toshiba__43-50ph46p_663.pdf part of TOSHIBA toshiba 43-50ph46p 663 toshiba__43-50ph46p_663.pdf, TOSHIBA LCD Proj toshiba__43-50ph46p

Text preview for : toshiba__43-50ph46p_663.pdf part of TOSHIBA toshiba 43-50ph46p 663 TOSHIBA LCD Proj toshiba__43-50ph46p_663.pdf

Back to : toshiba__43-50ph46p_663.p | Home

FILE NO. 030-200407

SERVICE MANUAL

Projection Television
WH4 Chassis

43PH46P
50PH46P

Published in Japan, Jun. 2004 (YC)
SCHEMATIC DIAGRAM
MODEL : 43PH46P/50PH46P

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETY
PRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.

CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components
which have special characteristics important for safety and should be replaced only with types identical to those in the
original circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.
Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for this
model. Do not degrade the safety of the receiver through improper servicing.

NOTE:
1. RESISTOR Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5% tolerance
carbon resistor, unless otherwise noted as the following marks.
1/2R = Metal or Metal oxide of 1/2 watt 1/2S = Carbon compsistion of 1/2 watt
1RF = Fuse resistor of 1 watt 10W = Cement of 10 watt
K =