Text preview for : 25-8194-0_01-10_Typewriter_CE_May44.pdf part of IBM 25-8194-0 01-10 Typewriter CE May44 IBM typewriter 25-8194-0_01-10_Typewriter_CE_May44.pdf
Back to : 25-8194-0_01-10_Typewrite | Home
MANUAL OF INSTRUCTION
CUSTOMER ENGINEERING
IBM ELECTRIC TYPEWRITERS
MODELS 01-10
INTERNATIONAL BUSINESS MACHINES CORPORATION
590 MADISON AVENUE, NEW YORK, NEW YORK
FORM 25-8194-0
PART #1067094
Printed in U.S.A.
INTERNATIONAL BUSINESS MACHINES CORPORATION
ELECTRIC TYPEWRITER DIVISION
FOREWORD
The purpose of this manual is to assist customer engineers
in the servicing of mM Electric Typewriters.
This manual is compiled from methods and adjustments
used at the factory, together with suggestions from the field
which have. been approved by the Engineering Department.
It represents methods that experience has proved best. in
servicing the equipment.
As new developments and improvements are introduced,
new sections and additional pages to the present sections
may be added to this manual. It is in loose-leaf form so
that new material can be easily added.
GENERAL INSTRUCTIONS FOR ORDERING PARTS
A. BRANCH OFFICE STOCK PARTS
1. Use Supply and Parts Requisition Form No. 606-0 for supplies
and parts when shipment is to be made direct to the sales office.
Make up in five copies and send the first four copies of the form
to the Order Department in Rochester. Retain the pink copy for
your flIes.
a. Be sure to fill in branch name and number, date, and local
number and have signed by the supervisor in charge of EWM
Customer Engineering.
b. Use separate orders for parts, ribbons and tools.
c. Fill in all prices and extensions where applicable.
d. Fill in "Quantity in Stock" Column on each item.
2. Use complete part numbers when ordering parts. Place part
numbers in numerical sequence on order blank. If number and
name do not agree, the order will be filled from the number.
3. All platen orders will be filled with standard 33 tooth ratchets
unless otherwise specified on the order.
4. Use complete part numbers in requisitioning ribbons and specify
inking.
5. When ordering type bars specify whether Pica, Elite, Pica GothiC,
etc. and also give the position number of the type bars. In the
case of characters other than Standard, give catalog location in
Type Available Catalog. Key Quttons will not be sent with type
bars unless ordered.
B. CUSTOMER PARTS SHIPPED DIRECT
1. Use House order 95-6016-0 (green) for parts which are to be
shipped direct to customers. Make up in duplicate. Send the
original to the Order Department in Rochester and retain the
second copy for your files.
a. Be sure to fill in date, branch order number, customer pur-
chase order number, and shipping instructions.
b. Follow instructions given above with reference to part num-
bers, platens, type and ribbons.
May 1, 1944
INDEX
Aligning Type Sec. 20 Radio Filter Sec. 1
Back Space Mechanism 9 Rails 4
Bell Cranks 3 Register Pih Gage 17
Cam Units 3 Resistor and Condenser 1
Carbon Blades 18 Ribbon Control 6
Carbon Blade Holder 18 Ribbon Feed 6
Carbon Carrier Attachment 18 Ribbon Guide 6
Carbon Paper Ribbon Attachment 19 Ribbon Reverse 6
Carriage 4 Ring and Cylinder 20
Carriage Return 11 Shut 10
Carriage Trucks 4 Shipping Instructions 24
Clutch 11 Space Bar 7
Ediphone Typease Extension 22 Stroke Counters 16
Escapement Mechanism 5 Switch 1
Ditto 23 Tabular 8
Formswriter 26 Tabular Friction Governor 8
Front Feed Position Plate 18 Terminal Block 1
Governor 1 Toll Biller 28
Hektowriter 21 Type Guide 20
Installing Machines 25 Type Bars 5
Inspections Gen. Info. Universal Bar 5
Key Buttons :3 Wiring Diagram 1
Key Button Filler 3 Worm Drive 2
Key Lever 3