Text preview for : Disassembly & reassembl.pdf part of Samsung Disassembly & reassembl Samsung Proj TV SP-43J6HDX ch.M51A Disassembly & reassembl.pdf



Back to : Disassembly & reassembl.p | Home

Disassembly and Reassembly



4. Disassembly and Reassembly

4-1 Back Cover Removal

1. After removing the screws, pull the bottom and side holder part of the cabinet back wards.




2. Loosen the screws and remove the supporter. 3. After loosening the screws, remove the lens
cover and fan duct.




4. Loosen the screws. Remove the front mask.




Samsung Electronics 4-1
Disassembly and Reassembly


4-2 Lamp Replacement

1. Loosen the screw. 2. Remove the cover.




3. Using a (-)driver, loosen the screw that secure 4. Pull out the lamp.
the lamp.




5. PROCEDURE (1) Select 01 (lamp life) with using the joystick
downward, then moving the joystick to right
After completing the lamp replacement, enter directior(See the figure below).
the Service Mode
Press the remote control Keys in the following (2) Press the Cancel key to reset the lamp life
sequence: ("00000").

"Display P.STD Mute Power" (3) Press the Power key to save the factory
value.

(4) Press the DISPLAY key to verify that the
lamp use time is