Text preview for : pa702a-Model_4200-TRX-X.pdf part of Keithley pa702a-Model 4200-TRX-X Keithley SCS 4200 pa702a-Model_4200-TRX-X.pdf
Back to : pa702a-Model_4200-TRX-X.p | Home
Model 4200 TRX-X Triax Cable Assembly
Packing List
Description
The Model 4200-TRX-X Triax Cable connects the installed 4200-PA (Preamplifier) in the Model 4200-SCS (Semiconductor
Characterization System) to the device under test (DUT).
Model 4200-TRX-X (Figure 1) consists of standard triax cable terminated with a standard 3-slot male triax connector on
each end.
One end connects to the FORCE connector on the 4200-PA installed in the system. The other end connects to the test fixture or
probe station holding the DUT.
The 4200-TRX-X is available in four lengths. The -X in the model number represents the cable length in meters,
as listed in Table 1.
Table 1
Cable lengths
Model no. Cable length
4200-TRX-0.3 0.3 meters
4200-TRX-1 1.0 meter
4200-TRX-2 2.0 meters
4200-TRX-3 3.0 meters
Figure 1
Model 4200-TRX-X cable
Electrical specifications
Electrical Impedance: 50
Frequency Range: 0 - 4GHz
Working Voltage:
Inner Shield to Outer Shield: 250 VDC
Ctr. Conductor to Outer Shield: 250 VDC
Ctr. Conductor to Inner Shield: <100V
Insulation Resistance: 1