Text preview for : Bupl305e.pdf part of Rohde & Schwarz Bupl305e Rohde & Schwarz R&S UPL Document Set Bupl305e.pdf
Back to : Bupl305e.pdf | Home
R&S UPL Previous/Actual Data Comparison
Supplement to the R&S UPL Manual
The R&S UPL software version 3.02/3.03 has been upgraded to 3.04/3.05.
The modifications in 3.04 and 3.05 are described below.
Brief Overview
GENERATOR panel:
Previously ... Now ...
... frequency sweeps were only possible with ... this error is eliminated.
an activated equalizer when you selected at
least three sweep points. With only two For manual control, see
sweep points, a wrong output level was set. 2.5.4.1.3 Equalization of SINE, SINE BURST,
DFD, MULTISINE, RANDOM
For IEC/IEEEbus command, see
3.10.1.4.2 Sweep Settings for Gen. SIN, STER,
BURS, S2P, MDIS,DFD, DC
... in the RANDOM Domain TIME function, ... this noise generator has been improved in such a
acoustically interfering periodic artfacts were way that there is no periodicity anymore.
audible but irrelevant to measurements.
For manual control, see
2.5.4.9 RANDOM
For IEC/IEEEbus command, see
3.10.1.5.7 RANDOM
... negative phase parameters were allowed in ... this error is eliminated.
the MULTISINUS function but were inter-
nally limited to 0