Text preview for : PA-1040 (A - Dec 2011)(CA-557).pdf part of Keithley PA-1040 (A - Dec 2011)(CA-557) Keithley Cable PA-1040 (A - Dec 2011)(CA-557).pdf
Back to : PA-1040 (A - Dec 2011)(CA | Home
Model CA-557
Keithley Instruments, Inc. 8-Pin Male (Receptacle Housing) Cable Assembly
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
http://www.keithley.com
Description
The Model CA-557 is an 8-pin male (receptacle housing) to 8-pin male (receptacle housing) cable assembly with a
straight through pin configuration. This cable is used to route the sense leads and guard signal of the Model 2651A
SourceMeter to a Model 8010 High Power Device Test Fixture or a Model 8011 High Power Device Test Socket.
You can order this cable in three different lengths (see table below).
Model number Cable length
CA-557-1 3.28 ft (1.0 m)
CA-557-2 6.56 ft (2.0 m)
CA-557-3 9.84 ft (3.0 m)
Figure 1: Model CA-557
Electrical characteristics
Screw terminal connection: 0.20 in. pitch (0.5 cm)
Applicable wire size: 24 - 12 AWG
Supplied wire size: 22 AWG
Nominal working voltage: +/- 250 V
Maximum peak voltage +/- 320 V
Maximum amperage: 12 A
PA-1040 Rev. A / December 2011 1