Text preview for : Disassembly & Reassembly.pdf part of Samsung Disassembly & Reassembly Samsung Monitor Monitor 2493HM chassis LS24KIE Disassembly & Reassembly.pdf
Back to : Disassembly & Reassembly. | Home
3. Disassembly and Reassemble
3. Disassembly and Reassemble
This section describes the disassembly and reassembly sequences for this monitor.
WARNING: As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Cautions: 1. Turn the monitor off before beginning the disassembly process.
2. Disassemble the monitor carefully as directed in the following procedures.
3. When disassembling the monitor, do not use any metal tools except for the provided jig.
Part Description Picture Description Screws
1. Place the monitor down onto a table
covered by a soft cloth and remove
the 4 screws from the stand.
2. Remove 4 screws.
Stand
3-1
3. Disassembly and Reassemble
Part Description Picture Description Screws
3. Seperate the Inverter Cable from the
SMPS.
Inverter
Cable
4. Remove the LVDS cable.
5. Remove the cable from the
SHIELD-COVER.
ASSY
CHASSIS 6. Remove the cable.
7. Remove the hexagonal screws from
the bottom of the Shield.
3-2
3. Disassembly and Reassemble
Part Description Picture Description Screws
8. Seperate the Function Cable and the
Speaker Cable from the Main Board.
Function Wire
9. Remove the four (4) screws from both
sides of the speakers.
Speaker
10. Remove the Panel and Chassis,
separate the Speaker and Function
wire from the Decoration and then
separate the Decoration.
Decoration
11 Remove the 9 screws, lift the board,
and seperate the cable.
Main Board
SMPS
3-3
3. Disassembly and Reassemble
Part Description Picture Description Screws
12. Assemble the product in the reverse
order of the disassembly. When
closing the cover, close the lower side
of the cover first.
(Otherwise, the product may be damaged.)
Back Cover
Reassembly procedures are in the reverse order of disassembly procedures.
3-4