
be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off
any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a
commercially available discharging wrist strap device, which should be removed for potential shock reasons
prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface
such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can
generate electrical charges sufficient to damage ESD devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD
devices.
6. Do not remove a replacement ESD device from its protective package until immediately before you are
ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by
conductive foam, aluminum foil or comparable conductive materials).
7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the
protective material to the chassis or circuit assembly into which the device will by installed.
CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL OTHER
SAFETY PRECAUTIONS.
8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion
such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate
static electricity sufficient to damage an ESD device).
CAUTION. GRAPHIC SYMBOLS
THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN AN EQUILATERAL TRIANGLE, IS
INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOLTAGE" THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN SERVICE
LITERATURE.
1-3
WIRELESS SUBWOOFER CONNECTION
LED indicator of wireless subwoofer 4. Disconnect the power cord of the main unit and the
wireless subwoofer.
LED Color Status 5. Connect them again after the LED of the main unit
and the wireless subwoofer is fully turned off.
Yellow-green
Attempting to make connection. The main unit and the wireless subwoofer will be
(Blink)
paired automatically when you turn on the main unit.
Yellow-green The connection is completed. - When the connection is completed, you can see
Red/ Yellow green The wireless subwoofer the yellow-green LED on the subwoofer.
(Blink alternately) connection is initialized.
Off The power cord of wireless Note:
(No display) subwoofer is disconnected.