Text preview for : Sharp_LC-24LE210EH_[SM].pdf part of Sharp Sharp LC-24LE210EH [SM] Sharp Monitor Sharp_LC-24LE210EH_[SM].pdf
Back to : Sharp_LC-24LE210EH_[SM].p | Home
LC-24LE210EH
SERVICE MANUAL
SE01LC24LE210
Issued: 11th February 2011
LED LCD COLOUR TELEVISION
DVB-T / DVB-C (HDTV), PAL B/G, I / SECAM B/G, D/K, L/L' SYSTEM COLOUR TELEVISION
MODEL
LC-24LE210EH
OUTLINE
This model is based on the LC-24LE210E and par- In the interests of user safety (required
tially modified for a defined Hotel Mode. by safety regulations in some countries)
For the contents not covered in this Service Man- the set should be restored to its original
ual, accordingly, please refer to the LC-24LE210E condition and only parts identical to those
Service Manual (No. SE00LC24LE210). specified should be used.
CONTENTS
OUTLINE AND DIFFERENCES FROM BASE MODEL ......................................................... 2
IMPORTANT SERVICE SAFETY PRECAUTIONS...................................................... 3
SERVICE ADJUSTMENTS ..................................................................................... 6
REPLACEMENT PARTS LIST .................................................................................. 7
SHARP CORPORATION This document has been published to
be used for after sales service only.
The contents are subject to change without notice.
1
LC-24LE210EH
OUTLINE AND DIFFERENCES FROM BASE MODEL
OUTLINE
This model is based on the LC-24LE210E and partially modified for a defined Hotel Mode. This Hotel mode only works
in case some signal appears through HDMI 1 terminal. In this condition the functionality of Remote Control is limited.
For the contents not covered in this Service Manual, accordingly, please refer to the LC-24LE210E Service Manual
(No. SE00LC24LE210).
DIFFERENCES FROM BASE MODEL
1. The only change for this derivative model is the specific software version ("24LE210EHE_v1.0_PANEL_CMI_BOARD_
N1" or upper.)
2. In case IC1007 is replaced, proceed to update the software to the above detailed.
Ref. No. Description LC-24LE210E LC-24LE210EH Note
PRINTED WIRING BOARDS ASSEMBLIES
- MAIN / LED Unit Set DSETUF639WE06 DSETUF639WE11 Software changed
CABINET & MECHANICAL PARTS
- Labels set DLAB-D014WE01 DLAB-D871WE01 Labels set changed
2
LC-24LE210EH
IMPORTANT SERVICE SAFETY PRECAUTION
Service work should be performed only by qualified service technicians who are thoroughly familiar with all
safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted.
2. Disconnect AC power before servicing.
CAUTION: FOR CONTINUED PROTECTION AGAINST A RISK OF
FIRE REPLACE ONLY WITH SAME TYPE F101 (T2.5AH / 250V)
BEFORE RETURNING THE RECEIVER (Fire & Shock Hazard)
Before returning the receiver to the user, perform the following safety checks:
1. Inspect all lead dress to make certain that leads are not pinched, and check that hardware is not lodged between the
chassis and other metal parts in the receiver.
2. Inspect all protective devices such as non-metallic control knobs, insulation materials, cabinet backs, adjustment and
compartment covers or shields, isolation resistor-capacitor networks, mechanical insulators, etc.
3. To be sure that no shock hazard exists, check for leakage current in the following manner.