Text preview for : H20-0185-1_1440_ATS_termOpe.pdf part of IBM H20-0185-1 1440 ATS termOpe IBM 144x H20-0185-1_1440_ATS_termOpe.pdf
Back to : H20-0185-1_1440_ATS_termO | Home
-=:===- - -
--
___
-
-
-
1--..--
-
- ==: -.....-
--
=---- -
_--
--~-
=:= ==-
- -~-
-~-
- ':' - Application Program H20-018S-I
144[J/14S[J Administrative Terminal System (ATS)
(144[J-CX-[J7X and 14S[J-CX-[J8X)
Terminal [Jperator's Manual
This system consists of control and functional
programs that permit many different text-
processing activities to be carried on
simultaneously through different terminals.
This manual is a reference manual which
includes all information required by a
t~erminal operator t:o use the program.
This revision (H20-0l85-l) contains many clarifications and Minor
revisions to 1120-0185-0. It should be ~eviewed in its entirety. The
mos~ significant changes are:
1. In the section "Storage Reports" all references to the ATTNq
action should be replaced by references to ATTN !g, for
Version 2 and later revisions of the program.
2. In the section "Storage and Retrieval from Tape", note that
there is a message "TAPE" printed at the terminal if there
are any errors in reading ~r writing magnetic tapes. The
transfer request should be repeated if this message occurs.
3. In the section "Upper- and Lowercase Chain Printer Output"
revised overstrike codes are provided in Version 2 and later
revisions of the program to permit easy recognition of all
120 characters.
This publication was prepared for production using the IBM 1440/1460
AdMinistrative Terminal System. Page impressions for photo-offset
printing were obtained from a typewriter terminal and then reduced
15 percent.
Copies of this and other IBM publications can be obtained through IBM
Branch Offices. Comments on this publication should be addressed t:o:
IBH Corporation, Technical Publications Department, 112 East Post
Road, White Plains, New York 10601.
CONTENTS
--
INTRODUCTION ............................................. 1
THE 'I.'ERMINAI.I ............................................. . 2
General