Text preview for : TEK TDS 500D_252C 600C_252C 700D_252C Reference.pdf part of Tektronix TEK TDS 500D 252C 600C 252C 700D 252C Reference Tektronix TEK TDS 500D_252C 600C_252C 700D_252C Reference.pdf



Back to : TEK TDS 500D_252C 600C_25 | Home

Reference




TDS 500D, TDS 600C & TDS 700D
Digitizing Oscilloscopes
071-0504-00
To Display a Waveform:

1 Attach a probe to CH 1 2 Press 3 Press 4 Adjust VERTICAL and HORIZONTAL
and hook the probe to your CH 1. AUTOSET. POSITION and SCALE.
signal.




Device under test




Copyright E Tektronix, Inc., 1998. Printed in U.S.A.
To Set Up Using a Menu:

1 Press any of the front panel menu buttons. Use SHIFT for
the alternate
(blue) menus.




2 Select an item from the main (bottom) menu.


The readout indicates the
value that you can adjust
3 Select an item from the side menu, if displayed. with the general purpose
knob or keypad.




Adjustable menu item value




4 Adjust menu item values using the general purpose
knob or by entering numbers on the keypad. General purpose knob




Keypad




End your entry by
pressing ENTER ( ).
To Select a Trigger:
Trigger Selections (On some models, Ax 1 & Ax 2 replace Ch 3 & Ch 4)
1 Press TRIGGER MENU. TYPE
TYPE

CLASS CLASS CLASS





Source




Data Source
Define Inputs




Define Inputs
Select any one of Define levels High, Define levels High, Select one of
Ch 1 thru Ch 4, Low, or Don't Care Low, or Don't Care Ch 1 thru Ch 4 as
Line, or DC Aux for Ch 1 thru Ch 4 for Ch 1 thru Ch 3 the data source
2 Select a trigger type or parameter from the Select edge for the Do not select the
main menu.
clock (always Ch 4) same channel used
as the clock source
This symbol

Select one of




Define Logic




Define Logic




Clock Source
indicates a Positive AND AND


Slope
pop-up menu Ch 1 thru Ch 4 as
the clock source

Negative OR OR Select the clock
edge

Do not select the
NAND NAND same channel used
as the data source

3 Set TRIGGER MAIN LEVEL. NOR NOR




Levels
Set Thresholds




Set Thresholds
Set a threshold Set a threshold
Level




Level level for each of level for each of Clock
Ch 1 thru Ch 4 the pattern
channels, Ch 1
thru Ch 3, and
the clock, Ch 4. Data

"T" shows the Arrow shows Title of the
trigger position the trigger level side menu Set level or select Set levels or select
preset level based preset levels based
on TTL or ECL logic on TTL or ECL logic


Select and set the
Coupling




Trigger When




Trigger When




Setup/Hold Times
DC Goes TRUE Goes TRUE Setup Time

Select and set the
AC Goes FALSE Goes FALSE Hold Time



HF TRUE for
Reject less than1


LF TRUE for
Reject more than1

Press to display the pop-up menus Removes the Noise Rej (DC
Press again to make a selection menus from Low Sensitivity)
the screen
A pop-up selection changes the other main
menu items
1Qualification by time
TYPE
TYPE TYPE