Text preview for : PA-1047 (A - Dec 2011)(CA-562).pdf part of Keithley PA-1047 (A - Dec 2011)(CA-562) Keithley Cable PA-1047 (A - Dec 2011)(CA-562).pdf
Back to : PA-1047 (A - Dec 2011)(CA | Home
Model CA-562
Keithley Instruments, Inc. Safety Banana-Plug Jumper Cable
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
http://www.keithley.com
Description
The Model CA-562 is a 10-in. (25.4 cm) jumper cable that has a 0.24 in. (6 mm) banana plug connector on one end
and a 0.16 in. (4 mm) banana plug connector on the other end.
Figure 1: Model CA-562-2
This cable can be used for high-current testing with the Model 8010 High Power Device Test Fixture. It connects
the Model 2651A High Power System SourceMeterInstrument force signal paths in the test fixture to the device
test board.
The cable is available in two different colors (see table below).
Model number Color
CA-562-0 Black
CA-562-2 Red
Electrical characteristics
Working voltage, hand-held: 30 V AC and 60 V DC maximum
Working voltage, hands-free: 5000 V DC
Current (continuous): 15 A DC maximum
Current (pulse): 100 A for 1 ms maximum at 1 percent duty cycle maximum
PA-1047 Rev. A / December 2011 1