DSC-400 distortion SB 2002-001.pdf part of JBL DSC-400 distortion SB 2002-001 DSC-400 distortion SB 2002-001.pdf, JBL Audio DSC-400 DSC-400 distortion SB 2002-001.pdf text manual preview

Text preview for : DSC-400 distortion SB 2002-001.pdf part of JBL DSC-400 distortion SB 2002-001 JBL Audio DSC-400 DSC-400 distortion SB 2002-001.pdf

Back to : DSC-400 distortion SB 200 | Home

Service Bulletin
Service bulletin # JBL2002-001 February 2002

To: all JBL Service Centers

Models: DSC 400 Sub

Subject: Distortion

In the event, you receive a DSC 400 SUB with the complaint: Distortion in some music passages.
The muting level will in some cases add distortion to the sound. To solve this change resistor R34 from 3K3 to 2K2
on Main Amp board.

Part needed: 1 resistor 2k2

1. Remove the amp module by removing the 10 screws around the heatsink. And place the unit as showed in picture 1.

Picture 1 : ready for rework Picture 2: shows the place to unsolder the resistor

2. Remove resistor R34 ; see picture 2

3. Add the new resistor ( The easy way to place the resistor is to put it on the solder side )

4. Assemble the unit and test the sound and the features.

Harman International SNC - Harman Consumer International 2, route de Tours 72500 Ch